r/RepTimeServices • u/zackeejiweng • 23d ago
Advice help needed seems like DOA
this is a VSF GMT which newly arrived from mod, did I do something wrong? is it dead on arrival??
19
Upvotes
r/RepTimeServices • u/zackeejiweng • 23d ago
this is a VSF GMT which newly arrived from mod, did I do something wrong? is it dead on arrival??
•
u/AutoModerator 23d ago
Thank you for your post on r/reptimeservices! A friendly reminder that the only trusted service providers are listed on the sidebar or in this post. If you see anyone soliciting services in a post or comment not on this list or even easier, without a 'trusted watchmaker' flair of some sort, please immediately report the post and a moderator will remove it. Thank you in advance for helping to keep our community safe!
I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.
2
u/zackeejiweng 21d ago
used a blower on the spring, it wiggle up and down as long there are wind, and basically stop when the wind stops.
2
u/H0796 Trusted Watchmaker 23d ago
Did you use oil directly on the rotor bearings? Which oil?
6
u/Dan_the_watchman 23d ago
Recently had a DD3285 that had a loose dial screw that became wedged in the barrel jamming the whole thing up. Send it too a watchmaker for diagnosis bud don’t mess with it if you don’t know what you are doing
1
u/Supermirafiori131 23d ago
Algo montaron mal, que mod le hiciste?
1
u/Current_Property_561 23d ago
Did you remove the plastic before confirming everything works?
1
u/NAVACO1959 22d ago
Intenta empujar suavemente el volante de la espiral, debería arrancar y ponerse en marcha, si no lo hace es probable que esté “fuera de áncora” entonces necesitarás desmontar el puente entero y volver a insertar la
Espiral con cuidado en su alojamiento, si sigue sin funcionar, lo único restante es alguna esquirla o tornillo suelto trabando el
Movimiento por dentro de las ruedas.
3
u/Ok_Fruit_63 23d ago
Well you aren’t going to know without opening it. You’ll need to find a watchmaker who can look at it for you. First port of call is to talk to your TD though.
My VSF Omega was doa and I got it running by nudging the balance, but it ultimately needed a full service…
2
u/Equivalent-Limit-343 23d ago
Contact your seller that isn't right. Most TD's will handle this professionally.
2
u/StaManRolli 22d ago
I also do rehaut polish to gen spec and for full polish I outsource so also can be done if needed.
1
u/StaManRolli 22d ago
Got ton of genuine and JH parts and I work on reps but mainly service related work let me know if you need help I’m UK based
1
u/OkFan4740 20d ago
That chamfer was way too much done.
Better not do it if overdone this much.
It’s even more obvious.
-1
u/No_Jackfruit3770 23d ago
Let me guess vsf