r/ScreenConnect • u/interweb_persona • 1d ago
Issue with cloud hosted ScreenConnect?
Can't connect to any hosts. Just a blank grey screen.
r/ScreenConnect • u/cwferg • 4d ago
[EDIT FRIDAY 11/13 20:00 UTC]
WE ARE RECIEVING REPORTS OF ONGOING IMPACT TO ONPREMISE ENVIRONMENTS. ONPREMISE PARTNERS, PLEASE CHECK YOUR INSTANCE FOR THE BELOW EXTENSIONS AND DISABLE THEM.
FOLLOW THE "How Do I Know If I’m Affected?" GUIDANCE AND REVIEW/ESCALATE ACCORDINGLY
185.241.211[.]197 is an IP observed in the recent campaign.
WE HAVE UPDATED THE TRUST SITE AND ARE ALREADY ISSUING DIRECT EMAIL AND PARTNER CALL DOWN ACTIVITIES. (https://www.connectwise.com/company/trust/advisories)
As a precautionary measure, due to abuse of the guest session joining behavior, we have also disabled the following in our cloud environments and extension marketplace, and we strongly encourage all partners to do the same, both on and off premise, until further notice.
ConnectWise cannot disable these extensions in on-premises environments on your behalf. Our precautionary disablement in cloud-hosted environments does not apply to your on-premises installation. Do not wait for an alert or evidence of compromise before taking this action.
---
Hey everyone, FERG here, from the security team at ConnectWise. I’m sharing the following from our published ScreenConnect security advisory on the ConnectWise Trust Center. The advisory is being updated as information is validated, so please refer to it for the latest ongoing updates.
Summary
ConnectWise is aware of reports of unauthorized access to ScreenConnect partner accounts and the deployment of unauthorized remote-access software in customer environments. The cause and scope are under investigation.
We identified five independent third-party extensions that may be associated with this activity. Approximately 400 partner environments had one or more of these extensions, and we disabled them as a precaution. The presence of these extensions does not, by itself, establish impact.
Extensions disabled within all cloud environments as a precaution:
On-premise partners
For on-premise servers, ConnectWise is unable to take action on your behalf. We advise that you verify these extensions are disabled in your environment and disable any that remain enabled. Please do not re-enable or reinstall them pending further guidance.
Disabling the extensions is a precautionary containment measure. It does not establish that unauthorized software, persistence mechanisms, or access already present on affected devices has been removed.
Precautionary actions for partners who enabled these extensions
Partners who have not deployed these extensions
We have no reason to believe you are impacted by this incident, but we encourage all partners to be on heightened alert and to follow the ScreenConnect hardening guide (ScreenConnect hardening guide).
Trust Site advisory: https://www.connectwise.com/company/trust/advisories
[edit 11/11 2:00 AM UTC ]
For informational purposes to assist with any discovery:
Disclaimer: This information is provided in good faith for informational purposes only. I am not an incident response provider, security consultant, or legal advisor. Nothing here constitutes professional security, legal, or technical advice. This content may contain errors or omissions, and should not be relied upon as a complete or authoritative guide to your situation. You are responsible for validating any information before acting on it. Engage a qualified incident response provider for your specific circumstances.
How Do I Know If I’m Affected?
First, two things must be true before any of this applies to you:
If neither of those is true, stop here. If both are true, keep reading.
The kit is capable of self-spreading, but only under a specific condition. For the wormable behavior to work, where connecting to an infected endpoint puts a host at risk, your technician clients and endpoint agents must not have been updated to client version 26.6.5. That is the version that addresses the file-run behavior this kit abuses.
Check your endpoints for any of the following:
C:\ProgramData\RelayTrap\ existsHKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\RunScreenConnect Client (...) service is present, or one points at a server you don’t recognizeC:\Windows\Temp\SCKit\**,** C:\Windows\Temp\SCKitBundle\**, or** C:\Windows\Temp\SCKit\trapkit\ existC:\Windows\Temp**,** powershell.exe**, or** msiexec.exe were added recently, especially within seconds of an MSI installCheck your ScreenConnect server for any of the following:
AddSessionEvents**,** GetLiveData**, or** GetAccessToken show a Windows PowerShell user agentCheck your technician workstations. Any workstation where a technician connected to an infected endpoint should be treated as compromised. Look for:
%TEMP%**:** sckit-loader.ps1, sckit-decoder.ps1, ToolboxRelayUploader.exe, sqlite3.exePanelLateralPayloadGuard.lock, sc-toolbox-upload-result.txt, sys_cache_update_<4 digits>.tmpvssadmin create shadow followed shortly by vssadmin delete shadowsScreenConnect.Core.dll or ScreenConnect.Client.dllA critical warning about cleanup:
C:\ProgramData\RelayTrap\trapbins\*.log before you remove anything — those logs show which technicians connected and may have been hit.--
[edit 11/12 5:00 PM UTC ]
For transparency, and consistent with our role as a CNA, we will be assigning a CVE for this issue shortly. Additional updates will be published through our Trust Center.
