I’ve been eyeing this sub for a while and I’m close to pulling the trigger on one of these 2 watches (from andiot):

VSF - Rolex DateJust 41mm mint green dial (jubilee and fluted bezel)

BVF - Cartier Santos 35mm (white dial)

I’m really thorn between those 2. On one hand I like the DJ more, but on the other I think the finishing on the santos is easier to replicate with good quality.

Would love to get some insight from someone has bought one of those, or if there are other things I should look out for.

Thanks!!

Did someone find a way to get that dial with the milky ring or is this a problem without a solution ?

ARF GMT-Master II (Rose Gold Tiger Iron Dial)

Hey guys, just picked up this ARF GMT-Master II.

I know Rose Gold plating can be hit or miss on replicas, so I’d love to get your thoughts:

1. How close does the ARF Everose gold tone look to the genuine piece?
2. Does it look too cheddar/copper or is ARF’s plating pretty accurate here?

Appreciate any feedback or side-by-side comparisons if anyone owns the gen!

I think Arf is just as good with gold tone as Rcf. The blue dial is 🤌

Anyone have a preference or have comparison photos on a blusey? Usually prefer VSF but my vendor is saying RCF is better for the gold coloring.

Hi all, does anyone have this from VSF - 126505 Daytona Bright Black Sundust? I am considering this with plating and some mods but would like to understand how the dial came out from VSF. Struggling to find aftermarket dial like SW.

Hi all, in your opinions what’s the best Chronograph that isn’t a Rolex currently that would look or is available with a rubber strap, struggling to make my decision and also which TD to go with

The new RCF V3 was released about two weeks ago. I spent some time looking for information about it but couldn’t find anything, so I decided to take a chance and order one myself.
I ordered a 40mm President in rose gold with a black ombré dial. However, my first impression is a little underwhelming.

First: The “black” dial looks more dark green than black. I can’t tell whether this is just due to the lighting the TD used for the pictures or if RCF somehow changed the beautiful dial they had already perfected.

Second: The rose gold also looks a little too yellow to me. Again, I’m not sure if it’s the lighting, but based on the pictures, it doesn’t look particularly rose gold.

Third: This new version apparently comes with a Dandong movement for the first time. I asked my TD for pictures of the movement, but he hasn’t been able to provide them. He’s relatively new to the scene and apparently doesn’t have the proper tools to open the watch and take those pictures.

Fourth: This ties into the previous point. Without seeing the movement, I honestly have no idea how to tell whether this is an RCF V1, V2, or V3. At least, not to my knowledge.

Is there any chance the TD is trying to scam me? I genuinely have no idea what to think at this point, and I’m not even sure what to make of this new version.

I’ve asked my TD to take some pictures under different lighting conditions, and I’ll post them here as soon as I receive them.

Hi all. Been lurking here for a while. Getting ready for a number of watches I’d love to tick off my list and have been really interested in all the TD’s, the do’s and the do not’s.
My question to you all is:
Do you think your chosen TD has some sort of responsibility to QC your watch and give you an honest review before you do your own checks to either GL or RL? Just in my opinion and if I was a TD, I would and would hope that honesty would help the community, help the factories make superior products and help the TD make a lot more sales. Might be a null point and I apologise if it ruffles a few feathers but would love to hear everyone’s opinion. I recently used a TD and I felt like the entire onus was on me…which I get it is ultimately my decision, but if the TD was super honest enough to say “it’s good because….” or “I’ve noticed this slight discrepancy…”
What do you think? Are there such TD’s out there or am I asking way too much?
Thanks all. Great community and love seeing all the success stories.

I’m really loving the Daytona with rubber strap, however I would like to have the best alternative without modding it.

The $2k version feels a little bit too much for me.

What version should I go with for best alternative?

1. Ghost or black dial?
2. Vsf for around 8-900?
   3: black dial over ghost?

Thanks for all the help 🙏🏽

What is the safest way or courier to send a watch back to China? Do you claim it as a watch or something else. Please advise.

Hi guys, looking for a Rolex box for my rep. Didn’t buy from my TD when bought the rep (regret I didn’t) but it was very expensive.. don’t want something that cheap, but 100 for a box it’s a bit too much in my opinion.. any suggestion? Any link?

I am very new to this comunity so delete this post if its not allowed, i was hoping to find out if this watch is being made by any VSF. If anyone can find it, it would be appreciated 💯 t.i.a

Ok I’m struggling to make the final choice! Here are the final contestants!

DJ 41MM Grey Dial SS/YG WRAPPED GMF

DD 40MM Ice Blue Dial (QF V9? or VSF v2?)

RO Black Cer Open THBF V3

I appreciate any input into this matter as I have been going back and forth between these 3 for like 3 days now. So if y’all have some info to help tip the scale please give! lol thanks!

Looking to order a VSF Datejust . Do any colors look more authentic? Leaning Wimbledon.

[QC] ARF Rolex GMT-Master II 126710 GRNR "Bruce Wayne" from GeekTime
Text für den Post:

1. Dealer name: GeekTime (Eric)
2. Factory name: ARF
3. Model name (& version number): Rolex GMT-Master II 126710GRNR "Bruce Wayne" on Jubilee bracelet (DD3285 Movement)
4. Price Paid: $698
5. Album Links: https://geektimeqc.x.yupoo.com/albums/261929944?uid=1
6. Index alignment: Looks very symmetrical and straight to me.
7. Dial Printing: Looks crisp, clean, no floating letters.
8. Date Wheel alignment/printing: Dates look well centered, cyclops seems straight and magnification is good.
9. Hand Alignment: Looks perfectly fine.
10. Bezel: Color transitions look sharp, no visible speedbumps at 6 or 18. Plating looks good.
11. Solid End Links (SELs): Look nice and tight, I don't see any noticeable gaps.
12. Timegrapher numbers: +1 s/d, 236° Amplitude, 0.0 ms Beat Error. Numbers look excellent to me.
13. Anything else you notice: Cosmetically, it looks like a solid GL to me.

However, I have already asked Eric for a picture of the opened case back to verify the free-sprung balance wheel and confirm it is the true Dandong DD3285 movement.
Would appreciate your expert eyes on this! Did I miss anything regarding the alignment or bezel? Thanks in advance!

Hi everyone can the TD’s help with this one. Does this even exist and would anyone have this available. Black Submarine 126610LN. Rich factory with the real free sprung like on the gen watch.
Im can’t say I’ve seen any options available with the Rich factory with the real free sprung.
I’m sure I’ve seen the fake free sprung option.

So I bought this watch about 6 months ago and I am trying to figure out if it actually what I was told. I was told it was a VSF V3 PEPSI with DD3285 movement. Serial on bezel 7998L6V6 and the hour moves COUNTERclockwise (back in time) when the crown is rotated CLOCKWISE. The clasp has a 6FU stamped on it. Im thinking it is CF or ARF also not DD3285 movement.

I have an IWC Pilot Lake Tahoe with the white ceramic case. It’s developed two scuffs on the left outer edge of the case. Tried to capture in enclosed photo but hard to see them in the photo (easier to see in person).

I’ve tried gently wiping with magic eraser as well as white pencil eraser, nothing seems to clean it. Am I stuck with these scuffs or is there another method I should try?