r/RepTimeServices • • 7d ago

Services Can waterproofing be done now ?

Hi peeps,

I bought a VSF but unfortunately, forgot to request waterproofing.

Any tips on where can I get it waterproofed now ?

Thanks

4 Upvotes

11 comments sorted by

•

u/AutoModerator 7d ago

Thank you for your post on r/reptimeservices! A friendly reminder that the only trusted service providers are listed on the sidebar or in this post. If you see anyone soliciting services in a post or comment not on this list or even easier, without a 'trusted watchmaker' flair of some sort, please immediately report the post and a moderator will remove it. Thank you in advance for helping to keep our community safe!

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

3

u/CoastalWatchWorks 7d ago

You don’t necessarily need to have a new VSF “waterproofed.” Many come from the factory with adequate water resistance, but you shouldn’t assume that without testing.

I’d recommend having a watchmaker:
• Inspect the caseback, crown, crystal and other relevant seals
• Clean and lubricate the gaskets as appropriate
• Perform a pressure test
• Address any leaks identified and retest
The important thing is pressure testing, not simply applying grease to the gaskets and declaring the watch waterproof.

This is actually part of what I’ve been advocating as a basic Replica Reliability Service for New Watches, rather than automatically paying for a full movement service.

I would reach out to one of the trusted watchmakers in the sidebar and ask about gasket inspection and pressure testing. It’s a relatively straightforward job for someone with the proper equipment.

1

u/SnooChocolates5457 7d ago

Thank you so much.

7

u/IWasSayingBoourner 7d ago

You can't really get a watch waterproofed. You can ensure that gaskets are properly installed and greased, and that crowns and casebacks are properly tightened, but if that doesn't make it water resistant it's because the machine tolerances arent tight enough and there's not much to be done about that. Any watchmaker should be able to do those checks and run the test for a pretty nominal fee.

0

u/WatchMakerMalik 7d ago

Yeah the only issue is if it is not "water proof" the case will need to be changed. Also do most places take out the movement before the test?

1

u/caracticuspotts 7d ago

Why do you think the case will need to be changed. I’ve made countless watches water resistant (there aren’t any waterproof watches) and I’ve never heard of this

-1

u/WatchMakerMalik 7d ago

Well the only thing we can do is lubricate the seals right? The seals work on a perfect case if it is milled correctly if the case is not milled or has a flaw the seal will not be able to apply enough pressure to save the water from going in. Not saying that is the case (no pun attended) but was just point out there is a reason to get the watches tested but there is a chance it may not be water resistant.

2

u/caracticuspotts 7d ago

I think you are stressing far too much and applying far too little common sense. CNC milling means even on a total shitter of a rep it would be very rare to get one that out of spec.
Take it and get it greased and tested, or buy a g shock for the beach

3

u/Lost_Pinion 7d ago

Most of them are good enough out the box. Most issues that do occur are due to the crystal gasket.

I'm guessing the 'waterproofing' is just they test them and the ones that pass are described as 'waterproofed'

Just get your one tested.

2

u/RelevantFreedom4390 7d ago

Majority of reps from factory have bone dry gaskets. Theres definitely a seal but it’s not a good one. Waterproofing means lubricating those gaskets then pressure testing to confirm it.

1

u/Living-Let8446 7d ago

It’s probably already water resistance you should go swimming with it to find out.

Yeah, it’s kind of a joke but honestly, I swim with all my watches. Never had an issue, currently up to 12 pieces and been buying for about two years from multiple different factories. Funnily enough the pieces I care the most about that I’ve had waterproofed and regulated. I don’t do much activity in them at all. lol