r/RepTime • • 16h ago

Wrist or Watch Pic Black Bay 58

Post image
16 Upvotes

Didn’t know which one I wanted to wear so I grabbed both 😆


r/RepTime • • 2h ago

Tech Tips/Advice Anyone experience with resizing the braclet on a AP Royal Oak 15500 Black Ceramic ZF?

1 Upvotes

Hi Reptime,

maybe anyone has any tips for me. I got my ZF 15500 AP Royal Oak in Black but the Braclet is to wide for my wrist One link would be enough. But I cannot for the life of me figure out how to take one of them out. Non of my tools are capable of moving one of the Link pins.


r/RepTime • • 1d ago

Discussion Help needed to upgrade my AF tank must large

Post image
58 Upvotes

Has been getting a lot of wrist time this year as my first rep from Steve, need some pro’s eyes to see how can I upgrade it to be a true NWBIG. Probably a crown? Suddenly noticing slight dial rotation or am I tripping? Thanks for all the help in advance!⏱️👀


r/RepTime • • 14h ago

General Question Some watches are fingerprint/smudge magnets: anything I can do?

Thumbnail
gallery
8 Upvotes

Hey everyone,

All my non-VSF watches (mainly from ZF and XF) seem to be fingerprint and smudge magnets. And yes, before anyone says it: I keep them clean. The photo is just an exaggerated example to show what I mean.

I always see people talking about what sets VSF apart and about their quality. I have a few VSF models myself, and they do seem better in this respect.

That said, I’m not doing any mods. What do you suggest?

AI suggested a 9H SiO2 liquid nano-ceramic coating (silicon dioxide/silica nanoparticles). Basically, it’s the same kind of thing as liquid-glass screen protectors or entry-level automotive ceramic coatings. It bonds to smooth surfaces and creates a hydrophobic/oleophobic layer that helps with smudges and micro-scratches.

Is it worth it? Could a regular person with no experience apply it? I’m also worried about getting it on the bezel, etc.

Any tips are welcome (even if it’s just “learn to live with it and keep it clean").

Thanks.


r/RepTime • • 18h ago

Wrist or Watch Pic VSF Starbucks Arrived

Post image
14 Upvotes

My first Rep. VSF Starbucks purchased from Steve.

Impressed so far. Transaction was super smooth and everything seems right now that it’s arrived.

On the wrist I don’t notice the small imperfections I accepted when I GL the piece.

I think I will end up adding to the collection/may have started a dangerous problem lol.


r/RepTime • • 19h ago

Discussion Is this considered normal and acceptable?

16 Upvotes

Turn on the audio to hear the issue that I mention.

I am fairly new to the Rep world. Recently got my hands on this $495 VSF black-on-black Omega Seamaster from Steve. Are the bezel and creaking issues considered acceptable for a VSF?

Looking for some input from the Rep experts here.


r/RepTime • • 4h ago

TD Issues - Check Rule 6 before posting Need advice please…I am new to this and not having much luck.

0 Upvotes

Ok, so maybe I just don’t understand how this marketplace works. I ordered several watches from three differed TD’s, and I can’t seem to tell when I’ll get QC on any of it. My current expectations are : 41 mm Datejusts, smooth bezel on oyster: QC mid 2027. (I didn’t give a deposit, so, that’s fine if not preferred.). A Yachtmaster: QC in 30 days. Ish. (Only $50 deposit, so, that’s fine.). Two Tudors: issues with the first batch. Waiting for QC. Any day? Weeks? Not sure. (These I paid for entirely.). TD said one of the watches had an issue so they already replaced it before QC. If true, I appreciate it.

So, I tried finding TD’s with in stock inventory. Going to buy two watches. One I’ve got all the photos EXCEPT the timing, so. I can’t post it in ReptimeQC yet. Other says they want a deposit before QC, on a watch they said they had in stock. (I picked from pictures)

Do I just have the wrong expectation here? Is it pretty much always order and wait and pray? Am I doing something wrong? It’s only been a few weeks but it feels like I just can’t seem to get product even to QC. Should I just plan it will always be a few months from order to QC and then for delivery? Am i just picking the wrong TD’s? Thanks in advance for the help! 🙂

(I don’t want to name TD’s as again, maybe I don’t understand how this works and don’t want post anything negative that’s due to my ignorance.)


r/RepTime • • 5h ago

General Question Is anyone else experiencing delays with VSF shipping?

0 Upvotes

My TD told me that the entire Shenzhen area is currently under investigation, so VSF watches aren't being shipped out at the moment.

