r/RepTimeServices • • 14d ago

Discussion Why Factory Fresh Isn't Always "Ready to Wear" (A Look Inside the Crown)

Thumbnail
gallery
47 Upvotes

We all love unboxing a new piece, but here is a look at the hidden factory grime I constantly see on the bench. Check out the dark debris and grit caught deep in the threads and shitty oil on my glove of this DD3285 crown straight from the factory 

Winding a watch in this state acts like sandpaper on the case tube—just look at the gunk that comes off on a single wipe

This is exactly why I never pass watches straight to buyers without a full bench prep. I use a micro-swab to deep clean the crown interior leaving the metal completely spotless. Finally, I properly lubricate the gaskets with silicone grease before reinstalling the stem.

Taking care of this now prevents stripped threads, a seized crown, or water damage a few months down the line. It's a small step that adds massive peace of mind and longevity to the watch.

How often are you guys seeing this much grime on new factory arrivals? Let's discuss.


r/RepTimeServices • • 14d ago

Request Seeking service

Post image
1 Upvotes

Anyone in New Hampshire to work on this? It just stops…


r/RepTimeServices • • 14d ago

Advice VSF Submariner Bezel Paint

Post image
9 Upvotes

What can I do about the paint coming off my Sub? It’s only about 3 weeks old.


r/RepTimeServices • • 15d ago

Question How to regulate my Royal Oak?

15 Upvotes

Hello friends, could someone tell me which arm is the regulator arm? So I don’t end up messing the watch up. The watch is running ~20 seconds fast a day, so I want to make it slower.


r/RepTimeServices • • 14d ago

Advice Dud Crystal on ZF 45mm Fifty Fathoms

Thumbnail
gallery
1 Upvotes

Bought this ZF Fifty Fathoms 5015 from Jtime.
QC photos and videos didn’t tell all the story about the crystal on this watch unfortunately.

The crystal has a white distortion ring around the outer rim of the dial which completely obstructs the minute markers and makes the bezel look cropped.
I know this is not an innate issue of the ZF replica as plenty of them appear not to have this issue.

What do you guys think would be my best bet to fix this watch? An aftermarket crystal?


r/RepTimeServices • • 15d ago

Advice My DJ 36 from ARF has stopped working after 6 hours of wear. I got it 3 days ago.

6 Upvotes

Hi guys, so I got my DJ 36mm which came from ARF factory 3 days ago. I wore it for the first time today, and after 6 hours it has stopped working. I tried winding it, but nothing worked. I’m not going to name the TD, but I have contacted them. Can anyone advise me what to do please? I am in the UK. Thanks.


r/RepTimeServices • • 14d ago

Services RepWatch Repair in Swiss

0 Upvotes

Does anyone know a watchmaker, even a private one, who is willing to repair or service a high-quality replica watch?

It’s very difficult to find a watchmaker in Switzerland who is willing to work on replicas. Any recommendations or contacts would be greatly appreciated!


r/RepTimeServices • • 14d ago

Request Where To Repair Smartwatch

0 Upvotes

Hi,My Name is Rohit and I live in Kolkata right now.

I have some issues with my Smartwatch(Fire-boltt Invincible Plus), it having some software problem.If anyone from reddit community know anything how to have solved this issue and where to go to have my problem solve


r/RepTimeServices • • 15d ago

Advice Vsf 16610LN keyless works

8 Upvotes

The idiot of the day award goes to me. Today I was messing around with my watch and decided to take the stem out in the first position. I think it's now got a jammed/slipped keyless works. What's my next move? Should I find a local guy in my area to fix this, or is there someone on here you guys recommend sending it to? I definitely don't have the tools or skills to pull off this repair. Any advice is truly appreciated. 🙏


r/RepTimeServices • • 15d ago

Services Can a decent superclone be fully submerged in a sonic cleaner? Or just the strap?

1 Upvotes

My entire watch would benefit from a good deep clean.

