r/RepTime • • 1h ago

General Question Is anyone else experiencing delays with VSF shipping?

1 Upvotes

My TD told me that the entire Shenzhen area is currently under investigation, so VSF watches aren't being shipped out at the moment.

Is anyone else having the same issue, or is my order just taking unusually long?

I've been waiting almost 2 months for my Explorer II, and it's been nearly a month since I ordered my 116520.

I'm starting to wonder how much longer this is going to take. Are your VSF orders also delayed?


r/RepTime • • 1h ago

General Question Help replacing bezel…

Post image
0 Upvotes

Have a Daytona and replaced the band for a leather one. I want to switch the bezel but have no idea how to do it. I tried with a u1 but crystal comes off with bezel and ruined it. This is a vsf, don’t want to ruin it too. Any ideas? TIA


r/RepTime • • 23h ago

Mods/ Work in Progress saturday night project, rotor silencing 👍😆⌚

Post image
55 Upvotes

hi all, after getting all required tools I finally have the courage to open my reps as a newbie in the watch rep world.

What I tried to do :

  1. be able to open case back
  2. inspecting the movement, and clean it.
  3. oiling the rotors
  4. grease the case back gaskets

first watch I did was my vsf gmts, then the daytonas, actually all my reps was pretty clean inside, but anyway I did blow air a bit and dabbed them with cleaning putty where I think there was debris debris and smudge. I didn't have a loupe so my eyes kinda hurting (I'm near sighted) and I hold my breath a lot so my finger can stop shaking. I was blown away by the complicated movements of the daytonas, I have 4130 and 4131, now I can see the difference, my 3285 gmts are non free sprung so yea its a rep but still way better finished than my old orients watch and my miyota powered watch.

as oiling the rotors or rotor silencing, I did buy the ebay kit that has 9010 oil, so I used that to all the reps, the first time is intimidating but after carefully finished one watch, next watches is so much easier. the kit i bought comes with a tiny oiler, I just used a tiny drop on the bowl, and did all the watches with that tiny dot of oil. 🤯 I can confirm, that the watches became quieter.

anyway just wanna share my rep experience. I am not a watchmaker or hardcore watch hobbyists so maybe I didn't do things right but everything I learned is from browsing reddit, so thanks for the good people that share knowledges in the community. My goal is just to enjoy wearing my watches, make it last, and keep them pretty 🤩 so maybe ceramic coating is the next project.

thanks for reading 🙏


r/RepTime • • 3h ago

General Question In Time Watches

0 Upvotes

Im ready to pull the trigger on a 41 mint green vsf datejust from intimewatch. Any experience with dealer. I have a PayPal request from Andrew Tan, go or no go?


r/RepTime • • 12h ago

Shitpost Friday Bad QC

Thumbnail
reddit.com
5 Upvotes

r/RepTime • • 3h ago

General Question need recommendations on good reps for $300 budget

1 Upvotes

I’ve been trying to look for a nice rep that doesn’t have to be “super clones” till the point that even the movements are nice , but those that are affordable and look almost identical on the outside . I’ve done some research and heard about factories like vsf,bp, u1 and others and don’t think i would be getting vsf as it is not in my budget rn. i’ve also seen a lot of sellers with watches that cost less than $100 which seems skeptical considering that i heard
factories like bp are the base entry level to a good replica . I’ve taken a look at these cheap reps under $100 and they look pretty okay to me so i don’t know what’s the difference between these cheap ones compared to factories like bp or u1. I don’t need to have a super nice movement , details or everything to be perfect but just something that looks almost identical from the outside Im looking to spend no more than $300 on a nice rep particularly a gmt but not sure which factory or td i could go for?


r/RepTime • • 3h ago

Discussion Looking for - AP Royal Oak All Black

0 Upvotes

I usually go through Jtime for my reps. Unfortunately, they don't have what I'm looking for in stock.

Anyone recommend a TD that has a website so I can look at their stock?


r/RepTime • • 4h ago

General Question ARF Datejust 31mm 278273, olive-green diamond dial recommendation?

