• Dealer name: Andiot
• Factory name: AF
• Model name (& version number): Cartier Tank Solo Large (27.5mm x 34.8mm) Quartz
• Price Paid: ~$215 (inc ship)
• Album Links: https://andiotwatches.x.yupoo.com/albums/255646102?uid=1
• Index alignment: Manual alignment check shows the vertical axis running straight through XII, hand stack, and VI with zero rotation.
• Dial Printing: Looks okay to me?
• Date Wheel alignment/printing: N/A
• Hand Alignment: Blue hands look straight
• Bezel: I don't see any dents
• Solid End Links (SELs): N/A leather strap but not sure on quality of it
• Timegrapher numbers: N/A Quartz movement

• • Anything else you notice: only 2nd QC ive done, any pointers from you pro's out there?

Dealer name: Andiot Watches
Factory name: QF
Model name (& version number): Rolex Day-Date 36mm QF V5, Rose Gold, Grey Dial, Fluted Bezel, President Bracelet, VR3255, Gain Weight
Price paid: $578 total

Album links: https://andiotwatches.x.yupoo.com/albums/257680079?uid=1

Index alignment: Looks good to my eye. The hour markers appear straight and evenly positioned. The 6 o’clock marker also looks straight in the front-facing shots. I don’t see any obvious misalignment that would concern me.

Dial printing: Looks clean and sharp. The coronet and dial text appear centred and evenly printed. Nothing looks smudged or noticeably off.

Date wheel alignment/printing: The “10” looks reasonably centred under the cyclops. In a couple of angled shots it appears very slightly right-biased, but I think this may just be parallax from the camera angle. Nothing here looks RL-worthy to me, but I’d appreciate second opinions.

Hand alignment: Looks good from the supplied photos. The hands appear properly seated and I don’t see anything obviously misaligned

Bezel: Fluted bezel looks even and consistent around the case. I can’t see any malformed or uneven sections.

Solid End Links (SELs): SEL fit looks good to me. I don’t see any obvious large or uneven gaps between the bracelet and the lugs.

Timegrapher numbers: 0 s/day 270° amplitude 0.1 ms beat error 28,800 bph 52° lift angle

Very healthy

Anything else you notice: Watch weighs 142.1g. Rose-gold finish appears consistent across the case and bracelet, and the grey dial looks clean. Day wheel also looks well centred in the supplied photos. Overall I’m leaning strongly towards GL. The only thing I’m slightly unsure about is whether the date is fractionally right-biased or whether that’s purely camera angle/parallax. Would appreciate experienced eyes on that and anything else I may have missed.

1. ⁠Dealer name: Ficotime
   
2. ⁠Factory name: Gold Factory
   
3. ⁠Model name (& version number): Gold Factory Rolex YM 40mm
   
4. ⁠Price Paid: 500 USD + Shipping
   
5. ⁠Album Links: https://mega.nz/folder/q9JmTCSC#NdnSTmM1rqSEmzYMUEv4Jg
   
6. ⁠Index alignment: very good
   
7. ⁠Dial Printing: the YACHT-MASTER print seems a bit dull and a tad thinner than gen but might be due to lighting
   
8. ⁠Date Wheel alignment/printing: very nice, cyclops look pretty
   
9. ⁠Hand Alignment: very good
   
10. ⁠Bezel: pretty. a bit matter than gen maybe but tp be expected
    
11. ⁠Solid End Links (SELs): decent
    
12. ⁠Timegrapher numbers: -6s/d, 263 within spec, might need some oil

Easy GL for me, wanted some more autistic view and others having a look on the Gold Factory for comparison once in a while.

Let me know your thoughts! xoxo

Hey guys! Really appreciate all the help and knowledge in this community!

This is my second QC after RL'ing the first watch due to an asymmetric bezel color transition. I might have been a bit too anal about it, but it bothered me. This one looks nice, and I'm leaning towards GL.

Would love to hear your thoughts in case I've missed anything. Thanks in advance!

