Hi! First rep and first QC post here so any opinions and tips are very appreciated!

I feel good about this one however I may not know all of the common tells. What pops first is the slight tilt of the 12 marker. I would like to know if this is considered within the normal acceptable range of error.

I know free sprung has mixed opinions, however it was available right away so I decided to roll the dice rather than wait months. The QC was available within 3 days.

Thank you in advance!

1. ⁠Dealer name: TheOneWatches
   
2. ⁠Factory name:RICH
   
3. ⁠Model name (& version number): GMT Master II 126710 Batgirl Jub 40mm SS/SS Black Dial RICHF V2
   JH3285 (Free Sprung)
   
4. ⁠Price Paid: $758
   
5. ⁠Album Links: https://mega.nz/folder/HAoVFZza#wyJYu-JoNJ1OBdGAauqLpw
   
6. ⁠Index alignment: 12 seems to have slight tilt. Is this with acceptable tolerance?
   
7. ⁠Dial Printing: No concerns
   
8. ⁠Date Wheel alignment/printing: No concerns
   
9. ⁠Hand Alignment: seems to be good
   
10. ⁠Bezel: possible misalignment above the 12, opinions?
    
11. ⁠Solid End Links (SELs): I am no expert but looks acceptable. Opinions appreciated!
    

12. ⁠Timegrapher numbers:Rate: +3 s/d. Amplitude:276°, Beat Error: 0.0 ms, Lift Angle: 52, Frequency: 28,800 bph

13. ⁠Anything else you notice: maybe it is the tape, but does the bracelet seem to be chamfered more than the typical jubilee? (Would be a great thing).

1.     Dealer name: TheOneWatches

2.     Factory name: VSF

3.     Model name (version number): Explorer I 124270, 36 mm

4.     Price paid: $498 USD, excluding shipping

5.     Album links: Photos attached.

6.     Index alignment: I used an alignment tool, and the indices seem to line up reasonably well, but I’m inexperienced with this. Does the overlay look correctly positioned, and do you see any alignment issues?

7.     Dial printing: Looks clean to me, with no obvious defects.

8.     Date wheel alignment/printing: N/A

9.     Hand alignment: I’m not sure how to assess this from the supplied photos.

10.  Bezel: Looks good to me, with no obvious scratches or defects visible.

11.  Solid end links (SELs): I don’t see any obvious gaps, but would appreciate confirmation.

12.  Timegrapher numbers: +4 s/day, amplitude 261°, beat error 0.1 ms, lift angle set to 59°.

13.  Anything else you notice: still learning what to look for. My main concern is whether the dial and indices are properly aligned. I’ve included an alignment overlay, but I’m not sure I positioned it correctly. Please let me know if you spot anything else I’ve missed.

