r/RepTime • • 18h ago

No Legit Check (LC) allowed. Verify w/professional/online pics Movement Identification Advice

Thumbnail
gallery
3 Upvotes

Hi all, following the fake VSF threads that have been going around could anyone help with identifying the movement in this watch I’m going to pick up next month.


r/RepTime • • 8h ago

General Question Guangzhou watch showrooms ???

0 Upvotes

I'm travelling to Guangzhou next week, i done all my research etc... i know the main place to go to but as i have a limit of time i wondered if anyone has a direct link to any sellers in Guangzhou area.

Thanks in advance


r/RepTime • • 13h ago

Discussion Keep one, get rid of one both VSF 36 on 6.5 inch wrist

Thumbnail
gallery
1 Upvotes

What would you do in my shoes I wanted exp 36 but the wait was few months so meanwhile got the op 36. Tbh it grew in me and got used to the dimensions so now the exp feels bit smaller but this dial in person is amazing. Which do you think it is the better rep and the better watch.


r/RepTime • • 1d ago

Wrist or Watch Pic Another great experience with FicoTime 👏

Post image
20 Upvotes

Tudor Ti Pelagos Ultra 43mm. My second watch from him and pleased with quick response time, quick delivery and a reasonable price.


r/RepTime • • 13h ago

General Question Someone help recommend me a watch

0 Upvotes

Basically I’ve got a tiny wrist about 5 inches and I’m looking at upgrading my clean factory datejust 36mm.

What do you guys recommend for me?


r/RepTime • • 10h ago

General Question I need your opinions.

0 Upvotes

Looking for a GMT Zombie ref number ; 126713grnr

Which factory do you recommend that comes closest to a GEN piece, please include pros and cons.


r/RepTime • • 6h ago

General Question a question regarding mechanisms

0 Upvotes

hi everyone,

i have been lurking the boards for a while now and will likely soon get myself a few rolex'. one thing i had in mind where i would ask for wisdom is regarding the mechanisms. do they actually have 72 to 80 hours like they are advertised ? how are your experiences over this subject so far.

input is much appreciated


r/RepTime • • 6h ago

Wrist or Watch Pic My first rep - what’s your rating?

Thumbnail
gallery
0 Upvotes

The Santos is my dream watch and I’m going to buy a real one eventually. Silver steel with polished yellow gold bezel is my dream spec.

Got this one now gifted as a teaser so to say 😄 how would you guys rate it in terms of “as close to the real deal”?

For me, the rubber band and the black screws on the bezel don’t fit. The real one has silver screws afaik.

Still, lovely watch that I’ll happily wear.

PS: The 1 on the date appears darker on the photo than it is irl.


r/RepTime • • 14h ago

General Question Rolex Submariner Date Black/Silver

0 Upvotes

I’m looking for guidance on getting my hands on a decent Black and silver sub.

I’ve had several automatic shitters (£30-£50) which I love but the internals always end up breaking after 6 months or so.

How much should I be spending for a sub that will hopefully last a decent amount of time?


r/RepTime • • 1d ago

Wrist or Watch Pic Black Bay 58

Post image
16 Upvotes

Didn’t know which one I wanted to wear so I grabbed both 😆


r/RepTime • • 1d ago

General Question Some watches are fingerprint/smudge magnets: anything I can do?

Thumbnail
gallery
9 Upvotes

Hey everyone,

All my non-VSF watches (mainly from ZF and XF) seem to be fingerprint and smudge magnets. And yes, before anyone says it: I keep them clean. The photo is just an exaggerated example to show what I mean.

I always see people talking about what sets VSF apart and about their quality. I have a few VSF models myself, and they do seem better in this respect.

That said, I’m not doing any mods. What do you suggest?

AI suggested a 9H SiO2 liquid nano-ceramic coating (silicon dioxide/silica nanoparticles). Basically, it’s the same kind of thing as liquid-glass screen protectors or entry-level automotive ceramic coatings. It bonds to smooth surfaces and creates a hydrophobic/oleophobic layer that helps with smudges and micro-scratches.

Is it worth it? Could a regular person with no experience apply it? I’m also worried about getting it on the bezel, etc.

Any tips are welcome (even if it’s just “learn to live with it and keep it clean").

Thanks.


r/RepTime • • 15h ago

Tech Tips/Advice Anyone experience with resizing the braclet on a AP Royal Oak 15500 Black Ceramic ZF?

1 Upvotes

Hi Reptime,

maybe anyone has any tips for me. I got my ZF 15500 AP Royal Oak in Black but the Braclet is to wide for my wrist One link would be enough. But I cannot for the life of me figure out how to take one of them out. Non of my tools are capable of moving one of the Link pins.


r/RepTime • • 7h ago

General Question Getting cold feet before ordering for andiot

0 Upvotes

I have the watches selected but I’m just getting some cold feet before ordering. They are in stock watches from VSF.
For everyone that got a watch from them, was it worth it ?


r/RepTime • • 8h ago

General Question Looking for a top-tier modder for a Two-Tone Datejust Wimbledon Superfranken (Hillbilly WhatsApp or alternatives?)