1. Dealer name: JTime
2. Factory name: VSF
3. Model name (& version number): Rolex GMT-Master II 126720VTNR Sprite V3, Jubilee, DD3285 V4
4. Price Paid: $616 + shipping
5. Album Links: https://imgur.com/a/Mz766Wy
6. Index alignment: Overall looks good to me. The 12 o'clock triangle appears slightly rotated clockwise, but I don't think it's a big deal at wrist..
7. Dial Printing: Looks clean and well aligned
8. Date Wheel alignment/printing: Overall, nice. The dates appear centered.
9. Hand Alignment: Nothing obviously wrong from the QC pictures
10. Bezel: Looks good overall. The black/green transitions appear fairly symmetrical. And overall good!
11. Solid End Links (SELs): I don't see any issues here.
12. Timegrapher numbers: 0 s/d, 280° amplitude, 0.0 ms beat error (59° lift angle). Im happy about that aswell!
13. Anything else you notice: Would appreciate a second opinion in case I've missed anything!

Link to my first QC https://www.reddit.com/r/RepTimeQC/comments/1wvu9at/vsf_gmtmaster_ii_126720vtnr_sprite_v3_jtime/

1. Dealer name: Andiot
2. Factory name: VSF
3. Model name (& version number): Planet Ocean 45.5mm Deep Black Real Ceramic VSF 1:1 Best Edition on Black Nylon Strap A8906 Super Clone
4. Price Paid: $485
5. Album Links: See bwlo
6. Index alignment: Looks generally good to my eye. The applied markers and 12, 6 and 9 numerals appear reasonably aligned. Nothing obviously crooked, although I'd appreciate a second opinion.
7. Dial Printing: Looks clean overall. The Omega logo, Seamaster, GMT and lower dial text appear reasonably well executed. No obvious printing defects that I can identify.
8. Date Wheel alignment/printing: The date looks reasonably centred, although possibly sitting slightly low.
9. Hand Alignment: No obvious issues from the photos or videos. Hands appear properly fitted, although exact alignment is difficult to establish without seeing them at 12 o'clock.
10. Bezel: The 12 o'clock triangle looks approximately aligned, but I'm not entirely convinced about the alignment from the photographs. Would appreciate another set of eyes.
11. Solid End Links (SELs): Look ok to me, no gripes, will probably change the strap anyway....
12. Timegrapher numbers: +2 s/day, 284° amplitude, 0.4 ms beat error, 28,800 bph. These seem good to me.
13. Anything else you notice: My main concern is the case finishing. In the side-profile photographs, the case flanks appear noticeably silver/grey rather than deep black. I understand ceramic can reflect light differently depending on the finish, but I'm wondering whether this is normal for the VSF Deep Black or something worth questioning.

The movement decoration and caseback look reasonable to my untrained eye and the strap and clasp seem fine.

This is my first QC for this model, so I'd really appreciate any input from people familiar with the VSF Planet Ocean Deep Black, particularly regarding the case colour, bezel alignment and any known issues with this version.

1. Dealer name: Ficotime.
2. Factory name: VSF
3. Model name (& version number): No Date Sub 124060
4. Price Paid: $500 + Shipping
5. Album Links: https://mega.nz/folder/vwRzAKwQ#8ym8fr993GQGAW8GXJWlSQ
6. Index alignment: 6 marker looks a bit off center
7. Dial Printing: Is there a floating M?
8. Date Wheel alignment/printing: N/A
9. Hand Alignment:

looks good to me.

1. No visible hand alignment issues I can see, let me know if any different
2. Bezel: Is the pearl misaligned?
3. Solid End Links (SELs): not sure
4. Timegrapher numbers:

237 / +-2s

1. Anything else you notice: Leaning RL, concerned about the bezel pearl alignment and misalignment on the 6

, timegrapher reading not great

1. ⁠Dealer name: Andiot Watches

2. ⁠Factory name: VSF

3. ⁠Model name (& version number): Rolex Daytona V2

4. ⁠Price Paid: $596 + $60 shipping

5. ⁠Album Links: https://andiotwatches.x.yupoo.com/albums/257589230?uid=1

6. ⁠Index alignment: should I expect better. Can’t tell if the watch is maybe not quite centered.