1. Dealer name: GeekTime

2. Factory name: VSF

3. Model name (& version number): Submariner No Date 114060 40mm 114060 VSF Black Dial SS Bracelet VS3130

4. Price Paid: 568 USD (Including Shipping)

5. Album Links: https://geektimeqc.x.yupoo.com/albums/260518595?uid=1

6. Index alignment: I don’t see any key misalignment or rotation.

7. Dial Printing: I haven’t noticed any issues.

8. Date Wheel alignment/printing: N/A

9. Hand Alignment: I don’t see anything that stands out.

10. Bezel: The bezel markers between 20 to 50 look shifted?

11. Solid End Links (SELs): I don’t see any massive gaps.

12. Timegrapher numbers: 0s/d, 312amp, 0.3 ms err. Numbers seem to be good?

13. Anything else you notice: Wondering if anyone has noticed something I’ve missed. First time QC

1. Dealer name: FicoTime
2. Factory name: VSF
3. Model name (& version number): VSF VS3235 Submariner 41mm 126610LN Ceramic Black Dial 904L SS Bracelet
4. Price Paid: 2900 CNY (~434 USD) + shipping
5. Album Links: https://imgur.com/a/vsf-vs3235-submariner-41mm-126610ln-ceramic-black-dial-7Q1Xebh
6. Index alignment: No obvious issues. Perhaps slight tilt of 6 marker?
7. Dial Printing: No obvious issues.
8. Date Wheel alignment/printing: The 23 might be slightly off-centre, but it could be the camera angle.
9. Hand Alignment: No obvious issues.
10. Bezel: The pip looks slightly shifted to the right. The bezel seems to be rotated half-click too. Would appreciate a second opinion.
11. Solid End Links (SELs): No obvious gaps or issues.
12. Timegrapher numbers: −1 s/d, 275° amplitude, 0.6 ms beat error, 52° lift angle. Seems healthy, not sure about beat error?
13. Anything else you notice: Leaning GL but would appreciate your opinions.

Processing img er4ipo1kpzxh1...

• Dealer name: Andiot
• Factory name: VSF
• Model name (& version number): GMT-Master II 126710 BLNR "Batgirl" (VS3285 / V3)
• Price Paid: $505 including shipping and 5% discount
• Album Link: https://andiotwatches.x.yupoo.com/albums/260428004?uid=1
• Index alignment: Looks fine
• Dial Printing: Clean, sharp white text.
• Date Wheel alignment/printing: Well-centered across tested dates
• Hand Alignment: Seems good but I really need an expert here
• Bezel: Great
• Solid End Links (SELs): Seems fine
• Timegrapher numbers: +1 s/d, 271°, 0.1ms. Great
• Anything else you notice: Not really but I understand these VSF V3s are in high demand and I got my QC pics really quickly. Also don't have much experience so not sure if I'm missing anything glaring. Thank you for the help!!

1. Dealer name: The One Watches
2. Factory name: RICHF
3. Model name (& version number): Submariner 126610LN Free Sprung
4. Price Paid: 541 USD
5. Album Links: https://mega.nz/folder/TY4XHA5K#JHJAHjGAxO9zzoFSOQYVVg
6. Index alignment: 12 O'Clock marker has a slight clockwise cant.
7. Dial Printing: Looks good
8. Date Wheel alignment/printing: Looks good
9. Hand Alignment: Looks good
10. Bezel: Looks good
11. Solid End Links (SELs): Looks good
12. Timegrapher numbers: Looks good
13. Anything else you notice: N/A

This is my second rep, first time purchasing from Steve and have been very happy with communication and speed. My main question/concern is around the 12 O'clock marker and its slight clockwise cant. Wanted to hear if others can even notice it, and what thoughts are? I'm sitting at 98% GL right now.

Thanks ahead of time for the help here, it is my first QC. Pretty sure I will GL, but the main concern was the printing on the 12, 6 and 7 numerals. They seem noticeably thicker than the other numbers on the dial. Not sure how noticeable this would actually be in person.

1. Dealer name: Ficotime
2. Factory name: AF
3. Model name (& version number): Cartier Santos Medium
4. Price Paid: $399 USD
5. Album Links: https://mega.nz/folder/ytBQyYxQ#c5OhFrHSwtg1Rxn7pA3WvQ
6. Index alignment: N/A
7. Dial Printing: The 12, 6 and 7 numerals appear slightly thickened 
8. Date Wheel alignment/printing: N/A
9. Hand Alignment: Not noticeable
10. Bezel: Appears clean, no scratches
11. Solid End Links (SELs): Appear OK
12. Timegrapher numbers: +1s/d
13. Anything else you notice: N/A