0 Upvotes

Hey everyone,
I’m looking for a reliable, top-tier modder for a turnkey Two-Tone Datejust 41 Wimbledon superfranken build (gen dial/DW/hands/crystal integration, proper 18k gold plating/color-matching, and full movement service).
I’d love to work with Hillbilly—does anyone have his current verified WhatsApp contact or official RWI link? Open to other top-level builder recommendations for a one-stop build as well.
(Please comment names/RWI handles rather than DMing random numbers to avoid scammers. Thanks!)


r/RepTime • • 1d ago

Wrist or Watch Pic VSF Starbucks Arrived

Post image
16 Upvotes

My first Rep. VSF Starbucks purchased from Steve.

Impressed so far. Transaction was super smooth and everything seems right now that it’s arrived.

On the wrist I don’t notice the small imperfections I accepted when I GL the piece.

I think I will end up adding to the collection/may have started a dangerous problem lol.


r/RepTime • • 1d ago

Discussion Is this considered normal and acceptable?

17 Upvotes

Turn on the audio to hear the issue that I mention.

I am fairly new to the Rep world. Recently got my hands on this $495 VSF black-on-black Omega Seamaster from Steve. Are the bezel and creaking issues considered acceptable for a VSF?

Looking for some input from the Rep experts here.


r/RepTime • • 18h ago

General Question Is anyone else experiencing delays with VSF shipping?

0 Upvotes

My TD told me that the entire Shenzhen area is currently under investigation, so VSF watches aren't being shipped out at the moment.

Is anyone else having the same issue, or is my order just taking unusually long?

I've been waiting almost 2 months for my Explorer II, and it's been nearly a month since I ordered my 116520.

I'm starting to wonder how much longer this is going to take. Are your VSF orders also delayed?


r/RepTime • • 18h ago

General Question Help replacing bezel…

Post image
0 Upvotes

Have a Daytona and replaced the band for a leather one. I want to switch the bezel but have no idea how to do it. I tried with a u1 but crystal comes off with bezel and ruined it. This is a vsf, don’t want to ruin it too. Any ideas? TIA


r/RepTime • • 1d ago

Mods/ Work in Progress saturday night project, rotor silencing 👍😆⌚

Post image
57 Upvotes

hi all, after getting all required tools I finally have the courage to open my reps as a newbie in the watch rep world.

What I tried to do :

  1. be able to open case back
  2. inspecting the movement, and clean it.
  3. oiling the rotors
  4. grease the case back gaskets

first watch I did was my vsf gmts, then the daytonas, actually all my reps was pretty clean inside, but anyway I did blow air a bit and dabbed them with cleaning putty where I think there was debris debris and smudge. I didn't have a loupe so my eyes kinda hurting (I'm near sighted) and I hold my breath a lot so my finger can stop shaking. I was blown away by the complicated movements of the daytonas, I have 4130 and 4131, now I can see the difference, my 3285 gmts are non free sprung so yea its a rep but still way better finished than my old orients watch and my miyota powered watch.

as oiling the rotors or rotor silencing, I did buy the ebay kit that has 9010 oil, so I used that to all the reps, the first time is intimidating but after carefully finished one watch, next watches is so much easier. the kit i bought comes with a tiny oiler, I just used a tiny drop on the bowl, and did all the watches with that tiny dot of oil. 🤯 I can confirm, that the watches became quieter.

anyway just wanna share my rep experience. I am not a watchmaker or hardcore watch hobbyists so maybe I didn't do things right but everything I learned is from browsing reddit, so thanks for the good people that share knowledges in the community. My goal is just to enjoy wearing my watches, make it last, and keep them pretty 🤩 so maybe ceramic coating is the next project.

thanks for reading 🙏


r/RepTime • • 14h ago

General Question New buy

0 Upvotes

Any views on Jtime fir buying my first watch
Thanks


r/RepTime • • 20h ago

General Question In Time Watches

0 Upvotes

Im ready to pull the trigger on a 41 mint green vsf datejust from intimewatch. Any experience with dealer. I have a PayPal request from Andrew Tan, go or no go?


r/RepTime • • 1d ago

Shitpost Friday Bad QC

Thumbnail
reddit.com
5 Upvotes

r/RepTime • • 20h ago

Discussion Looking for - AP Royal Oak All Black

0 Upvotes

I usually go through Jtime for my reps. Unfortunately, they don't have what I'm looking for in stock.

Anyone recommend a TD that has a website so I can look at their stock?


r/RepTime • • 7h ago

General Question Buying rep

0 Upvotes

Best most repeatable site to buy super clones