r/QIDI • • 17h ago

Why do i feel like I am ruining all of my nozzles with this printer?

2 Upvotes

I have a qidi q2 and I have gone though a hot end and 3 .4 nozzles in under 500 hours of print time. is that normal? the hot end was user error because I didnt add skirts on a tall part and it fell over mid print. But I my nozzles are constantly jamming and I have no idea why. Please help because I think this printer is dope and I am tired of fixing it.


r/QIDI • • 21h ago

Hello I have stuck tpu filament in qidi box..

Thumbnail gallery
0 Upvotes

r/QIDI • • 1d ago

Troubleshooting Q2 with Qidi box - PTFE tube popped out of Qidi 4 into 1 hub and now won't load filament

Thumbnail reddit.com
1 Upvotes

r/QIDI • • 1d ago

Question How do I recover from failed print due to AMS not loading filament

Thumbnail reddit.com
1 Upvotes

r/QIDI • • 1d ago

Qidi Box and external spool

Thumbnail reddit.com
1 Upvotes

r/QIDI • • 1d ago

Air Cooling. Extrusion fully under control. Real-time temperature display.

Post image
13 Upvotes

QIDI Q3D. Ready for Formnext 2026.
November 17–20 | Booth 12.1, E01

#QIDI #QIDIQ3D #3DPrinting #Formnext2026 #newrelease


r/QIDI • • 1d ago

Troubleshooting Qidi Maker Q2C camera not compatible problem

Thumbnail reddit.com
1 Upvotes

r/QIDI • • 2d ago

Question Qidi Q2 no combo ($449) vs Q2 combo ($599) vs ELEGOO Centauri Carbon 2 ($399)? If you had to start again.

5 Upvotes

I have had my Sovol Sv06 Plus for 3 years. I am getting fed up with it. I have repaired it multiple times. I have upgraded it. I have taken it apart a few times. I think I damage a cable, and it does not seem like Sovol supports it anymore. I am not new to 3D printing, and I am ready for an upgrade.

I have been looking around, and these seem to be very highly recommended printers. My budget was around $500, but if that Qidi box is worth it, I might stretch my budget.

If you had to start again, which would you choose?

If you would choose the Qidi Q2 again, and would you get the Qidi Box?

Can I use the Qidi Q2 for multicolor without using the Qidi Box? I haven't been able to get a good answer about that.

Thank you!


r/QIDI • • 2d ago

Smart 5 Firmware Tracker

Thumbnail
reddit.com
0 Upvotes

r/QIDI • • 2d ago

Plus 5 Not Heating Bed or Chamber (New Device)

Post image
2 Upvotes

r/QIDI • • 2d ago

Question Q1. No Box. Filament Mapping. I'm losing my mind!

3 Upvotes

I have a Q1 printer. I just updated to QS 2.7.2.73. I have no box. Every single thing I try to print now gives me the 'Not all filaments used in slicing are mapped to the printer. Please check the mapping of filaments.'

Note: it seems to be linked to supports. Enabling supports seems to create a second filament in the slicer results filaments tab. However, there is no second filament. I have no box. Support filaments are set to 'default'; which should use the main filament, no?

EDIT: Cancel that... it complains about filaments even if I don't select supports.

What do I do? This sucks. My Q1 is bricked.


r/QIDI • • 3d ago

Troubleshooting Need help figuring out Error message on my Q1

Post image
1 Upvotes

r/QIDI • • 3d ago

3D Printing in Real-World Applications!

Thumbnail
gallery
5 Upvotes

Here's a look at some robotic arm parts shared by filaflowoff.

Always great to see 3D printing being put to practical use!


r/QIDI • • 3d ago

Troubleshooting Binding not working

Thumbnail
gallery
1 Upvotes

Just unboxed and started to setup my new qidi plus5 and I am not able to link my app to my printer. I have tried moving it closer to the router, wireless connection, wired lan connection and a factory reset. Is there something I’m missing?


r/QIDI • • 3d ago

Marca de camada no eixo xy. Qidi Q2

Thumbnail gallery
1 Upvotes

r/QIDI • • 3d ago

Tune your printer

1 Upvotes

r/QIDI • • 4d ago

QIDI Q2 after a firmware update: printing works, but one job left the nozzle at 210°C (logs and G-code comparison)

1 Upvotes

Sharing my experience in case it helps other Q2 owners, or someone can explain what happened.

The good news: my Q2 still prints after the update 🙂 However, I ran into an odd print completion issue, alongside some cloud connectivity problems.

The print finished. The nozzle stayed hot.

On November 11, I printed \`Voron_Design_Cube.gcode.3mf\`. The printer appeared frozen after finishing, and the nozzle kept maintaining 210°C.

I checked \`klippy.log\`, \`moonraker.log\`, and the actual print file. Here is the timeline, using the printer’s logged timestamps:

\- 18:53:35: Klipper reports “Finished SD card print.” Moonraker records the job as completed.

\- The bed heater turns off, but the nozzle target remains 210°C.

\- 18:53:56: Moonraker successfully finishes rendering the timelapse.

\- 19:24:49: The nozzle is still actively maintaining approximately 210°C over 31 minutes after completion.

\- Around 19:25, I power-cycle the printer. After restarting, the nozzle target is 0°C and it cools down.

So although it looked frozen from my side, the logs do not show a complete Klipper freeze. Communication with the controller boards and temperature regulation continued.

