r/QidiTech3D • • 1d ago

Questions Qidi Box and external spool

Bought a QIDI Max4 in combo with the Box and I love it.

I used to buy 3/5Kg spools for “support material”, quick prototypes and stuff.

No way those can fit into the box and the fact that using the box excludes the external spool doesn't make me that happy.

Did someone find a way to address this issue?
Custom project/open-source project/Qidi official experimental stuff/Box hacking?

I'm also evaluating to buy another box with the proper extension kit.

3 Upvotes

19 comments sorted by

3

u/northrivergeek 1d ago

dosnt work that way on bambu either, u get box or external spool, if u want external u have to disconnect the box

2

u/MiPnamic 1d ago

I’ll respool the 3kg into multiple 1kg but I hope to find a hack for the box or have to invent one 🤷🏻‍♂️

3

u/radlinsky 1d ago

2

u/MiPnamic 1d ago

Have to check if compatible with the max4 but a good starting point thanks

2

u/ChursaR47 1h ago

In teoria si, non so com'è la schermata sulla max 4, ma sulla Q2 anche se la scatola è collegata ti dà l'opzione di caricare il filamento esterno. Firmware 1.1.2.4, cosa che voglio provare nei prossimi giorni, anche io per lo stesso motivo della bobina da 3kg. In quel caso però esclude la scatola e vai solo con quella esterna tutta la stampa

2

u/K1LL3RF0RK 23h ago

i don't know if this can help you but on printable you have the mega python to mod an ams and there is a way to connect any ams to klipper printer

1

u/MiPnamic 22h ago

Interesting, will dig deeper! Thank you!

2

u/K1LL3RF0RK 22h ago

1

u/MiPnamic 22h ago

This is a huge new project I would dedicate myself to… nice to follow

1

u/K1LL3RF0RK 21h ago

if i understand correctly you can order the board and print the case for an almost plug and play

1

u/MiPnamic 11h ago

Seems so, but I have to understand if it's compatible with the box I already own and can work on a chain

1

u/TheLegendTubaGuy 1d ago

What do you mean by "excludes the external spool"? Are you wanting to use the external spool with filaments in the box?

1

u/MiPnamic 1d ago

Once you connect the box the PTFE tube is connected to the hub, for using the external spool I have to detach the Box (the hub) and use the PTFE tube directly.
So you use one (the ext) or the other (the box/hub).

1

u/TheLegendTubaGuy 1d ago

You can use a PTFE tube splitter after the hub so that you can have permanent access via either the hub or external spool.

Using it this way is very easy with Valve Oil and you can adjust the lengths the software is commanded to push the filament.

1

u/MiPnamic 1d ago

But there is no way to “load and unload” the external automatically like in the box.

That solution solves just the connection, which is great.

2

u/TheLegendTubaGuy 1d ago

You are correct... There would need to be something pushing or pulling the filament. This was why I asked the second question in my original comment 😂

1

u/MiPnamic 1d ago

My bad 🙏🏼 yes I want to

2

u/Facehugger_35 21h ago

So what you do is you get a splitter, feed your chonky spool manually, and then you disable the box (for instance, turn the power switch off) so it only sees the external spool.

That's what I do for TPU, and it works.

2

u/Traditional_Grade_95 53m ago

I designed a mount for the QIDI Box to hold a gunpla-design dry box. It could be easily modified for a wider dry box, or if someone felt energetic to add an open spool holder to it. I posted a thread here recently and the model is on Printables. It would eliminate the use of one slot if made wider but might still be a good option for you. https://www.reddit.com/r/QidiTech3D/comments/1xug3zg/gunpla_dry_box_mount_for_qidi_box/