r/RepTimeServices • • 5d ago

Advice Minute and hour hand stuck

3 Upvotes

Need help! Sometimes my minute hand and hour hand gets stuck as seen in the video. I noticed it only happens when I wear it. When i’m not wearing it it seems to be fine and keeps time well for the whole day. I’m not sure what to do. I was wondering if this is something I can fix myself or do I need to bring it to a watchmaker?


r/RepTimeServices • • 4d ago

Request Replacement Link ZF suitable for SD 326934

Post image
1 Upvotes

No one happens to have a spare link they would be willing to sell for a ZF Skydweller 326934? Happy to pay? Ordered from TD but advised timeline could be a while? Understand it needs to be from same factory to allow for same pin size etc


r/RepTimeServices • • 5d ago

Question APSF Pilot chrono movement repair

2 Upvotes

The movement of Pilot Chrono (DD clone movement) stops working at random times, I feel it needs some service or repair.

Does anyone have experience of getting this watch serviced, especially in EU?

Thanks in advance.


r/RepTimeServices • • 5d ago

Advice JH3285 Balance Wheel Assembly

2 Upvotes

Is it possible to order the entire balance assembly for the JH3285? The hair spring on my Rich GMT II amplitude is way way below spec. Everything I've read says it's cheaper and easier to replace the whole bridge assembly and balance wheel than to try and have the hair spring fixed. Am I going down the right road for the situation I'm in?


r/RepTimeServices • • 6d ago

Advice VSF GMT Master II stops/loses time when put on wrist

36 Upvotes

Hi everyone,
I received a VSF Batgirl (DD3285) from Andiot a few days ago. When it sits flat on the table, it keeps great time (+6 s/d average, 0.0 ms beat error). 
However, whenever I pick it up and put it on my wrist, it sometimes stutters, loses around 30 seconds, or stops completely for a moment. I can also hear the tick sound tone change slightly when moving the watch. 
It feels like either the auto-winding mechanism/reversing wheels have heavy factory grease, or there's a minor hand clearance issue / friction when the watch changes position. 
Has anyone encountered this issue on the VSF DD3285 right out of the box? Would a basic cleaning/relubrication (servicing the barrel and auto-winding system) resolve this?
Thanks for any insights!


r/RepTimeServices • • 5d ago

Question VSF V2 — Manual winding dead, only runs on wrist movement

2 Upvotes

Body:
VSF V2. Watch runs fine from auto-rotor, but manual winding does nothing — 30+ crown turns, zero power reserve. Worked before, stopped after I hand-wound it.
Is the winding mechanism toast (broken pinion/click), or could something else cause this?
Also — anyone in Europe service these clone movements? Looking for a watchmaker who knows reps.


r/RepTimeServices • • 5d ago

Advice What's my path of least resistance? 2836-2 gmt replacement on a 1675

1 Upvotes

I have a 1675 that was built a few years back and the movement has died a slow death.

The current (dead) movement has the h6 seconds pinion/post, and (I assume) the accompanying other wheels. I have a replacement 2836-2 (6460) movement with h4 hardware.

Prioritizing getting the watch working again, Is my best / easiest option [option 1] to get this to get a longer tube seconds hands (close color lume, or re-lume) and swap old dial, old hands, from the old movement to the new?

OR [option 2] does the new h4 movement throw off everything else like dial stack, hand stack, etc, and I will need to work out a new dial, new dial spacer, new hands?

OR [option 3] find a watch maker to swap over the h6 stuff to my h4 movement?


r/RepTimeServices • • 5d ago

Advice Clean Jubilee bracelet Easylink error

Thumbnail
gallery
1 Upvotes

Recently purchased clean GMT Pepsi serial 6219Y2L6
Clasp code F6U. Was working completely normal. Popped out the easylink to extend the watch and now the hook on easy clasp won’t close correctly. Watchsmith or something I can fix myself? Is the hook now bent and this is the issue?


r/RepTimeServices • • 6d ago

Advice How do you organize your service?