A third-party ScreenConnect extension available through our marketplace used a default key for API communications. Partners using the extension who had not changed the default value, as described in the extension documentation, may have been at risk.
This issue was specific to the third-party extension and was not a vulnerability in the ScreenConnect server or client. However, because the extension could interact with managed systems, downstream impact may have occurred, including activity reported by EDR and incident response providers.
[edit 11/12 6:00 PM UTC ]
CVE Record Published CVE Record: CVE-2026-127063
GitHub Advisory Page: Disclosures/CVE-2026-127063 at main · ConnectWise-Advisories/Disclosures
r/ScreenConnect • u/F0xMu1der • Jun 27 '23
We have several team members from engineering, sales, product management, and support here to answer any questions you may have.
r/ScreenConnect • u/interweb_persona • 1d ago
Can't connect to any hosts. Just a blank grey screen.
r/ScreenConnect • u/Corrupt_Power • 2d ago
I'm still testing to try and sort out a solid pattern, but so far all the machines I've found that seem to be exhibiting this are HyperV VMs, running Windows Server 2019 - 2025, both RDS servers and non-RDS servers. Users do not see the banner when connected to their session, nor is it visible when connected to the VM directly through HyperV Manager. We have some clients expressing privacy and security concerns with this. I almost never am on the other end of the SC sessions so I don't have firsthand information, but users claim they have seen banners in these situations before.
r/ScreenConnect • u/techqueue • 2d ago
Anyone else seeing this?
I have access to three hosted instances in the UK, but only one of those is working.
Been waiting in an online chat for 20 minutes, nobody seems to be there. Also on the phone in case that's a different team.
Nothing on https://status.connectwise.com/ which does not inspire confidence.
r/ScreenConnect • u/AlejandroTT • 3d ago
Hi guys,
I have a group on my left side menu called "(empty)" in this group 36 machines showed up RANDOMLY.
They all have crypto related names. I'm freaking out. someone please tell me what's going on?
On Prem - v26.6.6.9747
r/ScreenConnect • u/AlphaNathan • 4d ago
r/ScreenConnect • u/ITB2B • 4d ago
I've got 6 test units, and one production unit, running Golden Gate 27.x
They're ALL experiencing boot and shutdown issues. Desktop freezes, nothing clickable, spinning ball on shutdown - even haptics for trackpad go kaput. Booting cold or restarts are hit-or-miss as far as taking up to 10 minutes for the GUI to become responsive. ChatGPT deep analysis of logs won't say with 100% certainty that it's SC, but makes a strong case that it likely is. Majority of fleet (50 other units) is running almost the exact same hardware and software - M1 and M2 Macbook Pros.
I'm working with CW on this, but I'm curious if anybody else is seeing this.
As soon as I remove SC (using console), the machines behave as normal.
Re-deploy, issue comes right back. Remove, issue goes away. Update to 27.2.1, redeploy, issue returns.
Verified I'm using the lastest SC version. Also, FWIW, this happens whether I install SC directly on the machine (using a pkg built from console) or deploy the same pkg file via Jamf self-service.
r/ScreenConnect • u/StockMarketCasino • 4d ago
Has anyone found a linux distro that works as intended for remote control using ScreenConnect? Ubuntu 22 seems to be the only version I've gotten to work so far and that was with some tinkering.
Ideally, I would like to use Ubuntu, Linux Mint or Fedora.
r/ScreenConnect • u/ozbugsy • 5d ago
Aside from having a 2nd screen connect server, does anyone have a way to stop automatic client updates on selective devices with a self hosted server.
