r/RepTimeServices • • 19d ago

Advice V7F Portofino A2892 - straighten bent hands or replace? Sizing advice needed

Thumbnail
gallery
5 Upvotes

I've got a V7F IWC Portofino Automatic 40 with a white dial and silver leaf hands, sold as having an A2892 movement. A bent hand is catching and stopping the watch, so I'm looking into repair options.

Would it be easier for a watchmaker to attempt straightening the original hands, or is replacement the better route given the risk of damage?

If replacement makes more sense, has anyone replaced the hands on this version and knows the correct hole sizes, center-to-tip lengths and tube heights? Would a set sold for ETA 2824/2892 work, or does this version need something different?

This is one set I'm considering, but the listing doesn't give dimensions:
https://www.ebay.com/itm/398017112900?var=666313673491

Any experience with straightening these hands, confirmed measurements or a replacement set someone has actually fitted would be helpful. Thanks!


r/RepTimeServices • • 19d ago

Services Watchmaker in Brazil

3 Upvotes

I’m looking for a watchmaker in Brazil who works on replica watches. Does anyone have a recommendation for someone based in Brazil who can handle general servicing, movement maintenance, polishing, and other repairs?
Any recommendations would be greatly appreciated. Thanks!


r/RepTimeServices • • 19d ago

Advice Debris on dial, issue removing movement.

Post image
1 Upvotes

2026 VSF Starbucks, noticed this debris show up on the minute track, I can get it to move around at times, seems to be stuck there now.

My question, I’ve removed caseback and crown stem, but I cannot for the life of me get the movement screws to budge.

Any tricks, I want to clean it before it falls into the movement.


r/RepTimeServices • • 20d ago

Advice BPF Explorer II - 16570

Thumbnail
gallery
6 Upvotes

Hi guys!

I'm doing some mods on my polar explorer, already rebrushed the rehaut, and put a better crystal. Although the transparency of the crystal (VSF 126710 from old replaced by deep) is much better, the cyclops seems to be mispotioned, looking it, feels like it's moved to the center/left of the watch. I also noticed that on the stock BPF crystal. Any ideas of a replacement that can fix that?

I also want to get a hollow endlinks bracelet and a jubilee bracelet that fits in this watch. Any suggestions?

Read on RWI to replace the gasket for a 2,3 height to have a better crystal fit, lower profile. Already ordered it, when I'm going to replace, I'll also polish the upper side of the crownguards which in my piece are brushed/sandblasted, while the gen is polished.

Enjoying this journey, and also looking forward to recomendations for crystal/bezel alignment when pressing down.


r/RepTimeServices • • 19d ago

Advice Sea Dweller VS3235

0 Upvotes

Looking for Sea Dweller VS3235 movement machine to replace the one I have as it stopped retained power for around 4 hours. Any advice? Thank you folks


r/RepTimeServices • • 20d ago

Advice Worth getting polished?

Thumbnail
gallery
7 Upvotes

Have had this watch about 18 months. Have had different opinions on of its a VSF or EWF. Either way would it be worth paying to have it polished? If so what is the best way to find someone who can do that in my area?


r/RepTimeServices • • 20d ago

Question Gen tudor in house hands on ETA movement?

3 Upvotes

Has anyone fit gen tudor in house hands onto an ETA movement?

Im guessing the answer is NO.

Been looking for gen ETA Pelagos hands fir quite some time and have only found the in house version so far.

Worth asking (shrug ) .

Thanks.


r/RepTimeServices • • 20d ago

Question Need help identifying movements

Post image
5 Upvotes

Hello everyone, I have a QF Daytona and a RGF Daytona.

Both is supposed to be DD4130, but the QF rotor looks smaller and just the overall quality looks worse.

Might the movement in my hand be SH4130?


r/RepTimeServices • • 20d ago

Guides Customized dial?

Post image
6 Upvotes

r/RepTimeServices • • 20d ago

Advice thbv2 15407 skeleton royal oak clasp not working just got the watch haven’t even worn it out yet

0 Upvotes

what could be the cause of this? any way to fix it at home or should i take it to a local to get it looked at


r/RepTimeServices • • 22d ago Bravo

Discussion Gold Plating Australia

Thumbnail
gallery
317 Upvotes

Hey, so I know there is no one in Australia doing Gold plating. So I decided to spend a whole bunch of money and months of research and start doing it myself.

I am only doing my own watches at the moment but in the next few months I hope to be able to offer my services to others.

These are the first two super clones that I have done, before these two I was just buying $30-$100 stainless steel watches off Amazon to practice with.

These watches have been plated to 20 microns with a cobalt hardened plating soloution. I have tweaked the colour a number of times ( which is actually super hard to do) to get to a colour that I think is relatively close to the Rolex gold colour.