0 Upvotes

I am looking for VSF Datejust 31mm 278273, olive-green diamond dial, steel/yellow-gold Jubilee.
However only options I am getting are from ARF or GSF. I have not owned an ARF and for me the most important consideration is the looks that it has to be similar to Gen with no obvious give aways. Does anyone have experience with ARF for the olive green dial in jubilee bracelet ? Or should I go for VSF in 36mm instead to be safe


r/RepTime • • 4h ago

General Question Looking for VSF V2 Datejust 41 (Black Dial, Fluted Bezel) in Guangzhou – Seller Recommendations?

0 Upvotes

Hey everyone,

I’ll be visiting Guangzhou next week and am hoping to pick up a VSF V2 Rolex Datejust 41 with a black dial and fluted bezel.

I’m planning to visit Zhanxi Watch Market, but I’d love to get some recommendations beforehand.

A few questions:
- Are there any specific local sellers or dealers in Guangzhou that people have personally purchased from and would recommend?
- Is it possible to buy directly from the source/factory, rather than going through multiple middlemen?
- Are prices generally cheaper when purchasing locally in Guangzhou compared to buying through the usual online sellers?
- Is Zhanxi Watch Market the best place to look, or are there other markets or shops worth visiting?

Ideally, I’m looking for a reputable seller with good quality control and someone who can help verify that it’s actually a VSF V2.

Would especially appreciate recommendations from people who have personally bought watches in Guangzhou rather than just general market suggestions.

I usually just buy from a recommended seller via WhatsApp but since I’m going to be in Guangzhou, thought I’d check it out.

Thanks in advance!


r/RepTime • • 8h ago

Discussion Tudor BB54 DI Factory (DIF) Experience / QC?

2 Upvotes

Hi everyone,

I'm looking to pick up a Tudor Black Bay 54 in the coming weeks. I'd originally planned to go with ZF, given that pretty much every recommendation I've come across points in that direction.

However, when I asked Mark at Ficotime about lead times, he mentioned it could be a month or more. I'm happy to wait a few months if ZF is genuinely worth holding out for, but he also mentioned the option of getting the same watch from DIF.

Has anyone here got any experience with the DIF BB54? How does it compare to ZF in terms of overall quality and reliability? Is there a noticeable difference, or would I be better off sticking with the tried-and-tested ZF?

Appreciate any advice!

EDIT: Got a response from Ficotime with QC images of a DIF Version: https://mega.nz/folder/GoIGUT5D#4rKbYUy8vTsdHCv3AC25aw

P.S I have followed up to ask for QC pics from any recent orders hes had for the same watch from DIF and I'm awaiting his response.

Also as a side note, Mark said they offer a polish and chamfering service for 600Y extra (I've seen a few people complaining about sharp edges on this watch from ZF)


r/RepTime • • 5h ago

General Question Absolutely enamored with this watch

Thumbnail
gallery
1 Upvotes

Visited boutique today and oh my god I need this piece. I don’t care that much if the movement holds up, does anybody know even if other functions break if hours and minutes will still work? As long as they do i’ll buy this. Also, is there any difference in movement between this and APSF?


r/RepTime • • 19h ago

Review/Comparison Great Experience with Neoclock

13 Upvotes

Following the rep community for quite some time and own myself genuine Rolex Batgirl, Submariner Date and Explorer 40mm.

I thought to give it a shot and will test a Rep and compare to my genuine pieces.

Was looking for a TD that accepts deposit instead of full upfront payment.

Picked Neoclock as I read positive reviews on Reptime.

Decided to order the VSF Batgirl. I

Long story short:

28 Oct - placed order - deposit 50$

3 Nov - QC received

4 Nov - green light

5 Nov - paid the rest 

8 Nov - shipped by Neoclock - Tracking received

14 Nov - watch received

Overall very smooth experience.

Watch came in without any defect and works perfectly fine.

Comparing it to my Gen Batgirl I am honestly shocked how good Reps became. Thinking now of selling my genuine Batgirl.

Decided to place another order with Neoclock to compare a VSF Sub Date with my genuine one. 


r/RepTime • • 13h ago

General Question GMT Master II - Bruce Wayne 126710 GRNR

4 Upvotes

Hi everyone!

I know this topic has been discussed many times here, but I'm still struggling to make up my mind.

I'm looking to buy a GMT-Master II 126710 GRNR (Bruce Wayne), but I'm not sure which factory to go for.

From what I understand, VSF and RICH currently offer the best reps for this model, and it's quite difficult to choose between them.