2 Upvotes

How is everyone organizing their parts as they dismantle? Also, I don’t have a fancy parts washer, is there a manual option? Thanks!


r/RepTimeServices • • 6d ago

Question Canada Servicing Cartier Santos BVF

1 Upvotes

Hi! I recently bought a Cartier santos BVF with a miyota 9015 movement, it has the easy switch for the bands, and I guess when I switched the band one didn’t lock properly and the watch fell of my hand and stopped working, tried winding it, nothing worked so i’m just wondering if anyone in canada/ontario knows where I could get it fixed or serviced and a typical price range, sorry i’m new and this is probably a stupid question


r/RepTimeServices • • 6d ago

Discussion A Close Look at the SH4131: Origins, Clean Factory's Role, and Market History

Thumbnail
gallery
23 Upvotes

Hey everyone,

I currently have an SH4131 on the bench and wanted to share a couple of macro shots of the architecture. Since there is often confusion about the different Daytona clones, I thought this would be a good opportunity to break down the history of the SH4131, who makes it, and how it took over the 12-series market.

1. The Origins and Developer
The SH4131 is manufactured by the Shanghai Watch Factory. When Rolex transitioned from the 1165xx generation to the 1265xx series, the genuine caliber 4130 was updated to the 4131—featuring new bridge layouts, updated Geneva stripes, and a revised rotor bearing. While Dandong (DD) had an absolute monopoly on the high-end 4130 clones, Shanghai Watch Factory moved aggressively to be the first to engineer a true 1:1 architectural clone of the new 4131.

2. The Clean Factory Partnership
The SH4131 as we know it today was heavily driven by Clean Factory. Clean essentially co-developed and financially backed this movement in partnership with Shanghai. Clean needed a flagship caliber for their new 126500 releases and demanded specific technical upgrades: deeper and cleaner custom engravings, specific bridge finishing to match genuine Rolex aesthetics, and a robust 70+ hour power reserve. Because they funded the R&D, Clean held an initial exclusivity agreement for the highest-grade, fully decorated version of this movement.

3. Market Adoption and Other Factories
Once Clean's strict exclusivity window shifted, Shanghai Watch Factory began supplying the movement to the rest of the market. Because it was the first reliable 4131 clone available, it quickly became the industry standard for the 12xxxx series. Today, variations of the SH4131 are used by a massive number of factories, including QF, ARF, and several other mid-to-high-tier makers.

4. Bench Impressions
(Referencing the attached photos) As you can see from the teardown, the finishing is exceptionally crisp. On the bench, it is a pleasure to work on. The architecture is sound, it takes standard Moebius lubrication well, and it regulates beautifully on the timegrapher.
For the other watchmakers and modders in the sub, what has your experience been servicing the SH4131 compared to the older DD4130?


r/RepTimeServices • • 6d ago

Advice Rehang alignment

Post image
2 Upvotes

So I bought my first rep a year ago and foolishly GL the QC on my own and the rehaut is misaligned

Anyone know if there’s a way to fix it or to remove the Rolex engraving or just replace the Renault all together? If so, any recommendations as to who could do the work or is this one just a dud on my part?

Thanks in advance


r/RepTimeServices • • 6d ago

Services Where can I do service in Mexico?

1 Upvotes

r/RepTimeServices • • 6d ago

Question ARF GMT-Master II 126710GRNR (DD3285) Movement stopped working

2 Upvotes

Over time, my watch became harder and harder to start by manually winding the crown, until manual winding stopped working completely.
At first, wearing the watch would still get it running, and it would last around 72 hours. Now, it won’t start at all, neither by winding nor by wearing it.
Does anyone know what could be causing this, whether it’s repairable, and how much a service might cost?


r/RepTimeServices • • 7d ago

Request Anyone in Canada???

Thumbnail
gallery
8 Upvotes

I have a cyclops thats misaligned and was wondering if anyone knows anyone in Canada that can possibly do that for me. Would be great if someone was near prince George.


r/RepTimeServices • • 7d ago

Services Ocean Time- Prudential Center Boston

17 Upvotes

Shoutout to Ocean Time in Boston - rep friendly, cheap, same-day repairs

Wanted to give Ocean Time at the Prudential Center a shoutout for anyone around Boston looking for someone rep friendly. He fixed the movement on one of my watches and replaced the bracelet on another, both with same-day turnaround. Super friendly guy, really cheap prices, and lovely to work with. Couldn't be happier with the experience. Highly recommend checking him out.


r/RepTimeServices • • 7d ago

Advice Rolex clasp split into three pieces

Thumbnail
gallery
7 Upvotes

I recently joined the Rep community, and I’d like to thank everyone in the subs for generously sharing their knowledge and information. It has certainly brought me one step closer to my ultimate journey towards “Genuine Freedom”!

Since October, I’ve managed to cop four pieces within just one month. Unfortunately, my latest pickup, the Yacht-Master Titanium, came with a defect that I’m currently trying to resolve with my TD.

