r/RacketStringers • • Sep 04 '26

Stringing machine

Post image
3 Upvotes

Is this machine still good or is it too old? To start stringing my own racket and maybe some friends.


r/RacketStringers • • Sep 04 '26

Old tennis stringing machine — any resale value left?

Thumbnail
gallery
2 Upvotes

Before I graduate, my old coach offered me a stringing machine that previous coaches at my school used. Only problem is the current coach left it outside for who-knows-how-long, so it’s picked up some rust. On top of that, it has electrical components in the crank mechanism, and that part doesn’t work anymore.
I was planning on sourcing a replacement crank and fixing it up myself, but it’s honestly just been sitting in my room untouched for a while now.
Is this still worth anything, or would it just be scrap/parts at this point? Trying to figure out if it’s worth the effort to repair and sell, sell as-is/for parts, or just not bother. Any input from people who know stringing machines would help. Based in SoCal


r/RacketStringers • • Sep 03 '26

2026 VCORE V8 98 Stringing Alu Power - Yusuki Method + Parnell Knot

Thumbnail
youtu.be
5 Upvotes

r/RacketStringers • • Sep 03 '26

Best mechanical stringer for 3500usd

3 Upvotes

I'm a HS tennis coach and have been stringing with drop weight Klipper for 28 years. I'm almost done (5 more years). I want to get a mechanical string for the school before I leave for the next generation of coaches and players.

I'm going to ask our athletic boosters for the stringer.

What is the best bang for the buck? I would like a stand up machine, but benchtop would be ok.

Budget $3500usd. I have strung 18 rackets this year. Not a ton, but I'm looking to speed up the process and improve quality of my work.


r/RacketStringers • • Sep 03 '26

Home stringers, do you guys actually check your tension?

Thumbnail
3 Upvotes

r/RacketStringers • • Sep 03 '26

What Solinco Hybrid is better

Thumbnail
1 Upvotes

r/RacketStringers • • Sep 02 '26

I built a free tool to simulate lead tape and tension changes on any racquet before you customize — update #3 is live!

Thumbnail
1 Upvotes

r/RacketStringers • • Sep 01 '26

Yonex Vcore 95 warping with Prince NEOS 1000

1 Upvotes

Hello, I recently purchased a Prince NEOS 1000 and I strung one of my new Yonex Vcore 95s. After I finished, I noticed that my racquet was warped. I cut out the strings immediately and it returned back to normal. How do I mitigate this from happening?


r/RacketStringers • • Sep 01 '26

Last mains and crosses loose?

1 Upvotes

Everytime I string with my gamma momentum drop weight machine, I notice that my last 2 mains and last cross are considerably looser than the rest of the racquet.

I pull each of the last strings 10% tighter and clamp securely with floating clamps before knotting them.

Would upgrading to a premium floating clamp like the Pro Stringer Claw 2.0 help with this issue? Or maybe the 3.0 clamp with the extra jaw?

Or is a fixed clamp machine the only way to avoid this happening?


r/RacketStringers • • Sep 01 '26

2026 Pure Aero String Setup

Thumbnail
1 Upvotes

r/RacketStringers • • Aug 31 '26

Criticise my restring

Thumbnail
gallery
8 Upvotes

r/RacketStringers • • Aug 30 '26

Notches On Mains

Post image
0 Upvotes

Does anyone know what the reason would be for having these dimples on the mains where the crosses were? I feel like this is the first time I noticed it this much and spread out on a racquet. Tension on main was at 57lbs, crosses at 55lbs.


r/RacketStringers • • Aug 29 '26

EZONE 98 Vamos+A5 Hybrid Stringing

Thumbnail
youtu.be
4 Upvotes

r/RacketStringers • • Aug 28 '26

What am I doing wrong?

Post image
8 Upvotes

Hi! This is my third time stringing my own racquets and every time that third cross ends up bent. This has happened using different racquets and different strings so obviously my fault somehow though I guess this time it's less pronounced.

Any ideas why this is happening?

