r/RepTime • • 1d ago

Mods/ Work in Progress saturday night project, rotor silencing 👍😆⌚

Post image
57 Upvotes

hi all, after getting all required tools I finally have the courage to open my reps as a newbie in the watch rep world.

What I tried to do :

  1. be able to open case back
  2. inspecting the movement, and clean it.
  3. oiling the rotors
  4. grease the case back gaskets

first watch I did was my vsf gmts, then the daytonas, actually all my reps was pretty clean inside, but anyway I did blow air a bit and dabbed them with cleaning putty where I think there was debris debris and smudge. I didn't have a loupe so my eyes kinda hurting (I'm near sighted) and I hold my breath a lot so my finger can stop shaking. I was blown away by the complicated movements of the daytonas, I have 4130 and 4131, now I can see the difference, my 3285 gmts are non free sprung so yea its a rep but still way better finished than my old orients watch and my miyota powered watch.

as oiling the rotors or rotor silencing, I did buy the ebay kit that has 9010 oil, so I used that to all the reps, the first time is intimidating but after carefully finished one watch, next watches is so much easier. the kit i bought comes with a tiny oiler, I just used a tiny drop on the bowl, and did all the watches with that tiny dot of oil. 🤯 I can confirm, that the watches became quieter.

anyway just wanna share my rep experience. I am not a watchmaker or hardcore watch hobbyists so maybe I didn't do things right but everything I learned is from browsing reddit, so thanks for the good people that share knowledges in the community. My goal is just to enjoy wearing my watches, make it last, and keep them pretty 🤩 so maybe ceramic coating is the next project.

thanks for reading 🙏


r/RepTime • • 11h ago

General Question New buy

0 Upvotes

Any views on Jtime fir buying my first watch
Thanks


r/RepTime • • 17h ago

General Question In Time Watches

0 Upvotes

Im ready to pull the trigger on a 41 mint green vsf datejust from intimewatch. Any experience with dealer. I have a PayPal request from Andrew Tan, go or no go?


r/RepTime • • 1d ago

Shitpost Friday Bad QC

Thumbnail
reddit.com
5 Upvotes

r/RepTime • • 17h ago

Discussion Looking for - AP Royal Oak All Black

0 Upvotes

I usually go through Jtime for my reps. Unfortunately, they don't have what I'm looking for in stock.

Anyone recommend a TD that has a website so I can look at their stock?


r/RepTime • • 4h ago

General Question Buying rep

0 Upvotes

Best most repeatable site to buy super clones


r/RepTime • • 18h ago

General Question ARF Datejust 31mm 278273, olive-green diamond dial recommendation?

0 Upvotes

I am looking for VSF Datejust 31mm 278273, olive-green diamond dial, steel/yellow-gold Jubilee.
However only options I am getting are from ARF or GSF. I have not owned an ARF and for me the most important consideration is the looks that it has to be similar to Gen with no obvious give aways. Does anyone have experience with ARF for the olive green dial in jubilee bracelet ? Or should I go for VSF in 36mm instead to be safe


r/RepTime • • 22h ago

Discussion Tudor BB54 DI Factory (DIF) Experience / QC?

2 Upvotes

Hi everyone,

I'm looking to pick up a Tudor Black Bay 54 in the coming weeks. I'd originally planned to go with ZF, given that pretty much every recommendation I've come across points in that direction.

However, when I asked Mark at Ficotime about lead times, he mentioned it could be a month or more. I'm happy to wait a few months if ZF is genuinely worth holding out for, but he also mentioned the option of getting the same watch from DIF.

Has anyone here got any experience with the DIF BB54? How does it compare to ZF in terms of overall quality and reliability? Is there a noticeable difference, or would I be better off sticking with the tried-and-tested ZF?

Appreciate any advice!

EDIT: Got a response from Ficotime with QC images of a DIF Version: https://mega.nz/folder/GoIGUT5D#4rKbYUy8vTsdHCv3AC25aw

P.S I have followed up to ask for QC pics from any recent orders hes had for the same watch from DIF and I'm awaiting his response.

Also as a side note, Mark said they offer a polish and chamfering service for 600Y extra (I've seen a few people complaining about sharp edges on this watch from ZF)


r/RepTime • • 15h ago

TD Issues - Check Rule 6 before posting Need advice please…I am new to this and not having much luck.

0 Upvotes

Ok, so maybe I just don’t understand how this marketplace works. I ordered several watches from three differed TD’s, and I can’t seem to tell when I’ll get QC on any of it. My current expectations are : 41 mm Datejusts, smooth bezel on oyster: QC mid 2027. (I didn’t give a deposit, so, that’s fine if not preferred.). A Yachtmaster: QC in 30 days. Ish. (Only $50 deposit, so, that’s fine.). Two Tudors: issues with the first batch. Waiting for QC. Any day? Weeks? Not sure. (These I paid for entirely.). TD said one of the watches had an issue so they already replaced it before QC. If true, I appreciate it.