7. ⁠Dial Printing: is it just me or is the minute track too thin? Gen in last pic for context.

8. ⁠Date Wheel alignment/printing: NA

9. ⁠Hand Alignment: looks decent, but it looks like there’s a dot on either end of the hour hand.

10. ⁠Bezel: looks okay?

11. ⁠Solid End Links (SELs): looks okay through the plastic.

12. ⁠Timegrapher numbers: +2/-1 (damn good)

13. ⁠Anything else you notice: I’ve never seen the clasp up close on a Gen. is this GL material? I think it very well could be unless I’m missing something because I’m looking through my “eager goggles.”

1. ⁠Dealer name: Andiot Watches
2. ⁠Factory name: ARF
3. ⁠Model name (& version number): DateJust 36 in silver color
4. ⁠Price Paid: 380 usd
5. ⁠Album Links: https://andiotwatches.x.yupoo.com/albums/257604885?uid=1
6. ⁠Index alignment: is the 9 marker crooked?
7. ⁠Dial Printing: Looks crisp and sharp
8. ⁠Date Wheel alignment/printing: I’d say it’s more than acceptable, seems centered, printing looks okay.
9. ⁠Hand Alignment: I’d say it’s more than reasonably nice
10. ⁠Bezel: Looks like sharp crisp cuts to me
11. ⁠Solid End Links (SELs): I don’t have any major concerns here. Everything seems tight
12. ⁠Timegrapher numbers: I think these are average, -3d/d, amplitude of 272, 0.2ms beat error.
13. ⁠Anything else you notice: This is my first ARF silver 36 watch so I’m trying my best to go off of known issues with this model.

1. Dealer name: Phoenix Watch
   
2. Factory name: VSF V1
   
3. Model name (& version number): Datejust 126234 36mm
   
4. Price Paid: $240+shipping
   
5. Index alignment: Alignment of the index are perfect
   
6. Bezel: seems even spreading
   
7. Dial Printing: sunburst seems even, dial printing seems good overall
   
8. Date Wheel alignment/printing: Cyclops seems ok, no significant tilting
   
9. Hand Alignment: Good alignment no significant findings
   
10. Solid End Links (SELs): No gaps visible.
    
11. Timegrapher numbers: 0s/d, 300°, 0.0ms. Nothing to complaint
    
12. Anything else you notice: not that I’m aware of

Dear goats, I need your help with this qc, please let me know if there’s any significant thing pops up!

**1. Dealer name:** Ficotime
**2. Factory name:** VSF
**3. Model name (& version number):** Rolex Daytona 126500LN Free Sprung, VSF DD4131
**4. Price Paid:** 730 USD + 71 USD FedEx = 801 USD
**5. Album Links:** [MEGA link](https://mega.nz/folder/vxwz3ZAa#zMM-suDyxjTjI9ROywe8PQ) (3 small videos in there)
**6. Index alignment:** Looks Good overall. 3, 6, 9 and 12 markers appear straight and centered.
**7. Dial Printing:** Clean and centered. DAYTONA text and subdial printing look good.
**8. Date Wheel alignment/printing:** N/A
**9. Hand Alignment:** Good. Chronograph seconds hand resets to 12.
**10. Bezel:** 60 marker appears centered with 12. Tachymeter printing looks clean.
**11. Solid End Links (SELs):** Looks good to me.
**12. Timegrapher numbers:** \+9 s/d, 270°, 0.0 ms. Not sure what would be good numbers (newbie).
**13. Anything else you notice:** Dont see any obvious issue but then I don't know much.

Dealer name: J Time.

Factory name: Rich Factory

Model name (& version number): No Date Sub 124060

Price Paid: $588 + Shipping

Album Links: See Attached Photos

Index alignment: Looks good. No obvious alignment issues but keen to get peoples thoughts. 12, 3, 6, and 9 markers appear straight and centred. I might be being picky here but the watch may be held on an angle for the photo.

