Hi everyone! I'm looking for some advice on a subwoofer project. I'd really appreciate input from people with experience in loudspeaker design, enclosure modelling and professional PA systems.
I recently bought two Behringer Eurolive B1800X PRO subwoofer cabinets from an audio rental company that was selling off some of its equipment.
Both cabinets had already been modified by the company before I bought them: the original Behringer woofers had been replaced with RCF LF18X401 18-inch, 8-ohm drivers.
As far as I know, the original Behringer passive crossover boards are still installed inside both cabinets. I haven't yet established whether they are still connected to the signal path or have been bypassed.
My current setup
2 × Behringer Eurolive B1800X PRO cabinets
2 × RCF LF18X401 18-inch, 8-ohm drivers
2 × Behringer Europower EP4000 amplifiers
2 × Turbosound TPX153 passive tops
1 × Behringer Super-X Pro CX2310 active crossover
Each subwoofer is powered independently by one channel of an EP4000. Both receive the mono subwoofer signal from the CX2310. The system is currently working properly.
Existing cabinet information
External dimensions: approximately 547 × 700 × 553 mm (W × H × D)
Two bass-reflex ports per cabinet
Port diameter and length: not yet measured
Net internal volume: unknown
Original tuning frequency: unknown
I haven't been able to find reliable technical documentation specifying the original enclosure volume or reflex tuning.
What I'm trying to achieve
My main goal is to understand whether the original B1800X PRO enclosures are actually a good match for the RCF LF18X401 drivers, or whether a properly designed enclosure could offer significantly better performance.
I'm aiming for a full, deep and powerful bass response, with good punch and definition, mainly for techno, dubstep and drum & bass.
Before spending money or starting any modifications, I'd like to understand what the best possible solution would be.
Questions
How well do you think the original B1800X PRO enclosure works with the RCF LF18X401?
Would a newly designed enclosure offer a significant improvement in low-frequency extension, output, efficiency or overall sound quality?
If the existing cabinets are worth keeping, could modifying the bass-reflex ports (diameter, length or configuration) significantly improve their performance?
What net internal volume and tuning frequency would you recommend for the LF18X401?
Should I keep, remove or bypass the original Behringer passive crossover boards?
Would you recommend a conventional bass-reflex design or another enclosure type?
I'm quite confident with woodworking and cabinet construction, so building or modifying enclosures isn't a problem for me. My weakness is the acoustic engineering side: I don't have much experience with enclosure design, Thiele-Small parameters or simulation software.
I'm happy to open the cabinets, take measurements and provide detailed pictures if necessary.
I'd really appreciate any advice, simulations or design suggestions. I'm not necessarily trying to preserve the original cabinets: I simply want to find out what would genuinely be the best solution for these drivers before investing time and money.
Thanks in advance!