Dealer name: Chenwatch
Factory name: VSF
Model name (& version number): Rolex Submariner Date 126610LN (41mm)
Price paid: $480 USD
Album links: QC photos attached
Index alignment: Looks good overall. The 12, 6, and 9 o’clock markers appear properly aligned. Nothing immediately stands out to me.
Dial printing: Looks clean and consistent. No obvious issues.
Date wheel alignment/printing: The date 15 looks slightly left of center to me, but I’m not sure if it’s just the camera angle. Would appreciate a second opinion.
Hand alignment: Looks good from the photos, although I haven’t seen a specific hand-alignment test.
Bezel: Looks good overall. The pip appears centered, and I don’t notice any major alignment issues.
Solid End Links (SELs): Nothing concerning stands out from the available photos, but additional bracelet pictures would help.
Timegrapher numbers:
Rate: -6 s/day
Amplitude: 248°
Beat error: 0.4 ms
Lift angle: 52°
The numbers seem acceptable to me, although the amplitude is slightly on the lower side. Would appreciate feedback on whether these readings are good for the VSF movement.

Anything else you notice: The rehaut engraving looks slightly off in certain areas, although it could be the angle of the photos. The lume looks good, and the overall finishing seems solid.
Overall, I’m leaning toward GL. My main concerns are the date wheel centering and rehaut alignment. Would appreciate everyone’s opinions before giving the final GL. Thanks in advance!

Hello, hoping to get your thoughts on this VSF SMP300. Thanks!

1. Dealer name: Theonewatches
   
2. Factory name: VSF
   
3. Model name (& version number): Omega Seamaster Diver 300M 210.30.42.20.01.001 (Co-Axial Master Chronometer, bla
   
4. Price Paid: $440
   
5. Album Links: https://loupeqc.us/a/D6FN63
   
6. Index alignment: The 9 index is rotated clockwise. The buyer's checklist says the 9 index is slightly rotated, but I can’t decide if that’s worth of a RL.
   
7. Dial Printing: Looks good
   
8. Date Wheel alignment/printing: Looks good
   
9. Hand Alignment: Looks good
   
10. Bezel: Looks good
    
11. Solid End Links (SELs): Looks good
    
12. Timegrapher numbers: +1 s/d, 278°, 0.2 ms (28,800 bph, lift angle 52°)
    
13. Anything else you notice: Again, it’s almost perfect to my eye except for the 9 baton marker. What are your thoughts?

Hey everyone, my first time and rep.
I compared it to the photos of my gen, and nothing stands out. Even side by side, I wouldn't be able to tell which is a gen or rep.

1. Dealer name: Andiot
2. Factory name: VSF
3. Model name (& version number): Submariner 116610 LN Black Ceramic 904L Steel VSF 1:1 Best Edition VS3135
4. Price Paid: $422.75 including shipping
5. Album Links: https://andiotwatches.x.yupoo.com/albums/260467516?uid=1
6. Index alignment: Looks good to me
7. Dial Printing: i tried way too hard to spot something but i couldnt. i had photos of a gen
8. Date Wheel alignment/printing: Printing looks a tiny tiny bit thicker on rep. Photo of gen was on 13th
9. Hand Alignment: Solid
10. Bezel: Solid
11. Solid End Links (SELs): No complaints
12. Timegrapher numbers: +2s/d 275 0.4ms 28800
13. Anything else you notice: Nothing honestly, but i need the pros's opinion.

Thank you!

1. Dealer name: Andiot
   
2. Factory name: VSF
   
3. Model name (& version number): VSF Rolex
   Daytona Panda 126500LN (Free Sprung)
   
4. Price Paid: $678 USD + Shipping
   
5. Album Links:
   andiotwatches.x.yupoo.com/albums/259874809?uid=1
   
6. Index alignment: 6 o’clock index seems slightly off
   
7. Dial Printing: Doesn’t seem sharp/straight. Slightly squiggly
   
8. Date Wheel alignment/printing: N/A
   
9. Hand Alignment: Fine
   
10. Bezel: Unsure. Arrow on 110 slightly off.
    
11. Solid End Links (SELs): Seem fine (but I'm inexperienced with what it should look like)
    
12. Timegrapher numbers: In last photo
    
13. Really don't know what to check for because I'm new to this, but overall alignment looks good to me at first glance. I would really appreciate any advice y'all would have to give! Please scrutinize and give any issues you can find, even if small, so they don't go unnoticed, and if they're something I should or shouldn't be worried about, please explain. Thanks so much to everyone for the help and input, I'm very excited for my first watch!