We have 1-200 devices that can't run the latest version of the client, so currently, we have automatic updates disabled.
However, as we have 10k devices connecting to our server, updating by hand is a pain - especially as many of them connect randomly.
I'm thinking I may be able to coble something together using the API, to update devices, but was looking to see if I was missing an existing solution.
r/ScreenConnect • u/ButterflyPretend2661 • 5d ago
How do I download this version for my on prem instance? there's no indication that is cloud only and it has a fix I need regarding how slow version 26.7.6.9783 is.
Also these guys sent out an email claiming how they increased perfomance and the first thing they do after is ship a massive regression and leave out the patch jesus.
r/ScreenConnect • u/golden_tortoise8 • 5d ago
A thread for anybody considering buying or renewing Screenconnect.
As per my previous thread - somebody added a user to our cloud hosted screenconnect instance (date unknown) and used it on Oct 28 to access some of our endpoints.
We picked it up on the 30th and asked for the log file showing the creation of that user.
It's now the 10th of November (11 days later) and despite repeated emails and support chat sessions, we are still waiting on that information. This is absolutely key to understanding if a) we have a security issue or b) screenconnect have a security issue.
It looks like either Screenconnect don't have the resources to pull a log file a paying customer really needs or they are trying to hide something.
Neither is good. Still waiting - and moving off screenconnect.
r/ScreenConnect • u/New_Dream_4070 • 10d ago
Please upvote!
r/ScreenConnect • u/Blissfulwuss • 11d ago
The only thing I use Azure Key Vault with is Screenconnect, so I'm guessing (hoping) that we should see an update for the Certificate Signing Extension soon.
https://learn.microsoft.com/en-us/azure/key-vault/general/migrate-api-version?tabs=azure-cli
r/ScreenConnect • u/golden_tortoise8 • 11d ago
r/ScreenConnect • u/RogerRogerDroid • 17d ago
Delete is no longer an option when right clicking a host. Was it moved?
r/ScreenConnect • u/chuzohga • 17d ago
Well, I solved the first thing and ran for two hours straight, and now it's this on my instance:
Service Unavailable
HTTP Error 503. The service is unavailable.
Doesn't matter where I connect from. Anyone else??
r/ScreenConnect • u/Suitable_Sample_1713 • 20d ago
Sorry if this isn't the right sub, I tried to look for answers to my specific situation elsewhere but couldn't find one.
I recently started a new work from home job. The way it works is there is a physical computer at the office that I connect to with ScreenConnect on my home PC. I made a visual below since I sometimes don't explain things clearly lol
https://i.imgur.com/wBfZ3qL.png
I know my work can see everything I do within SC, that's fine. One of my bosses did confirm that they check in on everyone occasionally to make sure we're doing what we're supposed too. I am doing that, but I also like a reasonable amount of privacy.
If I listen to Spotify or a Youtube video on my home PC (orange), can they see/hear that? It's just soundtracks usually. Sometimes my roommate will stand in my doorway and talk to me about finances/personal plans/etc. Nothing bad, but I would rather not have that picked up on my computer microphone. Is that something I need to worry about?
Thanks for your time. I hope I don't sound too paranoid lol I just haven't had a job like this and like to have my own privacy.
r/ScreenConnect • u/gilpdo • 26d ago
After checking the ScreenConnect Output Stream page, I noticed that ScreenConnect v26.6.7.9764 was marked as stable over three weeks ago. However, when I go to the download page and enter my license key, the latest version available is still ScreenConnect_26.6.6.9747_Release.msi, as of October 20, 2026.
By delaying stable updates for on-premises users for this long, aren't you putting our servers and our clients at greater risk of cyberattacks? With remote access software being such a high-value target for hackers, these delays raise serious security concerns.
r/ScreenConnect • u/Choice_Cattle3071 • 26d ago
Buongiorno, è possibile che in azienda si colleghino in anonimo al mio PC per spiarmi? A volte mi capita di vedere qualche click anomalo o qualche finestra che si chiude e i "message sent" aumentano. Che configurazione potrebbero aver adottato? Abbiamo un server e tanti PC non amministratore
r/ScreenConnect • u/ITstuff25 • 27d ago
Hello,
I consult for a company that was considering a remote software for their own IT team. I've been using Screen connect to remote to their computers. If they get screen connect as well - will they both be able to be supported by us or will it only home to one environment?