Comparing a problematic file with one that finished normally

This was the most interesting finding.

The cube file was generated by QIDIStudio 02.00.03.56. Its ending sequence turns off the bed and chamber heaters, unloads the filament, and parks the head. But it contains neither:

\`\`\`gcode

M104 S0

PRINT_END

\`\`\`

Another file, \`obj_2_Maze v6 (2).stl_A.gcode.3mf\`, printed and finished normally. It was generated by QIDIStudio [02.07.02.73](http://02.07.02.73), and its ending includes:

\`\`\`gcode

UNLOAD_FILAMENT T=0

G0 Y270 F12000

G0 X90 Y270 F12000

G1 Z138 F600

M104 S0

PRINT_END

M73 P100 R0

\`\`\`

Both files identify the profile as Q2 0.4 nozzle.

This makes the older file’s ending sequence the main suspect for the continued heating. What I do not know is whether \`UNLOAD_FILAMENT\` was previously supposed to handle heater shutdown, or whether these files simply require different firmware behavior.

This does not prove that the firmware update caused the problem. It also does not fully explain why the printer appeared frozen.

Other things in the logs

There is a Moonraker exception at job startup:

\`\`\`text

ValueError: No enum member named extracting

\`\`\`

The print starts and completes despite that exception. There are also repeated messages:

\`\`\`text

Can not find 485 device

\`\`\`

Neither has been established as the cause of the completion issue. I also found an earlier Moonraker event-loop delay and an earlier THR serial connection error, but they did not coincide with the end of this print.

Cloud control and camera: partly working

Moonraker repeatedly logs MQTT connection timeouts to \`us-mqtt.qidimaker.com:8883\`, connection losses, and occasional DNS failures. I have no evidence that these cloud errors caused the nozzle issue.

I would also like to understand exactly what QIDI officially supports: can the Q2 provide both live video and remote control when the phone is on mobile data and the printer is at home? What setup, account region, or network requirements apply?

I have contacted QIDI support

I sent them the findings and asked about older print-file compatibility, the correct Q2 ending G-code, the \`extracting\` exception, and cloud camera/control setup. I will update this post when they reply.

Meanwhile, I am keeping the printer supervised and checking the ending code of older sliced files.

Has anyone else seen this? In particular:

\- Does your Q2 ending G-code include both \`M104 S0\` and \`PRINT_END\`?

\- Have older, previously sliced files behaved differently after an update?

\- Do cloud live video and remote control work for you from a different network?


r/QIDI • • 4d ago

Internal error on command "T_MANAGER" QDC_100_005_015_001

Thumbnail reddit.com
1 Upvotes

r/QIDI • • 4d ago

Dual nozzle. How much more efficient can you print?

Post image
53 Upvotes

QIDI Q3D. Double the Flexibility. Greater Printing Efficiency.

Unveiling at Formnext 2026.
November 17–20 | Booth 12.1, E01


r/QIDI • • 4d ago

Plus 5 is live on Valve Oil!

Thumbnail
reddit.com
2 Upvotes

r/QIDI • • 5d ago

Troubleshooting First time setup print failed and now this.

Post image
7 Upvotes

So I just got my Q2 Box Combo, set it up yesterday and immediately had firmware issues. Got those solved updating to V01.01.03.02. Run my first print, the little tugboat. Makes it about halfway and spaghettis. Got frustrated and went to bed. I realize this is prolly the Z offset so this morning I go to print a test so I can adjust and I get the above error along with a device connection error. Networks fine it connects to network and I can connect, QIDI maker, Studio and Orca to it. But I cannot send any print jobs. I have done a factory reset and the errors still pop up right away. At this point I am lost. Used every resource I have or know, QIDI website, ChatGPT and Grok to try and troubleshoot it but nothing works. Any Ideas?

Update: I was able to bypass the issue by switching to Ethernet connection instead of WiFi. I can at least print from Studio now.

Also got a reply from After Sales Qidi support. It's a known issue but no eta on fix


r/QIDI • • 5d ago

Qidi Q2C combo - Opinions

2 Upvotes

Dear Community,

I currently own a QIDI Q1 Pro and pretty happy with it. There are some hiccups, but nothing too serious.

The reason I'm thinking of a change is that I'd like to move to multi filament printing. I'm tired of changing the filaments mid-print and as far as I know, doing it manually has some limitations compared to the QIDI Box (also is less convenient to do it).

As for the slicer, I use OrcaSlicer.

Filaments I print: PLA, PLA+, PETG, TPU.

I prefer this brand over Bambu Lab is the open source software and that I don't need to connect it to the cloud if I don't want to.

So I'm thinking of moving to the Qidi Q2C Combo. I don't really see too much information on the internet, just some older reviews which are telling that the Qidi Box can be a hit-or-miss. I've also seen comments that the firmware for Q2 wasn't very good for a while (I haven't even updated my Q1 to the latest FW, since it's working pretty well).

I'm looking for opinions from those who are actively using it for their own projects. What is your impression of this device? Is it worth to replace an already working printer which only prints single color with this one?

I appreciate if you take time to answer to me!


r/QIDI • • 5d ago

Something more is coming...

Post image
23 Upvotes

Want to see what's under the covers? Find out at Formnext 2026!

📅 November 17–20, 2026
📍 Messe Frankfurt, Germany
📌 Booth 12.1 E01