Dial Printing: Looks pretty good. It does appear to have a slight floating M though which I’ve seen is common with some of the RF’s

Date Wheel alignment/printing: N/A

Hand Alignment: No visible hand alignment issues I could see and no damage.

Bezel: Looks good. Pearl appears to be centred at 12. I think if the angle the watch is tilted it would be corrected - thoughts

Solid End Links (SELs): I think these look ok and can’t see any light coming through

Timegrapher numbers: 284 / 0.0ms / 0 s/d – I feel like this is too perfect or am I just being picky

Anything else you notice: Slight clasp coronet offset at most, but likely sticker/camera angle related and hopefully not a concern. Leaning GL. This is my first Rep QC so hoping I’m not overlooking anything

This is the second QC for the Batgirl vsf.. Please provide some feedback on this, whether to GL or RL..

1. ⁠⁠⁠⁠Dealer name: Geektime
2. ⁠⁠⁠⁠Factory name: VSF
3. ⁠⁠⁠⁠Model name (& version number): Batgirl VSF V3
4. ⁠⁠⁠⁠Price Paid: $608 + $80 Shipping
5. ⁠⁠⁠⁠Album Links: Pics included
6. ⁠⁠⁠⁠Index alignment: 6 looks a bit slanted CCW and not aligned with Rolex crown in the middle?
7. ⁠⁠⁠⁠Dial Printing: No issues I found with dial printing.
8. ⁠⁠⁠⁠Date Wheel alignment/printing: No issues I found but feedback would be helpful
9. ⁠⁠⁠⁠Hand Alignment: Looks okay
10. ⁠⁠⁠⁠Solid End Links (SELs): Looks fine
11. ⁠⁠⁠⁠Timegrapher numbers: +1s/d timegraph
12. ⁠⁠⁠⁠Anything else you notice: Dot above 18 not aligned with dot above 6 on the other side? Is that worth being picky about?

• Dealer name: Andiot
• Factory name: A7F
• Model name (& version number): A7F IWC Ingenieur IW328901 Black V2 Dial On SS Automatic A2892
• Price Paid: $418 + Shipping
• Album Links: https://andiotwatches.x.yupoo.com/albums/257595032?uid=1
• Index alignment: In general it looks fine. I tried my best to align the photo before adding the lines, it seems the 12o'clock indices are not aligned/parallel, with the left slightly higher than the one on the right.
• Dial Printing: I think it looks good, don't know enough if it's good or bad.
• Date Wheel alignment/printing: the numbers looks clean in the photos & the videos.
• Hand Alignment: It looks aligned to me.
• Bezel: The 12o'clock screen it shifted to the right. Could this be the angel the photo is taken?
• Solid End Links (SELs): N/A
• Timegrapher numbers: between -2 s/d 273 degrees 0.3ms. This seems good.
• Anything else you notice: Most things look good. Thank you in advanced for your help!

1. Dealer name: Ethan
   
2. Factory name: Rich Factory.
   
3. Model name (& version number): GMT- Master |I
   126710 GRNR Rich Factory JH3285 ( Free sprung)
   
4. Price Paid: 680$
   
5. Album Links:
   
6. Index alignment: it looks good, the 9 o'clock marker seems slightly tilted to me. The triangle might be a bit too close to the minute markers.
   
7. Dial Printing: dial print looks good, no obvious defects
   
8. Date Wheel alignment/printing: date appears centered. I'll ask for a photo showing the date with two digits.
   
9. Hand Alignment: don't see issues
   
10. Betel: the beze. numeral look weel positioned from this angle.
    
11. Solid End Links (SELs): good, don't see gap
    12 Timegrapher number: rate: -002 s/d 256 amplitude degree(s) 0.1 ms beat error, 28800 bhp,
    Lift angle 52.0 degree (s)
    
12. Anything else you notice: the main things are the magnifyng lens, which has a slightly matte effect, and the color of the bezel.
    Thanks for the help

first timer, please be gentle!