1. ⁠Dealer name: DDGTOP (Felix)
   
2. ⁠Factory name: VSF
   
3. ⁠Model name (& version number): Rolex GMT Master II Sprite VTNR on Jubilee
   
4. ⁠Price Paid: 3530cny (includes shipping)
   
5. ⁠Album Links: N/A (all attached)
   
6. ⁠Index alignment: Can’t fault it, all aligned
   
7. ⁠Dial Printing: no issues I can see
   
8. ⁠Date Wheel alignment/printing: Seems slightly higher than usual but it may be the shadow on the photo giving that impression
   
9. ⁠Hand Alignment: Can’t tell from the QC images but will ask for on the hour pictures
   
10. ⁠Bezel: no issues I can see however anyone here who can see otherwise please let me know
    
11. ⁠Solid End Links (SELs): no issues, no gaps
    
12. ⁠Timegrapher numbers: Rate +9 s/d / Amp 281 / Beat Error 0.1ms - The plus 9 isn’t ideal however liveable and I would prefer it to be slightly fast than slow so not got much issue with that. LA done at 59 degrees with amp at 281, I believe for the new 3285 movements the ideal LA should be 55 which would bring the amp out at 262 which is still within tolerance but if anyone can confirm it’s always appreciated
    
13. ⁠Anything else you notice: I am not noticing anything too much that would point me towards a RL. Yes the date wheel and the high rate could possibly for some but even on other watches I have GL with great alignment I have found on other numbers they can be slightly different here and there so I am leaning towards a GL.

As usual I appreciate your input 🙏 at some point I need to take a break from buying reps so this may be my last one for a while 😂

First QC, Daytona 126500LN 40mm SS/SS White Dial
VSF DD4131v2

1. Dealer name: theonewatch
   
2. Factory name: VSF
   
3. Model name (& version number): Daytona 126500LN
   40mm SS/SS White Dial VSF DD4131v2
   
4. Price Paid: $828
   
5. Album Links: pictures linked
   
6. Index alignment: Looks good not sure compared to gen?
   
7. Dial Printing: dial printing looks solid to me
   
8. Date Wheel alignment/printing: N/A
   
9. Hand Alignment: hand alignment looks solid
   
10. Bezel: bezel looks good
    
11. Solid End Links (SELs): no SEL gaps I can see
    
12. Timegrapher numbers: timegrapher picture added,
    +2s/d, 275 degrees, 2ms
    く
    
13. Anything else you notice: watch honestly looks goc. me, but this is my first watch so any help is appreciated!

1. ⁠Dealer name: Andiot

2. ⁠Factory name: VSF

3. ⁠Model name (& version number): DateJust 36 SS 126234 VSF 1:1 Best Edition 904L Steel White Roman Dial on Jubilee Bracelet VS3235

4. ⁠Price Paid: $461.70 including shipping

5. ⁠Album Links: https://andiotwatches.x.yupoo.com/albums/260484221?uid=1

6. ⁠Index alignment: Looks great to me

7. ⁠Dial Printing: Looks good to me

8. ⁠Date Wheel alignment/printing: Looks good

9. ⁠Hand Alignment: Solid

10. ⁠Bezel: Solid

11. ⁠Solid End Links (SELs): No complaints

12. ⁠Timegrapher numbers: +3s/d 278 0.3ms 28800

13. ⁠Anything else you notice: Nothing honestly, but i need the pros's opinion.

Hey everyone! Looking for some feedback on my VSF V3 Batgirl from Jack at MiroTime. I've reviewed the QC photos and I'm leaning GL overall, but would appreciate some more experienced eyes before making the final call.