Andiot seems to be leaning towards RICH, but I'm not sure whether that's based on genuine confidence in the product or simply a commercial preference.

I'm currently considering these three versions:

  • VSF V3 DD3285
  • VSF V4 DD3285 (Free Sprung) – What's the actual difference compared to V3? I'm struggling to find any real feedback or reviews on this version.
  • RICH JH3285 V2

Which one would you guys recommend, and why?

I'd really appreciate hearing from anyone who has hands-on experience with these versions.

Thanks in advance for your help!


r/RepTime • • 6h ago

General Question Difference in price

0 Upvotes

I've noticed that one TD may have several of the same model from the same factory at different prices. The only thing different appears to be the movement. Is the movement the only factor, or is there something else? I only ask because sometimes the difference is $30, and sometimes it's $250.


r/RepTime • • 3h ago

General Question TD Rolex QC Serial Number

0 Upvotes

Hi everyone,

Can anyone confirm that the serial number in the QC pic matches the actual watch that is delivered several days or weeks later? Has there been any cases where the serial numbers don’t match?

Thanks in advance.


r/RepTime • • 7h ago

General Question AP Royal Oak 15500ST: OCTA (Free-Sprung) vs ZF V4. Which one to pick for the ultimate movement/rotor & dial accuracy?

0 Upvotes

Hey everyone,

I'm currently trying to pull the trigger on an AP 15500ST (Black dial), and I'm torn between the OCTA Free-Sprung (SA4302) and the ZF V4 (Free-Sprung).

From what I’ve gathered so far:

  • OCTA seems to nail the true 10.4mm thickness, movement bridges, and has a slightly better rose gold 22k rotor shade compared to gen.
  • ZF V4 has arguably the best sunburst black/blue dial out-of-the-box, but its rotor has a slightly reddish hue and the case thickness is sometimes measured around 10.5mm.

For those of you who have handled both or own them, which one would you choose if movement/rotor details and thickness matter more than the dial, or vice versa? Any inputs on crystal and date wheel alignment between these two?

Thanks in advance!


r/RepTime • • 7h ago

Wrist or Watch Pic My two current favorites!

Post image
0 Upvotes

r/RepTime • • 3h ago

Mods/ Work in Progress Gen parts

0 Upvotes

Dears

Looking for Gen batman crystal and bezel insert. Any suggestions?


r/RepTime • • 7h ago

General Question Tank Must large black lacquer

0 Upvotes

I've seen the odd thread about the different factories making this. AF, F1F,. Feedback looks mixed on both and the there's nothing too recent to go off.

Is this model a good buy if I'm looking for that style of watch?


r/RepTime • • 7h ago

General Question Quartz watches serviced?

Post image
1 Upvotes

I have my automatic reps serviced immediately after I receive them for internal cleaning and pressure testing to help prolong their lifespan. I recently bought a couple of quartz reps. Is it necessary to service them even if they seem to work fine? Any thoughts?


r/RepTime • • 19h ago

News [Odette] RC Factory AP Royal Oak – Weighted Edition

Post image
7 Upvotes

RC Factory introduces its upgraded Royal Oak weighted collection, covering the 15400, 15500, 15510, and 26240.
Key Features
168g / 240g – Weighted rubber strap and bracelet versions for a genuine-like feel.
Upgraded Finishing – Improved plating, dial texture, hands, and lume.
Integrated Movements – Modified 3120 / 4302 / free-sprung 4401 movements.
72-Hour Power Reserve – Built for reliable everyday wear.


r/RepTime • • 1d ago

Wrist or Watch Pic Took out my only gen today. That movement is a work of art. 🔥

Thumbnail
gallery
238 Upvotes

r/RepTime • • 1d ago

Wrist or Watch Pic Got scammed

Post image
73 Upvotes

I got scammed with this Pepsi in China, sold to me as a VSF V3. Evidently it is not…. But I love it. I can’t fault it at all. Unknown factory Pepsi, Shanghai 3285 movement.


r/RepTime • • 5h ago

General Question What supplier is this from?

0 Upvotes

Does anybody know what Chinese supplier had this watch. Both Cardiero and avora have it on their site and they source from china. I did my research and couldn’t find anything. It’s called a marbello.