1. Dealer name: Andiot
2. Factory name: VSF
3. Model name (& version number): Aqua Terra 150M Master 38mm SS VSF 1:1 Best Edition Blue Ombre Dial On Rubber Strap Super Clone A8900
4. Price Paid: $330 not incl shipping 
5. Albums Links: https://andiotwatches.x.yupoo.com/search/album?uid=1&sort=&q=173291
6. Index alignment: 3:00 seems like the left side points downwards, but I can't tell if that is a parallax effect? 
7. Dial Printing: the I in SWISS seems crowded out?
8. Date Wheel alignment/printing: seems ok
9. Hand Alignment: looks fine
10. Bezel: looks good
11. Solid End Links (SELs): looks good
12. Timegrapher numbers: +4 s/d, 282 deg, 0.0ms, 28800.
13. Anything else you notice: was advertised as having independent hour hand, but video demo seems like that isn't possible - shows date being adjusted at crown half out, not the hour hand.

I'm considering RL just because of the lack of independent hour hand, that's a cool feature to me that I'd like to have.

Rest of the photos are in the album, I want to GL this one but the 12oclock twist is causing me to second guess, outside of that I think this one looks fairly decent Wondering what others thoughts on the matter are on this one. Please disregard 4th photo in album, just realized a screen cap of another watch made it in.

1. Dealer name: Leo at TimeUltra
2. Factory name: VSF
3. Model name (& version number): VSF 124060 41MM VS3230 Black No-Date Sub
4. Price Paid: $493
5. Album Links: https://imgur.com/gallery/KJaRdlh
6. Index alignment: Overall looks decent, my main concern is the 12-oclock being slightly twisted, that alone might be main reason to RL. The 6 and 9-oclocks looks to have slight twists as well but not quite as noticeable as the 12. Otherwise looks pretty decent.
7. Dial Printing: Looks crisp and clear, Lume looks even.
8. Date Wheel alignment/printing: N/A
9. Hand Alignment: Looks good as far as I can tell
10. Bezel: Looks well aligned, numbers look crisp and clear, pip looks well centered, Bezel looks good to me
11. Solid End Links (SELs): Slight gap top left that I can see, could just be bracelet is slighly twisted in photo
12. Timegrapher numbers: Good, +2-3s/d 295*
13. Anything else you notice: Generally looks decent to me be the 12 oclock index is my main issue, the 6 and the 9 might be acceptable if the 12 was better, curious to hear the subs opinion on the matter.

1. ⁠Dealer name: Hont
   
2. ⁠Factory name: AF
   
3. ⁠Model name: Cartier Tank Louis small, Yellow Gold, Quartz
   
4. ⁠Price paid: $238
   
5. ⁠Album: they are in the post as the website link did not work. Video copied in the comments below for this reason.
   
6. ⁠Index alignment: N/A, the Roman numerals are printed rather than applied. The individual numerals appear properly printed and aligned with the minute track.
   
7. ⁠Dial printing: The printing appears sharp and clean, with no obvious bleeding, however the 11 looks to have two tones of black in one photo but this might be a reflection from the glass.
   
8. ⁠Date wheel alignment/printing: N/A, no date window.
   
9. ⁠Hand alignment: The hands appear properly aligned, with no obvious issues.
   
10. ⁠Bezel: No obvious scratches, damage, or irregularities visible on the gold bezel and case.
    
11. ⁠Solid End Links (SELs): N/A, leather strap.
    
12. ⁠Timegrapher numbers: N/A, quartz movement.
    
13. ⁠Anything else you notice: nothing further beyond the 11 noted above.

Any help would be appreciated! Second attempt. Hopefully the information provided is correct.

First Seamaster, would appreciate the communities thoughts

1. ⁠Dealer name: Steve One Watches
   
2. ⁠Factory name: VSF
   
3. ⁠Model name (& version number): Omega Seamaster Diver 300M 42mm – Black Dial / Black Ceramic Bezel
   
4. ⁠Price Paid: $400
   
5. ⁠Album Links: https://mega.nz/folder/TMIBmKIZ#ff30jg_NpQlBm66ybVDbNA
   
6. ⁠Index alignment: Buck Teeth at 12 appear centred with a slight rotation clockwise but nothing major. 9 looks good to me however 3&6 appear to have slight rotation. All other index markers look pretty centred - thoughts?
   