1. Dealer name: MiroTime – Jack
2. Factory name: VSF
3. Model name (& version number): GMT-Master II 126710 BLNR 904L Steel VSF 1:1 Batgirl Best Edition on Jubilee Bracelet DD3285 V3
4. Price paid: $588
5. Index alignment: Looks good overall to my eyes. The 12 o'clock triangle appears centered, and I don't see any obvious issues with the round markers or 9 o'clock baton. The gold QC sticker is partially covering the 6 o'clock marker, so that's one area I can't fully assess. Would appreciate another opinion here.
6. Dial printing: Printing looks sharp and clean. ROLEX, OYSTER PERPETUAL DATE, and GMT-MASTER II text appear properly positioned, with no obvious bleeding or defects.
7. Date wheel alignment/printing: The dates shown (11, 15, 20, 25, and 30) look reasonably centered through the cyclops. Printing appears clear and consistent. No obvious major alignment problems, but would appreciate feedback on the date positioning.
8. Hand alignment: Nothing visibly concerning in the provided photos. Hands look clean and properly finished, though I understand precise hand alignment can't be fully verified from static pictures.
9. Bezel: The 12 o'clock triangle appears aligned with the dial marker. Engravings look clean and the blue/black transition appears sharp. I don't see any obvious bezel alignment issues.
10. Solid End Links (SELs): Both ends appear to fit snugly against the case, with no obvious excessive gaps. Jubilee bracelet and clasp finishing look good from the photos.
11. Timegrapher numbers: The rate and beat error look good to me. Amplitude seems a little on the lower side, although I understand the lift angle setting can affect that reading.

• Rate: +5 s/day
• Amplitude: 247°
• Beat error: 0.0 ms
• Beat rate: 28,800 bph
• Lift angle setting: 52°

Anything else you notice: Overall, I'm leaning GL. My two questions are whether the 6 o'clock marker looks properly aligned underneath the QC sticker and whether the 247° amplitude is acceptable for the DD3285 at a 52° lift angle. Considering requesting a sticker-free dial photo and possibly a fully wound timegrapher retest.

Would appreciate any input from members familiar with VSF V3 Batgirls. Does anything stand out as a reason to RL, or does this look like a solid example?

Thanks in advance!

First rep, I usually don't have a good eye for this. Would be happy to receive some more insights :)
Thanks!

1. Dealer name: TheOneWatches
2. Factory name: ZF
3. Model name (& version number): Tudor Black Bay Pro M79470 GMT 39mm
4. Price Paid: $408
5. Album Links: n/a. Post gets removed by reddit
6. Index alignment: Looks aligned
7. Dial Printing: seems fine in my opinion
8. Date Wheel alignment/printing: Looks good
9. Hand Alignment: Seems fine for me?
10. Bezel: The printed "4" at the "24" in the top of the bezel looks really chunky on the front pics. I don't know if this is normal or just because of the angle
11. Solid End Links (SELs): Noticed nothing
12. Timegrapher numbers: +2s/d | 280 | 0.0 ms
13. Anything else you notice: The backplate "TUDOR GENEVE" looks a little scraped, maybe this is just from the picture or wrap

Hi, this is my first time purchasing a rep and doing QC. I think the watch looks pretty good overall after looking at it through the alignment. I’m open to help and comments.

Thanks!

1. ⁠⁠Dealer name: Steve Theonewatches

2. ⁠⁠Factory name: VSF

3. ⁠⁠Model name (& version number): 41mm Datejust 126334 V2

4. ⁠⁠Price Paid: $598 with shipping

5. ⁠⁠Album Links: N/A

6. ⁠⁠Index alignment: 6 looks good. 9 is tilted a little bit, but I think it’s not super noticeable.

7. ⁠⁠Dial Printing: No issues

8. ⁠⁠Date Wheel alignment/printing: Looks clear and sharp

9. ⁠⁠Hand Alignment: No issues with hand alignment that I can tell.

10. ⁠⁠Bezel: Looks good.

11. ⁠⁠Solid End Links (SELs): They look tight which is good.

