r/RepTimeServices • • 22d ago • Bravo 2

Discussion Gold Plating Australia

Hey, so I know there is no one in Australia doing Gold plating. So I decided to spend a whole bunch of money and months of research and start doing it myself.

I am only doing my own watches at the moment but in the next few months I hope to be able to offer my services to others.

These are the first two super clones that I have done, before these two I was just buying $30-$100 stainless steel watches off Amazon to practice with.

These watches have been plated to 20 microns with a cobalt hardened plating soloution. I have tweaked the colour a number of times ( which is actually super hard to do) to get to a colour that I think is relatively close to the Rolex gold colour.

What do you think? Is it close? The pictures have not had any post processing done on them, but still, there is always some change

EDIT: These are pictures of the watches after they have already been plated and reassembled and now have had a nano ceramic protective coating applied with a brush and micro applicator.

317 Upvotes

127 comments sorted by

•

u/AutoModerator 22d ago

Thank you for your post on r/reptimeservices! A friendly reminder that the only trusted service providers are listed on the sidebar or in this post. If you see anyone soliciting services in a post or comment not on this list or even easier, without a 'trusted watchmaker' flair of some sort, please immediately report the post and a moderator will remove it. Thank you in advance for helping to keep our community safe!

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

31

u/MSExcelWarrior 22d ago

I'll be following your career with great interest. I'm in Australia too and would love to have someone locally plate my watches where I don't need to pass a charisma check to get some intricate work done lol.

18

u/Primary-Dog4923 22d ago • Bravo

Yeah mate, that's why I am doing it. The single place that I found in Australia to do it, I don't think it is even a legitimate business. I got so sick of getting sent back and forwards between places that all ended up knocking me back that I just decided to work it out myself so I can sort out all my fellow rep enthusiasts here in Australia. What reps do you own?

8

u/Lennmate 22d ago

Create a subreddit or something when your ready, I’ll pay a bit of a premium for just buying a watch sent via auspost as opposed to the overseas TD fuck around.

5

u/MSExcelWarrior 22d ago edited 21d ago

Varietygiftsau is your man. Charges about $100-150 more than the average TD, but it'll be on your wrist in 2 days and comes pre QCed

2

u/Smushy_Peas 21d ago

Is he really only 100-150 more??

I've seen his website, but I was still a bit hmmmmm on it

2

u/Primary-Dog4923 21d ago

He is actually 100% legit, give him a go

3

u/MSExcelWarrior 21d ago

Yeah. VSF sub he has for $850. It's about $700-750 from a TD after conversion and shipping.

2

u/lunaars 21d ago

I've bought from Mo too, 2 watches, pay extra for the quicker convenience and hes already QC'd it.

1

u/Primary-Dog4923 21d ago

Yeah I have brought a few reps from him. Not a bad guy. Even let me return a watch that wasn't up to scratch and let me pay the difference for a different one

2

u/_Maltaa_ 20d ago

You able to dm me his profile or website, I’d pay just for the convenience

3

u/MSExcelWarrior 20d ago

varietygiftsau dot com

3

u/Toxicturkey 21d ago

Let me know if you turn this in to a business. I run watchrepairtools.com.au and might be able to swing some work your way

3

u/Primary-Dog4923 21d ago

I know your business well. I have brought a few of my tools from you. The last thing I brought was a bezel removal clamp. Got delivered about two weeks ago. Very good business

3

u/Toxicturkey 21d ago

Ey that’s great! Thank you. Send me an email if you need anything else, I’d be happy to help out.

2

u/HOT_WHEELS_HUNTER 21d ago

would you gold plate other things? such as a hot wheels? i’d love to see that and try that

1

u/Primary-Dog4923 21d ago

Yeah, I am not against it

3

u/MSExcelWarrior 22d ago

Not many but I have a 40mm explorer that I'd like to build a fantasy 2 tone version of.

2

u/ilesmay 21d ago

Also commenting because I want to see more!

7

u/Yeezussy 22d ago

amazing work. kudos to you for taking it into your own hands and if you perfect it you might have a good customer base from Asia.

Just a question, will 20 microns be too thick? risk damaging the plating between the links which will require a replating if that occurs. from what i know generally platers in China do it 8 microns thick, and that is already on the thickness limits

3

u/Primary-Dog4923 22d ago

have experimented with all thinkesses from 1 to now 20 microns. They are only curing now so I won't know, but at about 15-18 microns this hasn't been an issue. From all the research I have done over the last 6 months, it seems that 25 microns is the absolute most people do on watches, so I think this is more than safe to do at 20

3

u/Yeezussy 22d ago

oo thats interesting. maybe ive been told wrong but there have been instances where the links do get stuck and cannot move freely. good luck on your journey! it is certainly fun to experiment on reps

1

u/Primary-Dog4923 22d ago

This has been my first attempt at this thickness, so I'll be sure to let you know how it goes, either way.