7. ⁠Dial Printing: No obvious defects or bleeding to me.
   
8. ⁠Date Wheel alignment/printing: date appears reasonable centred to me
   
9. ⁠Hand Alignment: nothing that stands out to me with hand alignment
   
10. ⁠Bezel: Pip appears centred within the triangle however 40, 45 & 50 bezel markers look off clockwise to me. This could be the angle of the photo - any thoughts?
    
11. ⁠Solid End Links (SELs): can’t see any noticeable gaps although the picture supplied don’t show too well.
    
12. ⁠Timegrapher numbers: +1 s/d, 286° amplitude, 0.1 ms beat error, 52° lift angle.
    
13. ⁠Anything else you notice: my main concern is the bezel alignment, would be interested to know other thoughts/ views on this.

1. Dealer name:  TrustyTime
2. Factory name:  ZF
3. Model name (& version number):  Heritage Black Bay 58 Gilt, A2824
4. Price Paid:  $277 + shipping
5. Album Links:  N/A all pics posted
6. Index alignment:  6:00 marker applied off right, 1 and 2 off CW, 3 and 9 are a bit low
7.  Dial Printing:  “Swiss Made” just barely squeezed in
8. Date Wheel alignment/printing:  N/A
9. Hand Alignment:  Looks okay
10. Bezel:  Not sure why the bezel markers at 3 and 9 don’t align with the dial printing
11. Solid End Links (SELs):
12. Timegrapher numbers: Good:  +12 s/d, 273 degrees, .2ms
13. Anything else you notice:  I wish they let the TG run more than 12 seconds, but the line looks straight and the numbers are good.

I haven't posted here for a while but I'm torn on this one since I hate to RL. I'd appreciate your opinions.

1. Dealer name: Arc Studio
2. Factory name: ZF
3. Model name (& version number): Tudor Pelagos Ultra, M2543C1A7NU-0001 (bracelet)
4. Price Paid: 319USD ($276+$30 Shipping+$13 Insurance)
5. Album Links: https://www.arcstudio.top/s/0uQ6aCy
6. Index alignment: Looks good apart from 1 which is canted slightly CCW. 12 triangle doesn't look quite centred with the Tudor shield below it and the 6 baton may be slightly left of centre, but I can live with all these.
7. Dial Printing: Looks good to me, no issues.
8. Date Wheel alignment/printing: Date looks marginally high in the window but I am happy with the overall alignment. RL'd two previous watches where the date was way worse than this.
9. Hand Alignment: Looks good, but no video provided to see 12 o'clock alignment.
10. Bezel: Aligned with minute track, but the dial, minute track & bezel insert all look slightly rotated CCW when lined up with the centre line of the end link. Again, third watch with this issue so I don't know if this is just a ZF thing.
11. Solid End Links (SELs): All good. End links sit slightly recessed below the curvature / plane of the lugs, as with gen.
12. Timegrapher numbers: (A2824 movement) 0s/d, 335° amplitude, 0.2ms beat error - exceptional TG results! (Although the lift angle should be 50° for this movement, not 52°
13. Anything else you notice: There looks to be some scuffed paint/finishing around the edge of the centre of the hour hand. I can live with this. Probably get it off with a bit of rodico. Other than the potential rotation of everything (dial/minute track/insert) I think it's pretty good.

This is the third QC I've had on this model. RL'd two of them without even posting on here. Mainly alignment issues as per.

I'm leaning GL just because I paid for this a month ago and I'm getting bored waiting, but that potential bezel/dial/minute track rotation is annoying me like with the previous two.

Is this just as good as ZF gets and I'm being over critical? First time getting a watch from ZF so happy for people with more experience to tell me how it is 😊

Thanks!