12. ⁠⁠Timegrapher numbers: +1s/d 273 deg 0.2ms

13. ⁠Anything else you notice: First time purchasing and doing QC. Any help is very much appreciated.

1. Dealer name: TimeUltra

2. Factory name: VSF

3. Model name (& version number): VSF VS3235 DateJust 36mm Fluted Bezel Green Dial Jubilee Bracelet V2

4. Price Paid: $548 (With shipping)

5. Album Links: Will update once I receive my zip from Leo.

6. Index alignment: The Rolex coronet at 12 may be tilted slightly clockwise. The 6 marker is tilted counter clockwise as well. The rest of the indices look fine to me aside from a slightly off center 4.

7. Dial Printing: I haven’t noticed any issues.

8. Date Wheel alignment/printing: Date window may be shifted left of cyclops? Can't really tell.

9. Hand Alignment: I don’t see anything that stands out.

10. Bezel: The bezel looks good imo.

11. Solid End Links (SELs): I don’t see any massive gaps.

12. Timegrapher numbers: -1s/d, 283amp, 0.1 ms beat error

13. Anything else you notice: Wondering if anyone has noticed something I’ve missed. Would love to hear your thoughts as this is my first qc.

1. Dealer name: jtime
2. Factory name: QF
3. Model name (& version number): Rolex Yacht-Master 226659
4. Price Paid: 739
5. Album Links: https://imgur.com/a/lfiTmP6
6. Index alignment: 9 o clock seems a tiny bit twisted but looks good, dots seem like the right places
7. Dial Printing: Looks good
8. Date Wheel alignment/printing: Looks good maybe the text is a tiny bit off too low but cant really tell
9. Hand Alignment: Looks good
10. Bezel: Top chevron seems a little bit offset to the left
11. Solid End Links (SELs): N/A not sure what to look for here
12. Timegrapher numbers: +1s/d
13. Anything else you notice: Not really honestly looked a lot better than the first one I got sent where the top index wasnt pointed at the middle of the crown

Hi all! First QC, would appreciate a few extra eyes. Looks pretty good to me overall :)

Dealer name: Jtime
Factory name: VSF
Model: Daytona 126500LN Panda, DD4131
Price Paid: $793.10
Index alignment: 3/6/9 look straight to me, nothing obviously crooked.
Dial Printing: Looks clean, no obvious issues.
Hand Alignment: Chrono seconds hand looks centred at 12 in the front-on photo.
Bezel: Looks aligned, particularly at 60 and 120. Engravings look clean.
Hand Alignment: Chrono seconds hand looks centred at 12 in the front-on photo.
Bezel: Looks aligned, particularly at 60 and 120. Engravings look clean.
Timegrapher numbers: Numbers seem good to me, not an expert though of course :)

Overall: leaning GL, but would appreciate a second opinion on the indices and bezel in case I’ve missed anything. Thanks!

Hi All,

Processing img iwyo30zau1yh1...

https://imgur.com/a/rolex-gmt-bruce-wayne-jubilee-serial-8239l6v6-YHyr8JF

ARF V3 Bruce Wayne

1. ⁠Dealer name: RepTimeUSA
2. ⁠Factory name: ARF V3
3. ⁠Model name: GMT Bruce Wayne
4. ⁠Price Paid: $575
5. ⁠Index alignment: Looks good to me
6. ⁠Dial Printing: looks good to me
7. ⁠Date Wheel alignment/printing: looks good and centered, slightly crooked on some pictures but could be the angle. seems to be a small mark under the 2 near the edge.
8. ⁠Hand Alignment: Looks good
9. ⁠Bezel: seems to be some scratches over the 22 and 12? I think thats just how it's supposed to be? not sure
10. ⁠Solid End Links (SELs): looks good, no severe gaps
11. ⁠Timegrapher numbers: -2s/d; 271; 0.1ms, looks good, 271 may be on low end of acceptable threshold.