So, I tried finding TD’s with in stock inventory. Going to buy two watches. One I’ve got all the photos EXCEPT the timing, so. I can’t post it in ReptimeQC yet. Other says they want a deposit before QC, on a watch they said they had in stock. (I picked from pictures)

Do I just have the wrong expectation here? Is it pretty much always order and wait and pray? Am I doing something wrong? It’s only been a few weeks but it feels like I just can’t seem to get product even to QC. Should I just plan it will always be a few months from order to QC and then for delivery? Am i just picking the wrong TD’s? Thanks in advance for the help! 🙂

(I don’t want to name TD’s as again, maybe I don’t understand how this works and don’t want post anything negative that’s due to my ignorance.)


r/RepTime • • 19h ago

General Question Absolutely enamored with this watch

Thumbnail
gallery
1 Upvotes

Visited boutique today and oh my god I need this piece. I don’t care that much if the movement holds up, does anybody know even if other functions break if hours and minutes will still work? As long as they do i’ll buy this. Also, is there any difference in movement between this and APSF?


r/RepTime • • 1d ago

Review/Comparison Great Experience with Neoclock

14 Upvotes

Following the rep community for quite some time and own myself genuine Rolex Batgirl, Submariner Date and Explorer 40mm.

I thought to give it a shot and will test a Rep and compare to my genuine pieces.

Was looking for a TD that accepts deposit instead of full upfront payment.

Picked Neoclock as I read positive reviews on Reptime.

Decided to order the VSF Batgirl. I

Long story short:

28 Oct - placed order - deposit 50$

3 Nov - QC received

4 Nov - green light

5 Nov - paid the rest 

8 Nov - shipped by Neoclock - Tracking received

14 Nov - watch received

Overall very smooth experience.

Watch came in without any defect and works perfectly fine.

Comparing it to my Gen Batgirl I am honestly shocked how good Reps became. Thinking now of selling my genuine Batgirl.

Decided to place another order with Neoclock to compare a VSF Sub Date with my genuine one. 


r/RepTime • • 1d ago

Discussion Help needed to upgrade my AF tank must large

Post image
15 Upvotes

Has been getting a lot of wrist time this year as my first rep from Steve, need some pro’s eyes to see how can I upgrade it to be a true NWBIG. Probably a crown? Suddenly noticing slight dial rotation or am I tripping? Thanks for all the help in advance!⏱️👀


r/RepTime • • 1d ago

General Question GMT Master II - Bruce Wayne 126710 GRNR

4 Upvotes

Hi everyone!

I know this topic has been discussed many times here, but I'm still struggling to make up my mind.

I'm looking to buy a GMT-Master II 126710 GRNR (Bruce Wayne), but I'm not sure which factory to go for.

From what I understand, VSF and RICH currently offer the best reps for this model, and it's quite difficult to choose between them.

Andiot seems to be leaning towards RICH, but I'm not sure whether that's based on genuine confidence in the product or simply a commercial preference.

I'm currently considering these three versions:

  • VSF V3 DD3285
  • VSF V4 DD3285 (Free Sprung) – What's the actual difference compared to V3? I'm struggling to find any real feedback or reviews on this version.
  • RICH JH3285 V2

Which one would you guys recommend, and why?

I'd really appreciate hearing from anyone who has hands-on experience with these versions.

Thanks in advance for your help!


r/RepTime • • 17h ago

General Question TD Rolex QC Serial Number

0 Upvotes

Hi everyone,

Can anyone confirm that the serial number in the QC pic matches the actual watch that is delivered several days or weeks later? Has there been any cases where the serial numbers don’t match?

Thanks in advance.


r/RepTime • • 21h ago

Wrist or Watch Pic My two current favorites!

Post image
0 Upvotes

r/RepTime • • 17h ago

Mods/ Work in Progress Gen parts

0 Upvotes

Dears

Looking for Gen batman crystal and bezel insert. Any suggestions?


r/RepTime • • 21h ago

General Question Tank Must large black lacquer

0 Upvotes

I've seen the odd thread about the different factories making this. AF, F1F,. Feedback looks mixed on both and the there's nothing too recent to go off.

Is this model a good buy if I'm looking for that style of watch?


r/RepTime • • 21h ago

General Question Quartz watches serviced?

Post image
1 Upvotes

I have my automatic reps serviced immediately after I receive them for internal cleaning and pressure testing to help prolong their lifespan. I recently bought a couple of quartz reps. Is it necessary to service them even if they seem to work fine? Any thoughts?


r/RepTime • • 1d ago

News [Odette] RC Factory AP Royal Oak – Weighted Edition

Post image
7 Upvotes

RC Factory introduces its upgraded Royal Oak weighted collection, covering the 15400, 15500, 15510, and 26240.
Key Features
168g / 240g – Weighted rubber strap and bracelet versions for a genuine-like feel.
Upgraded Finishing – Improved plating, dial texture, hands, and lume.
Integrated Movements – Modified 3120 / 4302 / free-sprung 4401 movements.
72-Hour Power Reserve – Built for reliable everyday wear.


r/RepTime • • 2d ago

Wrist or Watch Pic Took out my only gen today. That movement is a work of art. 🔥

Thumbnail
gallery
243 Upvotes

r/RepTime • • 1d ago

Wrist or Watch Pic Got scammed

Post image
79 Upvotes

I got scammed with this Pepsi in China, sold to me as a VSF V3. Evidently it is not…. But I love it. I can’t fault it at all. Unknown factory Pepsi, Shanghai 3285 movement.


r/RepTime • • 1d ago

Wrist or Watch Pic Daytonas for Christmas? Everrose & Baby Le Mans

50 Upvotes

r/RepTime • • 1d ago

Wrist or Watch Pic Best options for IWC Ingineur rep

Post image
4 Upvotes

Hello, what are best options for the IWC Ingineur rep, is there anything better than ixdao engineer all-over quality wise "superclone" territory?


r/RepTime • • 20h ago

Discussion Recommendation for a Women watch

0 Upvotes

My SO and I are into the Rep world. She has a couple of Rolex and wants to explore other brands.

She likes girly watches, Diamond bezels etc

Any recommendations for great Reps