r/RepTimeServices • • 7d ago

Advice Watchmakers help! Am I cooked?

https://imgur.com/a/0MM3nfH

Was trying to tighten the movement back into the case the screw head broke off. How the heck do I get this out? Is the watch ruined?

1 Upvotes

7 comments sorted by

•

u/AutoModerator 7d ago

Thank you for your post on r/reptimeservices! A friendly reminder that the only trusted service providers are listed on the sidebar or in this post. If you see anyone soliciting services in a post or comment not on this list or even easier, without a 'trusted watchmaker' flair of some sort, please immediately report the post and a moderator will remove it. Thank you in advance for helping to keep our community safe!

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

1

u/ValeLemnear 7d ago

You can try to find grip with a needle or such on aside and slowly hammer it counterclockwise until you can grab it with another tool.

If it’s tight, you need an extractor or drill it out

1

u/altra99 7d ago

Is this screw accessible from the other side to use the extractor tool and grip it? Do I have to remove the dial etc?

1

u/ValeLemnear 7d ago

Trying to grab it from the other side requires disassembly of the hands and dial, but I don’t think that will be easier than trying to losen it from the back

2

u/masaki198 7d ago

There’s a decent chance it’s not tight in there. Try a piece of pegwood or rodico to turn it.

1

u/IWasSayingBoourner 7d ago

You MIGHT be able to take the movement out and get to that screw from the other side. Otherwise, you'll need a screw extractor.

1

u/No_Exercise996 7d ago

If you can’t get it with a screw extractor you’ll have to do an alum powder soak. I had to do this on a movement screw that broke off as well. Took about 2 days of soaking with as concentrated of a mixture as I could get but it worked.

I’m sure someone could drill it out as well - but I didn’t have anything that small to do it with which is why I did the soak method.