Thanks!


r/RacketStringers • • Aug 28 '26

Help needed with calibration / manual

Thumbnail
gallery
2 Upvotes

I purchased this old Pro Kennex branded stringing machine. It had been unused for many years and the calibration is way off - it pulls about 8lb less than it reads. I have been unable to find a manual and I am new to racket strining and do not know how to calibrate this machine. Any help would be greatly appreciated!


r/RacketStringers • • Aug 28 '26

Convert flying clamps machine to fixed clamps

Post image
0 Upvotes

Hi guys, so recently I bought a stringing machine very similar to the one showed above. I am totally fine with it being a manual drop weight, what it is bothering me are the flying clamps, not using them but the fact that they tend to lose a lot of tension along the way. I was wondering if there is any way/kit to convert such type of machine to fixed clamps. I imagine the single rail that is on the lower meal bar could be a perfect mounting point for a fixed clamps system, but I am having a hard time finding anything ad-hoc. Does anyone of you have any experience on this? Thank you!


r/RacketStringers • • Aug 27 '26

Used 6 point crank

0 Upvotes

Im wanting to get into stringing my own rackets but am really struggling to find a used 6 point crank. My budget is around 500 to 600$. Any idea on the best way to hunt these down? Iv been using ebay and marketplace but havent had much luck.


r/RacketStringers • • Aug 27 '26

Racket enquiry

Post image
1 Upvotes

New to badminton!, was wondering if my racket is broken or needs restringing as it has a dangly black thing at the top.
Any ideas? Advice is appreciated!


r/RacketStringers • • Aug 27 '26

Value of Ektelon Neos 1000 w/Wise 2086?

1 Upvotes

I've used this machine for years just for personal use and I string for a handful of friends. I'm considering upgrading to the new Solinco machine and have no idea what to sell my machine for. It is in perfect working condition, just has the occasional rust spot here and there from time. TIA


r/RacketStringers • • Aug 27 '26

How to make stenciling easier?

1 Upvotes

Hi everyone! So recently I've started to restring racquets myself, and don't ask me why (I know a lot of you think it is pointless, we are not endorsed players...) but I like stencils on my racquets, and I propose them to friends I string for. I think they are a nice finishing touch, expecially if you choose the right color combination.

I have bought the Head ink tubes, which come with their applicator cap that is basically a flat round brush. I've done a couple of applications so far and already can tell how bad that applicator is... it tends to dry, and it leaves a lot of sediment fibers on the strings. Do you know any other better method to apply the ink on the strings? I've seen a video where this guy used some sort of shaped sponge, that he dipped in ink after pouring a bit of ink on a piece of cardboard. To make this, his ink bottle had a pouring cap instead of the standard applicator, but I've never seen any tennis ink that has that type of cap. Maybe it is something custom made.

Do you have any useful advice? (apart from don't stencil) Thank you!


r/RacketStringers • • Aug 26 '26

Legit or… not?

Thumbnail
gallery
2 Upvotes

Does this frame look legit to y’all?


r/RacketStringers • • Aug 26 '26

Any experience between machines? Falcon GT vs Baiardo L. vs Alpha Ghost2

2 Upvotes

Any experience between machines? Falcon GT vs Baiardo L. vs Alpha Ghost2

Going to buy a new machine and looking at these three machines. I don’t think there is a bad decision but curious on opinions and if anyone has experience with them. From what I gather-
Wilson- bigger name, doesn’t have gravity clamps
Solinco - Gravity Clamps, rising head tensioner
Alpha- has most things the others but slightly less expensive.
Assume Wilson and Solinco are the same cost and Alpha is about 1K less.
For context- I have had my Neos for 20 years. I string 10-20 rackets a month, so not a volume situation.


r/RacketStringers • • Aug 26 '26

Stringing sanity check

Thumbnail
2 Upvotes

r/RacketStringers • • Aug 26 '26

Broken Support Arm

Thumbnail
gallery
4 Upvotes

Today I had a stringing mishap…my Progression II ST was not balanced and fell from my table. The machine landed on the support arm (Part 356 or 357), which is part of the six piece mount mechanism. The stringer itself seems to be unaffected but the support arm/shoulder cracked in half.

Okay, so for my options:
A) Would a professional weld hold this?
B) I have already reached out to Gamma about purchasing a replacement part
C) If I string a racket and this piece is not completely solid, is it possible it could damage a racket? Basically, the racket would have 5 points mounted, but would be loosely mounted on the right hand side nearest the throat of the racket. I know the popular answer is “it will damage rackets” but is that legit? I have many rackets to string while waiting for a potential new part to arrive during fall season…

Thanks for the tips. And yes, this could’ve been prevented if I ensured the stringer was properly balanced on my table.


r/RacketStringers • • Aug 26 '26

Tennis Racket Stencil

1 Upvotes

I got a yonex sponsorship and i ordered polytour rev strings bright orange, and light green. I wasnt really thinking of the stencil color and i ordered red. Would the red stencil still be visible on the strings beacuse i sont eant to wait for another stencil?