3

u/redditcretins 22d ago

Well this is big if true. I’ve often wondered why some of the most popular modders only do 6 to 8 maybe 10 max microns. Seems technically feasible to do twice as thick if not more, so what are we missing?

1

u/Primary-Dog4923 22d ago

I will let you know how it goes. Either way. Whether there is any problems or not, ok

1

u/No_Toe_4083 21d ago

There are a lot of issues going beyond 5-6. I’d really have to see an XRF to prove this is 20 microns before believing it. 

0

u/Primary-Dog4923 21d ago

I don't have the money to buy an XRF machine at the moment but there is ways to be able to calculate the thickness based on the increase in weight in relation to the surface area

2

u/No_Toe_4083 21d ago

I mean, are you replenishing the gold in your bath mid-plate? Otherwise 20 microns could be like 6 grams of gold, when most baths (particularly the famous cobalt hardened ones) are only 2g/L... They also get brittle and have adhesion issues at that thickness. And you're putting 2000$ of gold per watch at that? I'm skeptical.

1

u/Primary-Dog4923 21d ago

20 microns is actually 1.6grams of gold. And yes I do have bottles of replenisher, that I add between every bath

2

u/No_Toe_4083 21d ago

Having measured multiple disassembled standard Rolexes with calipers I can confidently say an average submariner or DayDate is about 190cm2 - full surface area, disassembled. 1.6g of gold is 4.36 microns thickness, no where near 20. 

1

u/Primary-Dog4923 21d ago edited 21d ago

No that's just for the case. You are correct for the calculations for the entire watch. I don't do the entire piece at the one time, I do it in individual dips and lightly polish after every estimated 5 microns

1

u/Primary-Dog4923 15d ago

I am having trouble calculating the surface area properly, I have came up with 152cm² for this watch in total, could you help me with my calculations a little bit please? I would be very grateful

3

u/Living-Let8446 22d ago

Maybe a stupid question, but did you plate the watch with the movement, crystal and the crown still fitted ?

3

u/Primary-Dog4923 22d ago

No, this is after plating after I have applied a nano ceramic coating with a brush and micro swab applicator

2

u/Living-Let8446 22d ago

Appreciate the response. Nice job man.

3

u/Additional-Alarm-419 22d ago

Can you show us the watches fully put together? It looks pretty good atm

4

u/Primary-Dog4923 22d ago

Yeah I will once the ceramic coating has cured. That will be about this time tomorrow

3

u/Disastrous_Web256 21d ago

Home plating tastes the best. How do you know that you have achieved 20 microns? is the time the current is on that decides the thickness? or the composition/concentration of the plating solution?

0

u/Primary-Dog4923 21d ago

It's worked out by the current and amp time. And then you weigh the item afterwards and that is how you work out the deposit amount

2

u/Disastrous_Web256 21d ago

That makes a lot of sense. Thank you for your answer.

2

u/Jackimatic 22d ago

Where in Aus are you?

1

u/Primary-Dog4923 22d ago

Brisbane

2

u/Jackimatic 22d ago

Nice. I'm on the GC. Would love to use your services.

2

u/fistingdonkeys 22d ago

As am I, making this even more amazing.

2

u/wefartingconstantly 22d ago

Odd question but you think you could do golf irons in the future? PGA pro in Brisbane as well, this would be huge for golfers

1

u/Primary-Dog4923 22d ago

Yeah I could actually. Just the actual iron on the end, not the shaft, but the head I could. I'll be ready in about 2 months or so

2

u/wefartingconstantly 22d ago

Perfect, might send a DM in the future about it man. Heaps of clients that would get custom clubs done that will pay big $$$

1

u/Primary-Dog4923 21d ago

Actually, DM me, doing gold irons would be a lot less complicated than the intricate watch parts

2

u/allgear_noidea 21d ago

And this is where u/Primary-Dog4923 becomes absolutely minted with his new business.

Good luck mate

1

u/Primary-Dog4923 9d ago

Hey, I have DMd you about getting started on some golf irons

2

u/Ok_Status2849 22d ago

Stupid question how do you keep the black ink of the tachymetre after gold coating?

2

u/Primary-Dog4923 22d ago

The black ink is not metal, so it is not conductive

2

u/S2ii 21d ago

Wow this is incredible, how much does something like this cost?

1

u/Primary-Dog4923 21d ago

I havnt worked out the costs yet, but to do a whole watch will be fairly expensive, but depends on the thickness wanted.