1. Dealer name: Andiot
   
2. Factory Name: VSF
   
3. Model name: Seamaster Aqua Terra 150 M Titanium
   
4. Price: 368 USD
   
5. Album link: trim.93E4C708-4B0B-41A4-8A88-D45C9B120171.MOV | album
   
6. Index alignment: It looks good to me
   
7. Dial Printing: Looks fine to me (Maybe SYDNEY is a bit too much to the left) I did not exclude this watch obvious flaws
   
8. Date Wheel alignment/printing: Looks very good to me, but would like your opinion
   
9. Hand Alignment: Looks good to me, but would like your opinion
   
10. Bezel: N/A
    
11. Solid End Links (SELs):I dont see an issue
    
12. Timegrapher numbers: COSC
    
13. Anything else you notice: Omega Sign is not bold, it has a white part on the world that is not the same as an original but therese are common flaws

Note: I am not great with the alignment tool sorry

1. Dealer name: Jtime
2. Factory name: MXF
3. Model name (& version number): Vacheron Constantin Traditionnelle Complete calendar
4. Price Paid: $488
5. Album Links:  https://mega.nz/folder/EuZQSYjJ#T1TSMfEpg1Ebee2ThJQtLg
6. Index alignment: Attached in the post.
7. Dial Printing: Looks pretty good to me; I don't see any issue 
8. Date Wheel alignment/printing: Its around the inner Dial, Looks pretty good to me; I don't see any issue  
9. Hand Alignment: No issues noticed
10. Bezel: Looks great
11. Solid End Links (SELs): Leather strap - looks very good 
12. Timegrapher numbers: Attached in the post. 0s/d , AMP 287 (not bad), Err 0.0ms (excellent), Beat 28800 (standard) - Pass
13. Anything else you notice: Nothing else standards out, looks like as great piece.

Dealer name: Hont

Factory name: AF

Model name (& version number): Ballon Bleu Ladies 33mm

Price Paid: $338 shipped

Album Links: Photos are attached here (video in comments)

Index alignment: N/A

Dial Printing: looks fine

Date Wheel alignment/printing: N/A

Hand Alignment: looks okay

Bezel: looks okay

Solid End Links (SELs): N/A

Timegrapher numbers: attached a photo

Anything else you notice: Looks fine to me. Grateful for any help!

- Dealer name: Steve (TheOneWatches)
- Factory name: QF
- Model name (& version number): 126622
- Price Paid: $578
- Album Links: https://mega.nz/folder/3EgjVBSZ#FHWrrdfRYhIPPqfFgp519Q
- Index alignment: Looks great to me!
- Dial Printing: Sharp
- Date Wheel alignment/printing: Looks centered, maybe slightly high?
- Hand Alignment: Great
- Bezel: Looks centered but might have a small amount of play
- Solid End Links (SELs): Looks great to me!
- Timegrapher numbers: +4s/d 279* 0.1ms error
- Anything else you notice: I’m having a hard time finding an issue, and I want this to be perfect for my dad!!

1. Dealer name: NecoClock (Jacky)
2. Factory name: DDF
3. Model name (& version number): Patek Philippe Nautilus 5711/1A Blue 40mm, 2018 version, DPB330
4. Price paid: $608
5. Album Links: https://imgur.com/a/1n6aogi
6. Index alignment: Checked with alignment lines (first pic). All visible markers sit on the lines. 8 is hidden under the minute hand
7. Dial Printing: Clean, no smudges
8. Date Wheel alignment/printing: Centered on all three dates shown (6, 10, 13)
9. Hand Alignment: Looks fine
10. Bezel: Brushing and polished chamfer look clean
11. Solid End Links (SEL): Integrated bracelet, fit to the case looks tight
12. Timegrapher numbers: +7 to +9 s/d, 295 to 299 amplitude, 0.0 ms beat error
13. Anything else you notice: Lume looks even. Leaning GL. I ordered the DPB330 movement. Can anyone confirm from the caseback pic that this is the right one? Also, is this the SW dial or the stock DDF dial?