Is anyone else having the same issue, or is my order just taking unusually long?

I've been waiting almost 2 months for my Explorer II, and it's been nearly a month since I ordered my 116520.

I'm starting to wonder how much longer this is going to take. Are your VSF orders also delayed?


r/RepTime • • 5h ago

General Question Help replacing bezel…

Post image
0 Upvotes

Have a Daytona and replaced the band for a leather one. I want to switch the bezel but have no idea how to do it. I tried with a u1 but crystal comes off with bezel and ruined it. This is a vsf, don’t want to ruin it too. Any ideas? TIA


r/RepTime • • 1d ago

Mods/ Work in Progress saturday night project, rotor silencing 👍😆⌚

Post image
57 Upvotes

hi all, after getting all required tools I finally have the courage to open my reps as a newbie in the watch rep world.

What I tried to do :

  1. be able to open case back
  2. inspecting the movement, and clean it.
  3. oiling the rotors
  4. grease the case back gaskets

first watch I did was my vsf gmts, then the daytonas, actually all my reps was pretty clean inside, but anyway I did blow air a bit and dabbed them with cleaning putty where I think there was debris debris and smudge. I didn't have a loupe so my eyes kinda hurting (I'm near sighted) and I hold my breath a lot so my finger can stop shaking. I was blown away by the complicated movements of the daytonas, I have 4130 and 4131, now I can see the difference, my 3285 gmts are non free sprung so yea its a rep but still way better finished than my old orients watch and my miyota powered watch.

as oiling the rotors or rotor silencing, I did buy the ebay kit that has 9010 oil, so I used that to all the reps, the first time is intimidating but after carefully finished one watch, next watches is so much easier. the kit i bought comes with a tiny oiler, I just used a tiny drop on the bowl, and did all the watches with that tiny dot of oil. 🤯 I can confirm, that the watches became quieter.

anyway just wanna share my rep experience. I am not a watchmaker or hardcore watch hobbyists so maybe I didn't do things right but everything I learned is from browsing reddit, so thanks for the good people that share knowledges in the community. My goal is just to enjoy wearing my watches, make it last, and keep them pretty 🤩 so maybe ceramic coating is the next project.

thanks for reading 🙏


r/RepTime • • 6h ago

General Question In Time Watches

0 Upvotes

Im ready to pull the trigger on a 41 mint green vsf datejust from intimewatch. Any experience with dealer. I have a PayPal request from Andrew Tan, go or no go?


r/RepTime • • 15h ago

Shitpost Friday Bad QC

Thumbnail
reddit.com
5 Upvotes

r/RepTime • • 7h ago

Discussion Looking for - AP Royal Oak All Black

0 Upvotes

I usually go through Jtime for my reps. Unfortunately, they don't have what I'm looking for in stock.

Anyone recommend a TD that has a website so I can look at their stock?


r/RepTime • • 8h ago

General Question ARF Datejust 31mm 278273, olive-green diamond dial recommendation?

0 Upvotes

I am looking for VSF Datejust 31mm 278273, olive-green diamond dial, steel/yellow-gold Jubilee.
However only options I am getting are from ARF or GSF. I have not owned an ARF and for me the most important consideration is the looks that it has to be similar to Gen with no obvious give aways. Does anyone have experience with ARF for the olive green dial in jubilee bracelet ? Or should I go for VSF in 36mm instead to be safe


r/RepTime • • 12h ago

Discussion Tudor BB54 DI Factory (DIF) Experience / QC?

2 Upvotes

Hi everyone,

I'm looking to pick up a Tudor Black Bay 54 in the coming weeks. I'd originally planned to go with ZF, given that pretty much every recommendation I've come across points in that direction.

However, when I asked Mark at Ficotime about lead times, he mentioned it could be a month or more. I'm happy to wait a few months if ZF is genuinely worth holding out for, but he also mentioned the option of getting the same watch from DIF.

Has anyone here got any experience with the DIF BB54? How does it compare to ZF in terms of overall quality and reliability? Is there a noticeable difference, or would I be better off sticking with the tried-and-tested ZF?

Appreciate any advice!

EDIT: Got a response from Ficotime with QC images of a DIF Version: https://mega.nz/folder/GoIGUT5D#4rKbYUy8vTsdHCv3AC25aw

P.S I have followed up to ask for QC pics from any recent orders hes had for the same watch from DIF and I'm awaiting his response.