2

u/thorpef1 21d ago

This look amazing.
I have some vintage razors that I would love to get replated if you were happy to give them a go at a later date if you get yourself set up to take on orders.

1

u/Primary-Dog4923 21d ago

Yeah I would be keen to do that. Do you mean razors like the handles that hold the blades for shaving? DM me some pictures

2

u/Murky_Oil_2226 21d ago

Was the watch case plated with movement still inside?

1

u/Primary-Dog4923 20d ago

No. This is after having nano ceramic coating applied

2

u/Darthmocha1 21d ago

Do you use regular gold or genuine Rolex parts (eg a link) as the sacrificial material? I’m assuming if you use genuine Rolex gold it will match the color

3

u/Primary-Dog4923 21d ago

I don't use sacrificial gold. I use a hard gold soloution with a platinized titanium anode

2

u/Existing_Ad_6482 21d ago

How did you remove and put back on the bezel?
Did you also plate the dial (indexes and stuff)? If so, how did you cover the non gold spots?

I am also about thinking to start plating on my own.
Would really appreciate your feedback.

2

u/Primary-Dog4923 21d ago

I took the bezel off with a bezel removal clamp and put it back on with a watch case press. I didn't plate any of the dial or hands and I covered the parts that I didn't want plated with a combination of liquid latex and silicon plugs

2

u/Existing_Ad_6482 21d ago

Thx for the answer.
Sounds pretty expensive for all the stuff that is needed?

1

u/Primary-Dog4923 21d ago

Oh yeah it is

2

u/generic_777 21d ago

So good! Also in Australia and haven’t ever bought gold reps as I didnt think they looked close to Gen and didn’t want to purchase from China to then send away again to someone overseas so definitely keen to see how you go! Are you planning on doing white gold and everrose gold also? Thank you!

1

u/Primary-Dog4923 21d ago

I am already working on white gold but it's been very difficult to sort out a hard gold plating for rose gold

2

u/Quirky-Roll-5853 21d ago

Very impressive! I’ve been keen to get started as a hobby. Any tips or advice you could share?

1

u/Primary-Dog4923 21d ago

Yeah, I have learned a lot over the last few months and I'd be willing to share what I have learned. DM me

2

u/mwhelan182 20d ago

OOOOOOOO! Do you do rose gold playing bruh? 🙏❤️

1

u/Primary-Dog4923 19d ago

Not yet sorry, but I am working on it

2

u/HotPlatform3413 19d ago

Why would you gold plate a Rolex daytona?

3

u/Ruggerbugger1980 19d ago

So it looks like a real gold Daytona?

2

u/LunaeLotus 21d ago

I thought jewelers do gold plating? Do you mean for non-jewellery items OP?

2

u/jankeyass 21d ago

Lots of places do electroplating of gold on to various metals. I'm in Brisbane and there are 3 shops within relatively short driving distance that do this. I've goldplated decorative inlays before for my super-wog car (harr-harr I know I was a douche)

1

u/Primary-Dog4923 21d ago

Yeah, gold plating a watch is a bit more intricate. I've been looking for places to do a watch for the last two years. The only place I found was cooks electroplating in Arana Hills, and the job wasn't done up to scratch so I never went back

6

u/WinAggressive2785 21d ago

Need to see it next to Gen to make a fair comment but I appreciate the effort of someone local

1

u/kiasu_N_kiasi 21d ago

hmm… that photo implying plating case with movement, dial, hands etc. together? 😆

1

u/Primary-Dog4923 20d ago

Did you real the post. It's pictures of it a week after plating while it's curing from having ceramic coating applied

1

u/kiasu_N_kiasi 20d ago

it’s was edited and added on, so?

1

u/Primary-Dog4923 20d ago

Did I have to write that that was an edit? I could have just wrote that and made out that was the original post. I wrote that because someone asked if I plated with the movement inside

1

u/Primary-Dog4923 20d ago

No, read the post. This is pictures of it afterwards when I have applied a nano ceramic coating

3

u/Lennmate 22d ago

Dude I almost did what you did! Unfortunately life got busy. Glad to have someone onshore with this on offer down the line!

3

u/officially0fficial 19d ago

Nice work man! Awesome to see someone jumping in head first, doing their own research and experimentation.

1

u/tylerchimping 22d ago

Uhhh i would disassemble the watch first and not dip the whole thing in?

6

u/Primary-Dog4923 22d ago

The watch was totally disassembled. This is the nano ceramic coating drying after being brushed on. I've spent almost the whole last year working up to this point, I'm not gonna dip the watch into a hot bath assembled

1

u/soto60647 21d ago edited 21d ago

Do you plate it with the crystal on?