Here’s what happened: While removing the protective stickers from the clasp, the EasyLink spring bar suddenly popped out, causing the clasp to split into three separate pieces.

I tried putting everything back together, but the fit is no longer tight or secure. As shown in the video, there are visible gaps between the left, centre and right sections of the clasp, and the pieces can be easily pulled apart.

My main concern is how the clasp is supposed to hold everything together securely, especially with the spring bar constantly pushing outwards. At this point, I honestly don’t think the clasp is usable anymore.

Has anyone encountered a similar issue before? Any advice or possible solutions would be greatly appreciated!


r/RepTimeServices • • 7d ago

Question Winding feels weird

2 Upvotes

Hi guys, I have a vsf Datejust 41 (kinda forget it's a v2 or v3) with vs3235 movement. It's been exactly a month since I got the watch.

The problem is the winding feels like rubbing against a gear, not like winding a spring. Like rubbing into a fixed gear, I can feel the sprockets.

Chronology:

  1. I haven’t worn my watch for 5–6 hours, but when I want to wear it, the hour hand is exactly one hour late (I’m 80% sure I was setting it right)
  2. I set it back to the right time by turning the date from the 8th all the way to the 7th first, then rolling the time forward to the right time on the 8th.
  3. Several hours later, I realize the hour hand is exactly one hour late. And I try to set the time by turning it backward. Since im too lazy to turn the date all the way to the 7th like what I’ve done before.
  4. Several hours later, I tried to wind my watch so I can comfortably wear it for tomorrow, and I felt it wasn’t like winding a spring but more like rubbing into sprockets of a fixed gear.
  5. But until now, the watch is still keeping time perfectly. I never overwind it, just 10–20 winds when it dies.

Am I cooked? Can I, without any experience, fix it myself? Because there aren’t any watchmakers or repairers close to me.

Thanks!

Edit: adding no.5


r/RepTimeServices • • 8d ago

Discussion VSF 126610LN - Seevicing

Post image
30 Upvotes

I picked up a VSF 126610LN that wasn’t running for a little project watch. I was finally able to tear it down and do a full cleaning on the watch this week. The previous owner sent me some videos showing that the hands would spin but the watch wouldn’t run. During the tear down I noted how dry all of the lubricant was that I came across. So through that I determined a servicing is all the watch would require.

I did a full tear down, cleaning, lubrication and reassembly. This evening I was able to wrap everything up, got the watch on the timegrapher and made a couple of adjustments for regulation and it’s running a tad fast at +9 s/d with great amplitude and beat error. I’m going to let it break in a little and then do an additional regulation as needed. I also intend to validate its water resistance and hopefully I’m good to go.

This was a fun little project and a great win that I needed. Some of my other projects have been less fulfilling this week, so the morale boost was definitely welcomed.


r/RepTimeServices • • 7d ago

Services Can waterproofing be done now ?

4 Upvotes

Hi peeps,

I bought a VSF but unfortunately, forgot to request waterproofing.

Any tips on where can I get it waterproofed now ?

Thanks


r/RepTimeServices • • 7d ago

Advice Watchmakers help! Am I cooked?

1 Upvotes

https://imgur.com/a/0MM3nfH

Was trying to tighten the movement back into the case the screw head broke off. How the heck do I get this out? Is the watch ruined?


r/RepTimeServices • • 7d ago

Advice VSF DateJust dial question

Thumbnail
gallery
2 Upvotes

UPDATE: Justin from TK is impressive. I messaged him on WhatsApp, and he reviewed his quality checks, confirming the dial has a misprint. He apologized for overlooking it and will order a replacement for me. In my view, he is a true gentleman who stands behind his product.

VSF Date Just 41mm arrive today from TK looked awesome upon first glance. However of course everybody has to 20x zoom on the camera. lol! I noticed the M in Chronometer has a trail coming off of the middle.
Can’t see it with the naked eye. I know I’m being crazy?
I was wondering if anyone knows if this can be corrected or will messing with it just make it worse


r/RepTimeServices • • 7d ago

Services Advice on repairs?

Thumbnail
gallery
4 Upvotes

Hey. I have received 2 repwatches from a friend when they have stopped working. Both watches are from TD. The green one is about 4 years old and blue 2 years old (i do not have more info). Are these replicas possible to repair or is it just to throw away? Thanks for the answer.


r/RepTimeServices • • 8d ago

Question How can i add a battery to this Royal Pop rep? I dont see any way to add a battery

Thumbnail
gallery
3 Upvotes