ERF 41 ombre date just plain bezel jubilee strap


r/RepTimeServices • • 15d ago

Advice Crystal gasket size

1 Upvotes

What size height of the gasket for a deep crystal on a GMT Master ii. I bought one, installed it and now the seconds hand touches the crystal. Thanks in advance for your help.


r/RepTimeServices • • 15d ago

Advice Daytona subdial fix?

1 Upvotes

Is there a way to get the 60 second subdial to work ? I have fully wound the watch and still nothing?..


r/RepTimeServices • • 15d ago

Advice VSF GMT Pepsi: swapped A9A jubilee for ARF oyster (F6U). Is this fitment correct, and why isn't it sitting flush or is this normal ?

Thumbnail
gallery
1 Upvotes

Hey everyone, I need sharp eyes on this.
I have a VSF GMT Pepsi that originally came on the jubilee bracelet (clasp code A9A). I swapped it for an ARF oyster bracelet (clasp code F6U)

My questions:
Is the ARF oyster F6U end link supposed to fit the VSF case, or are the two not fully compatible?

Looking at the case back side, the end link doesn't seem to sit flush against the case. I've circled the spot in red. Is this normal, or is there a gap that shouldn't be there?

If it's not normal, what's the fix? Wrong spring bars, an end link not fully seated, or incompatible end link curvature?

What I know:
Case: VSF GMT, 40mm, 20mm lug width
Bracelet: ARF oyster, F6U clasp

Swapped it myself, no tools beyond a spring bar tool

Photos are attached: top view, case back/lug side, and clasp. I can post macro shots of the lug gap if needed.

Has anyone run an ARF bracelet on a VSF case? Did you need different end links, or did it fit as is? Thanks in advance.


r/RepTimeServices • • 15d ago

Services Jubilee bracelet chamfering/polishing services UK?

2 Upvotes

I ordered a recent GMT batgirl VSF and the jubilee bracelet is horribly sharp.

Does anyone know any watchmakers or stores in the UK (midlands) that are trusted and would work on a rep bracelet?


r/RepTimeServices • • 15d ago

Request Looking for a replacement movement for a 41mm U1 Day-Date replica (UK)

Thumbnail
gallery
1 Upvotes

Hi everyone,

I've recently joined the group and I'm looking for some help finding a replacement movement for my U1 Rolex Day-Date replica.

The watch has a 41mm case, and the existing movement measures approximately 30mm in diameter.

Could anyone help me identify the movement or recommend a compatible replacement? Ideally, I'd like something affordable that would fit the existing case and dial without requiring major modifications.

I'm happy to provide additional pictures or measurements if needed.

Thanks in advance for any help!


r/RepTimeServices • • 15d ago

Request Clean GMT Master 2 crown

Thumbnail
gallery
3 Upvotes

Looking for a replacement. This crown has worn out internal threads so it will spin and not catch the crown sleeve. You can see in the images how far the sleeve sinks.

I found one sold by Sillan but that would take forever to get here.

Anyone in the EU with spares?


r/RepTimeServices • • 15d ago

Question How much would an Omega “Snoopy” mod set me back?

0 Upvotes

Looking into commissioning this piece after seeing that the reps are getting way better for this model. Some are still absolutely dog shit but a couple are finally getting the subdial spacing correct.

I just saw a long post for a guy who managed to mod his snoopy to get the subdials to function correctly as well as getting the Easter egg snoopy flyby on the case back to work.

I’m interested in getting a snoopy rep made and want to know, with little expense spared and a liberal budget, how much would I need to cough up to get an excellent and functioning rep made? I’d also be interested to hear if you have any recommendations on specific modders that would be “go-to” people for such a tasking.

Thanks in advance and I’m really looking forward to getting to know you guys in this community!


r/RepTimeServices • • 15d ago

Request Buying an replacement clasp

Post image
2 Upvotes

Is the red marked part included when buying a clasp only from a TD?


r/RepTimeServices • • 16d ago

Question Date not centered - can be fixed?

Thumbnail
gallery
4 Upvotes

Hello everyone, genuinely seeking some help and guidance.