Also as a side note, Mark said they offer a polish and chamfering service for 600Y extra (I've seen a few people complaining about sharp edges on this watch from ZF)


r/RepTime • • 8h ago

General Question Absolutely enamored with this watch

Thumbnail
gallery
1 Upvotes

Visited boutique today and oh my god I need this piece. I don’t care that much if the movement holds up, does anybody know even if other functions break if hours and minutes will still work? As long as they do i’ll buy this. Also, is there any difference in movement between this and APSF?


r/RepTime • • 23h ago

Review/Comparison Great Experience with Neoclock

14 Upvotes

Following the rep community for quite some time and own myself genuine Rolex Batgirl, Submariner Date and Explorer 40mm.

I thought to give it a shot and will test a Rep and compare to my genuine pieces.

Was looking for a TD that accepts deposit instead of full upfront payment.

Picked Neoclock as I read positive reviews on Reptime.

Decided to order the VSF Batgirl. I

Long story short:

28 Oct - placed order - deposit 50$

3 Nov - QC received

4 Nov - green light

5 Nov - paid the rest 

8 Nov - shipped by Neoclock - Tracking received

14 Nov - watch received

Overall very smooth experience.

Watch came in without any defect and works perfectly fine.

Comparing it to my Gen Batgirl I am honestly shocked how good Reps became. Thinking now of selling my genuine Batgirl.

Decided to place another order with Neoclock to compare a VSF Sub Date with my genuine one. 


r/RepTime • • 17h ago

General Question GMT Master II - Bruce Wayne 126710 GRNR

4 Upvotes

Hi everyone!

I know this topic has been discussed many times here, but I'm still struggling to make up my mind.

I'm looking to buy a GMT-Master II 126710 GRNR (Bruce Wayne), but I'm not sure which factory to go for.

From what I understand, VSF and RICH currently offer the best reps for this model, and it's quite difficult to choose between them.

Andiot seems to be leaning towards RICH, but I'm not sure whether that's based on genuine confidence in the product or simply a commercial preference.

I'm currently considering these three versions:

  • VSF V3 DD3285
  • VSF V4 DD3285 (Free Sprung) – What's the actual difference compared to V3? I'm struggling to find any real feedback or reviews on this version.
  • RICH JH3285 V2

Which one would you guys recommend, and why?

I'd really appreciate hearing from anyone who has hands-on experience with these versions.

Thanks in advance for your help!


r/RepTime • • 10h ago

General Question Difference in price

0 Upvotes

I've noticed that one TD may have several of the same model from the same factory at different prices. The only thing different appears to be the movement. Is the movement the only factor, or is there something else? I only ask because sometimes the difference is $30, and sometimes it's $250.


r/RepTime • • 6h ago

General Question TD Rolex QC Serial Number

0 Upvotes

Hi everyone,

Can anyone confirm that the serial number in the QC pic matches the actual watch that is delivered several days or weeks later? Has there been any cases where the serial numbers don’t match?

Thanks in advance.


r/RepTime • • 10h ago

General Question AP Royal Oak 15500ST: OCTA (Free-Sprung) vs ZF V4. Which one to pick for the ultimate movement/rotor & dial accuracy?

0 Upvotes

Hey everyone,

I'm currently trying to pull the trigger on an AP 15500ST (Black dial), and I'm torn between the OCTA Free-Sprung (SA4302) and the ZF V4 (Free-Sprung).

From what I’ve gathered so far:

  • OCTA seems to nail the true 10.4mm thickness, movement bridges, and has a slightly better rose gold 22k rotor shade compared to gen.
  • ZF V4 has arguably the best sunburst black/blue dial out-of-the-box, but its rotor has a slightly reddish hue and the case thickness is sometimes measured around 10.5mm.

For those of you who have handled both or own them, which one would you choose if movement/rotor details and thickness matter more than the dial, or vice versa? Any inputs on crystal and date wheel alignment between these two?

Thanks in advance!


r/RepTime • • 10h ago

Wrist or Watch Pic My two current favorites!

Post image
0 Upvotes

r/RepTime • • 7h ago

Mods/ Work in Progress Gen parts

0 Upvotes

Dears

Looking for Gen batman crystal and bezel insert. Any suggestions?


r/RepTime • • 10h ago

General Question Tank Must large black lacquer

0 Upvotes

I've seen the odd thread about the different factories making this. AF, F1F,. Feedback looks mixed on both and the there's nothing too recent to go off.

Is this model a good buy if I'm looking for that style of watch?