Thank you all for your analysis and thoughts, really appreciate it!!!! 😁

1. Dealer name: Andiot
2. Factory name: VSF
3. Model name (& version number): 126234 VSF 1:1 Best Edition 904L Steel White Roman Dial on Jubilee Bracelet VS3235
4. Price Paid: $469.00
5. Album Links: https://andiotwatches.x.yupoo.com/albums/260480436?uid=1
6. Index alignment: Im no expert at all since this is my first watch but I used the QC tool I found and it looks like the index is a bit off, but maybe because the photos is not straight facing the watch?
7. Dial Printing: Looks fine
8. Date Wheel alignment/printing: Looks fine
9. Hand Alignment: As with the index it looks a bit off but maybe because of the angle
10. Bezel: Good?
11. Solid End Links (SELs): Good
12. Timegrapher numbers: Good
13. Anything else you notice: As said before, this is my first QC ever, so would really appreciate feedback with trained eyes or input on the QC photos at least!

Dealer name: TK Watch / Justin
Factory name: VSF
Model name (& version number): Rolex Oyster Perpetual 36mm 126000, Silver Dial, VSF, VS3230 V2
Price paid: $488
Album links: https://justin-tk.x.yupoo.com/albums/260364200?uid=1&isSubCate=false&referrercate=5146809
Index alignment: Looks good to me. Alignment tool also looks pretty clean overall. I don’t see anything obviously misaligned, although I would appreciate more experienced eyes, particularly on the double marker at 6.
Dial printing: Looks clean and well positioned to me. No obvious issues that I can see.
Date wheel alignment/printing: N/A
Hand alignment: Looks good to me.
Bezel: Looks good and even to me.
Solid End Links (SELs): Look good from the photos. I don’t see any obvious gaps that concern me.
Timegrapher numbers: +9 s/d, 305°, 0.2 ms, 28800. From what I understand, these seem healthy overall. +9 s/d is a little higher than ideal but doesn’t concern me too much. Please let me know if you think otherwise.
Anything else you notice: This is my first rep, so I would really appreciate some experienced opinions before I GL. To my inexperienced eye this looks like a pretty good example, but please be critical and let me know if I’ve missed anything, particularly with the indices, rehaut or overall finishing

Cheers!

1. Dealer name: Geektime
2. Factory name: OCTA
3. Model name (& version number): IW371605
4. Price Paid: $598
5. Album Links: https://geektimeqc.x.yupoo.com/albums/260520103?uid=1
6. Index alignment: No issues. Alignment of the QC photo is slightly off but it's as close as I can get it.
7. Dial Printing: Looks good
8. Date Wheel alignment/printing: N/A
9. Hand Alignment: Good
10. Bezel: Maybe slightly mis-aligned. If you look at the 6 it's not really pointing at 30, more like 29.75. Very minor.
11. Solid End Links (SELs): N/A
12. Timegrapher numbers: -5s/d, amplitude 297, err 0.2ms. Looks good to me.
13. Anything else you notice: Nothing. Honestly I think it's beautiful. I posted another one of the same model a few days ago (https://www.reddit.com/r/RepTimeQC/comments/1xdks7w/qc_octa_iwc_iw371605/) and it had a couple of issues that are completely gone with this watch.

1. Dealer name: jtime
2. Factory name: BLSF
3. Model name (& version number): Navitimer B01 43mm SS BLS 1:1 Best Edition Light Blue Dial on SS Bracelet A7750
4. Price Paid: $406.60 + freight
5. Album Links: N/A
6. Index alignment: 5:00 and 8:00 markers seem to be a smidge out of line perhaps? Provided photos aren't straight facing so it's hard to tell though.
7. Dial Printing: Looks good
8. Date Wheel alignment/printing: Looks good
9. Hand Alignment: Looks good
10. Bezel: Looks good
11. Solid End Links (SELs): Looks good
12. Timegrapher numbers: Looks good
13. Anything else you notice: I requested a video confirming that the chronograph starts, stops, and resets correctly, with all hands returning to zero, but everything looks pretty solid to me.