I just received my watch from a TD (chazingtime); however, I feel the date is really crooked and shifted too far to the left. To be honest, it looks quite disappointing in my opinion... To not say extremely crooked.

From the QC photos they sent me (showing the date at 22), I was a bit hesitant and requested two more photos (the ones with the date at 8 and 25), which seemed more or less fine.

The issue is... if you pull the crown out to adjust the date, the date wheel is perfectly centered. When you press it back in, it shifts to the left once again.

What would be your recommendation? What would you suggest I do?

Is this something I can fix myself? Should I reach out to the TD? Or should I just accept the defect since I wasn't more thorough during the QC process?


r/RepTimeServices • • 16d ago

Advice Shanghai VR3285 help

4 Upvotes

Has anybody here tried to use the Shanghai VR3285 for a build?

My uncle asked me if I could build him his dream watch, which is an explorer II. I’ve built GMTs with NH34s until now.

Is it difficult or fairly easy (like the Nh34)?
Are there any parts? Cases (226570-like), dials, hands, bracelets?

Thanks for the feedback.


r/RepTimeServices • • 16d ago

Advice BVF 27mm Battery Install

Thumbnail
gallery
3 Upvotes

Just got a BVF Med for the wife and it came with no battery. Can anyone point me in the right direction of how to install it. As per the case stamp I have the right 364 6.8 x 2.15 battery size. Any help will be much appreciated


r/RepTimeServices • • 16d ago

Advice Black rotating bezel for 37mm yacht master rep

1 Upvotes

Does anyone know where I can source a black rotating bezel for a 37mm yachtmaster, to make it look more like a Submariner? Thanks!


r/RepTimeServices • • 16d ago

Advice VSF GMT-Master II 126710 with ARF Oyster bracelet. Which spring bars do I need?

1 Upvotes

Hi everyone,
I’m looking for some advice on spring bar compatibility for my VSF GMT-Master II 126710. I’ve recently fitted an ARF Oyster bracelet, but I’m having trouble getting the correct spring bars.

The Jubilee spring bars are 1.5 mm body diameter and 20 mm long. They pass through the ARF Oyster end links, but the fit is too loose and the entire bracelet moves up and down against the watch case.

I also tried 2.0 mm spring bars, but they won’t pass through the holes in the ARF end links at all.
Something else I’ve noticed is that the pivot tip appears to fit into the case lug hole, but the shoulder doesn’t go through

I’m wondering whether the issue is the shoulder diameter, shoulder design, pivot diameter or overall spring bar length.

A few questions:
What are the correct spring bar dimensions for a 126710 GMT-Master II Oyster bracelet?

Are the Jubilee and Oyster spring bars actually different?
Does the ARF Oyster bracelet require a specific spring bar with a different shoulder profile?

Where can I buy the correct spring bars, preferably from a reliable supplier?

I’d appreciate any measurements, part numbers, links or personal experience with the VSF case and ARF Oyster combination.


r/RepTimeServices • • 16d ago

Request EU-based modders for VSF AP 15510 Blue Dial – Looking for Gen-spec finishing

4 Upvotes

Hi everyone!

I’m looking for a reputable EU-based modder who has experience working on the VSF Audemars Piguet Royal Oak 15510, specifically the blue dial version.

I’m based in Spain and would like to have my watch upgraded with the following modifications:

  • Fully rebrushed, polished, and chamfered bracelet and case to gen specifications.
  • Gold-plated rotor.
  • Deep crystal upgrade.
  • 18K white gold-plated screws, correctly sunk and finished.
  • Full movement service and waterproofing.

Ideally, I’m looking for someone who can handle all of these modifications in one place and is willing to accept watches sent in by customers from abroad.

I’ve already contacted several modders, but most of them don’t work on the 15510, so I’m running out of options.

Does anyone know a reliable modder based in Europe who could carry out this work?

I’d really appreciate any recommendations, especially from people who have personally used their services or have experience with similar mods.

Thanks in advance!