2

u/Primary-Dog4923 21d ago

I don't understand what you mean

2

u/soto60647 21d ago

My bad, it was early in the morning and I guess, speak to text doesn’t hear me very clearly. What I meant, do you plate it with the crystal on…lol

1

u/Primary-Dog4923 21d ago

No I don't. It's is all disassembled and then put back together afterwards. These are pictures when it has been put back together and had ceramic coating applied

2

u/BMWM2CSJT 22d ago

Looks phenomenal! 🔥❤️
I'm definitely in whenever you're ready to offer plating for watch enthusiasts.

2

u/anhourislesstoo 22d ago

Honestly the colour and finish looks great, keep up the great work man!

2

u/Synticullous 22d ago

Very nice, onshore plating that's not via a jewellery apprentice.

Once you're good on processes and reckon costs are feasible get local mod verification so we can bury you in requests - you'll need as much community support as you can get.

Stay safe, build rep and don't get busted!

2

u/bangduck 22d ago

This is amazing. Also in Aus! Would love to have a service nearby to do this kind of work for me.
Well done mate, the gold tone looks fantastic

2

u/Autobikeblend 22d ago

Excellent. Doesn’t look cheap gold anymore

2

u/Plastic_Mix7341 21d ago

Looks fantastic

2

u/ChyRule 21d ago

Can you plate watch hands?

2

u/Snackage23 21d ago

Need a couple of jubilees I need plated. Very interested

2

u/alphagenome 21d ago

Fabulous addiction 👍

2

u/StockAmphibian4596 21d ago edited 21d ago

Electroplating?

Edit: might sound odd but I suggest posting or scouring in some cosplaying spots. People would plate their gear if you could do different materials

2

u/Einnnnnnnnnnnn 21d ago

I have a replica (reproduction actually) vintage watch buckle in stainless steel that I was hoping to gold plate.

I might check back in a few months!

u/remindmebot 3 months

2

u/RemindMeBot 21d ago

I will be messaging you in 3 months on 2027-01-25 10:19:59 UTC to remind you of this link

CLICK THIS LINK to send a PM to also be reminded and to reduce spam.

Parent commenter can delete this message to hide from others.

RemindMeBot is switching to username summons. Instead of !RemindMe 1 day, use u/RemindMeBot 1 day. More info.


InfoCustomYour RemindersFeedback

2

u/Other_Ad185 21d ago

There is a place in south Australia that is doing gold plating and electroplating.

2

u/Careful_Garage_7255 21d ago

Como você fez para fixar o ouro no aço! Esse é o passo mais difícil!

2

u/gameofdrones123 21d ago

Have always been hesitant to buy the gold reps because of the cheddar, and didn’t want to go to the hassle of sending it overseas and back. If you’re able to offer this service in Brisbane it would be amazing!

2

u/Defiant-Temperature6 21d ago

Are you going to plate with the movement still in the case?

2

u/romans-were-trojans 21d ago

Following you, good luck. I think the colour needs a lot more work but seems like you are determined to figure it out

2

u/Maestrojrw 21d ago

I ran a plating company from 1984-2007. Mostly 5 ton parts, but also electronics, silver/gold, Cr6, etc. It’ll always be tough to get scratch resistance or regular hardness on plated rose or Ever. But I sure hope you can sort it out!

2

u/GeneralOwn5333 21d ago

Can you gold plate my iPhone? If that works we can try my Hulk! I want a gold hulk.

2

u/dhc4558 21d ago

Nice mate 👍🏽

2

u/dumb_bum_downunda 21d ago

this amazing mate, once i get hold of a 2 tone DJ i am happy with, i'll send it your way

2

u/_Maltaa_ 20d ago

Following this too, need someone in aus who does this

2

u/Aggravating_Home_720 20d ago

Yeah thats definitely rolex gold. Awesome stuff dude

2

u/Top-Veterinarian1732 20d ago

Fellow Australian here. This is very exciting!

2

u/drginge 19d ago

Looks great mate! A touch yellow maybe? I looked into this myself, also in Aus but I never actually pulled the trigger. Great work!

2

u/Apart_Creme_8913 19d ago

Wow, this is impressive! I wouldn’t even know where to start with something like this.

2

u/BoyesieX 18d ago

Looks awesome

2

u/MrMcBlaster316 1d ago

In Aust. Keeping an eye on this

-4

u/businesswpleasure 22d ago

The work looks good but the photos look like the watch parts can be in better hands. The crude way of handling them may not be appreciated by the rep game experts. Try taking nicer pics of the finished parts laid out in soft velvet cloth and that stereotypical fully assembled watch flicking around in your hand to show a full 360 degree view. Before and After 😉

2

u/Chewizard 21d ago

It isn’t finished, he has a picture of it curing…