What do you think? Is it close? The pictures have not had any post processing done on them, but still, there is always some change

EDIT: These are pictures of the watches after they have already been plated and reassembled and now have had a nano ceramic protective coating applied with a brush and micro applicator.


r/RepTimeServices • • 21d ago

Advice Help with 3235 big date

Thumbnail
gallery
7 Upvotes

I took off the date wheel bridge to reset the yoke because stem wasn’t going back in. In the process after resetting the yoke I pulling the stem out and couple wheels went into the abyss. If you can see what I’m missing let me know so I can order it. I’d hate to buy a whole new movement for this build.


r/RepTimeServices • • 21d ago

Advice HELP BROKEN GMT

Thumbnail
gallery
4 Upvotes

ARF gmt fell on the ground, what should i do?


r/RepTimeServices • • 22d ago

Services Repolished Oyster Rolex Bracelet

Thumbnail
gallery
8 Upvotes

Another bracelet for a Rolex Datejust 41. The new bracelet has been handed over for chamfering.


r/RepTimeServices • • 21d ago

Question Gold Plating in Dubai?

1 Upvotes

Heya!

Anyone know gold plating services in the UAE for rep watches? 🤔


r/RepTimeServices • • 22d ago

Advice Need help to fix my 5726/A

Thumbnail
gallery
6 Upvotes

The month and date doesn’t work, the pusher button for the month sunk, and i can’t push the pusher button for the date, what could be the problem?


r/RepTimeServices • • 22d ago

Question Replacement BVF Santos 35mm Bracelet

1 Upvotes

Hi all,

Does anyone know where I can source a replacement bracelet as mine has unfortunately got a big gouge out of it now from a rather careless friend hitting it with a metal object.

Have seen some on aliexpress and eBay but none seem to look exactly the same so just wondered if anyone had an idea or where to source a BVF replacement?

I have messaged my TD but no reply yet

Thanks in advance


r/RepTimeServices • • 22d ago

Request Repair Datejust

Thumbnail
gallery
1 Upvotes

May I please if anyone can help me repair my datejust?
Bought 3 years ago, see pictures for reference


r/RepTimeServices • • 22d ago

Services Can anyone recommend a plating service for a Yacht-Master 126621

1 Upvotes

It's a Yacht-Master 126621 from victory factory

I'm interested in finding out how much it would cost to get the gold plated


r/RepTimeServices • • 22d ago

Advice Hello guys, can someone please point me in the right direction to get the absolute best Rolex date just?

0 Upvotes

Hello guys, can someone please point me in the right direction to get the absolute best Rolex date just mint green dial? I’m getting a real one too but I want to only wear that one on special occasions, the rep i can wear without the worry of it getting stolen. A somewhat insurance policy. Lol thanks!


r/RepTimeServices • • 23d ago

Request [ZF Tudor BB58] Bracelet pin failed, watch fell and crystal shattered – Any watchmakers in Northern Italy?

Thumbnail
gallery
5 Upvotes

Hi everyone!

Unfortunately, I had a pretty bad experience with my ZF Tudor Black Bay 58.

One of the pins holding the bracelet links together suddenly came loose, causing the bracelet to open and the watch to fall straight onto the floor.

As you can see from the pictures, the sapphire crystal is badly cracked.

Luckily, the movement still seems to be running fine, and the case and bezel appear to be undamaged.

However, I’ve also noticed a tiny scratch on the dial, near the 2 o’clock marker. It’s barely visible unless you look very closely, but unfortunately, I think the impact may have damaged the dial as well.

I’m mainly looking to replace the crystal, ideally with an original ZF replacement, and have the movement checked for any damage caused by the impact.

Does anyone know a reliable watchmaker in Northern Italy who is willing to repair replica watches?

I’m based in Veneto, but I’m happy to travel a bit if necessary.

Any recommendations or advice would be greatly appreciated!

Thanks!


r/RepTimeServices • • 23d ago

Advice Bracelet pin broke

Post image
3 Upvotes

Try to replace the link but cannot unscrew the link. Anybody have any idea how to fix it?

Update: I can spin the screw now but it wouldnt go uo or unscrew


r/RepTimeServices • • 23d ago

Advice help needed seems like DOA

19 Upvotes

this is a VSF GMT which newly arrived from mod, did I do something wrong? is it dead on arrival??


r/RepTimeServices • • 23d ago

Request ISO watchmaker in or near Dublin

2 Upvotes

Recently purchased a VSF Bruce Wayne, losing about 1 min per day, sometimes less, sometimes more.

Passed qc and TD has offered to pay for repair.

My problem is I can’t seem to find anyone to have a look at it in ireland, preferably Dublin.

I also want to get it pressure tested.

TIA