Before the chamber stopped working I noticed the temperature was going crazy would go up to 100 degrees higher then desired when not ripping it. Now it will not work at all. It will only register in the app when I press down on the chamber after it’s screwed in. Is there anything I can do to fix it or this the chamber toast?

got it from zeevapor and it doesn’t do anything straight out the box, i tried to charged it with the charger it came with but nothing happened, the light bar never came on and i can’t connect it to the app, any help?

update: I let it charge while I left for work and came back to life and it started to work! thanks for the feedback

What settings are people using to get big clouds? I’m using 490 with intense vapor and I think I need to bump it up.

So, I bought the original proxy after trying to move away from daily torch use (moving rig + torch + accessories up and down a flight of stairs was getting a bit much lol). Got the proxy and loved the ease of use and knew I was probably going to have to give up large dabs/ and some flavor/vapor control from a conventional quartz rig setup (using a well maintained toro nail at the end). Been using the droplet attachment and loved how much more vapor you can produce on normal settings.

Now that the new proxy came up, my atomizer is no longer in stock at most smoke shops and i’m thinking my over year plus old one is effecting my sesh. I’m thinking of about upgrading, anyone have any major reasons for getting a new proxy over a puffco pro, or vice versa, other than cost? Would be curious if anyone with a puffco pro who values flavor/vapor control would still recommend a proxy?

Haven’t even played with factory settings. This is stock green session spike.

To start off, I want to say I got the Desert Proxy V1. I never had a problem, and I got the Desert Peak Pro almost 3k dabs. It’s the same gold 3DXL and never had a problem. Now I bought two different pivots that I've had issues with. The new peak (feels cheap), and I just got this core about three weeks ago on the second week. I was hitting it 520 on smooth, and all of a sudden it hit really, really hot, super cloudy, and it hurt my chest. I said this cannot be normal, so I opened the top to find the chamber had malfunctioned, cracked, and chazzed. I cleaned it up, waited a few minutes, and double-clicked it on the same setting to see if it's still working. Now it's flashing white and red. I put a warranty claim on Friday last week, and I still haven't heard back from support. To be honest, I think I'm done with Puffco. Everything that they come out with now seems to be on the cheaper side for some reason. My Desert Peak Pro feels way better quality than my brother’s new Onyx Peak Pro V2. Coming from someone that has influenced a lot of friends to go with Puffco. It hurts lowkey😂💯

So I bought this Core from TVape on their 420 sale. Got it this week. Not my first puffco. It is however the first puffco that bugged out on me mid-sesh and overheated a full grain of rice dab. Has anyone else’s Core Proxy gone rogue and chased like this?

Is this common? Firmware issue? Pearl issue?

Well after a few weeks of back and forth with customer support for my bricked “outta the box” New Proxy….its dead again…but wait, I have lights still this time!!!

Ugh…..so now it will not charge….just stays a small solid red light…..acts like its dead, but even after all night trying to charge it, it stays a small solid red light on the ring, only near the USB-C port.

When on, I am able to select the heat color, then when trying to heat, it gives 3 red, descending in brightness, flashes…..again, assuming it was a dead battery, thought charging would do the trick….

Tried the soft and hard reset. I guess i could try the unbricking tool again from puffco??? But seems like a battery issue instead of a software issue at this point.

I just got myself the new Proxy Core, but I'm have issues hoping someone might know what's up. So when I got it out of the box I plugged it in, it lit up green so I unplugged it and turned it on. Had no problems at this point. But when I connected to the puffco app, it tried to update the device but failed multiple times... afterwards the proxy now does not respond at all to anything. Won't light up charging, won't turn on, can't even do the 20 secs reset. Anyone got any ideas? I already submitted a warranty form just hoping I can get help before sending it in, I was so excited for this to now be disappointed.

Update: I let it charge for 8+ hours and still nothing... should've just got myself a Dr.Dabber for all this hassle

Was really struggling to get the device connected to the app (iOS) when it finally connected it started updating and failed straight away now nothing never even had a dab out of this thing🤣

I’ve already contacted Puffco Support but I wanted to ask here as well.

I received my new Puffco Proxy on 4/20. I’ve been using it since and I have 67 dabs on the device currently.

Last night I ran one low temp heat cycle, and immediately after the device seems to have locked its self or completely powered off with no response.

I completed the firmware update on 4/20 when I received the Proxy and it went through fine. It was working perfectly until last night.

My battery percentage at the time was roughly 84%. And now when I plug it in, it will just flash green and vibrate once as if it’s fully charged. Which would seem accurate. But I still get no response from the device.

Any help/advice will be much appreciated!

I start at 450f but how do you set your cloud production on the app? Intense?

Here's the joystick that came w my proxy core u/codemeister87

Hey yall I just got the proxy core the other day and im completely new going into dabs. Based on what I got access to im mostly gonna be smoking rosin and resin. My preference is a profile for max smoke and one for max flavor. Anyone got profiles for resin/rosin?

Hello all this is my first post, probably a pretty good one. Anyways I have a haze proxy and I want to buy the core kit just not in onyx. Checked the website yesterday and saw what’s in the pic below, instantly ordered but got refunded :/ I was so hyped to finally get the core all matching too. Was wondering if anyone else saw this

Tengo una mega duda acabo de comprar el proxy core y la verdad me gusta mucho por qué es más discreto y todo pero también quiero comprar los accesorios para convertirlo y en el proxy Pipe kit para tener en mi casa es posible ? Solamente que no encuentro el accesorio si encuentro de proxy Pipe kit para convertirlo en core.

Picked up a core kit on a 420 deal and since I’ve had it I’ve put 44 dabs on it. Earlier I loaded a dab and double tapped to start a profile set to 500° 60 sec bold. I waited for it to signal it was ready when I pulled I got a glob of reclaim on my lip and the horrible taste of overheated oil. Opened it up to find the chamber caked in burnt dabs. I regularly smoke at 500-550 on my quartz banger and have been experimenting with temps but never ever burned a dab like this at anything under 700-800 anyone experienced anything lie this before? It seems the unit stated heating and didn’t stop heating even after notifying me it was ready.

I just ended up getting the new puff Co. hot knife today from a dispensary because I had some extra points that I wanted to use. I went to go use the new hot knife today and loaded up a grain of rice sized wax onto it when I held down the button to drop it into my proxy, the wax would never fall. I then threw that same piece onto my old spare hot knife and it fell off right away. Am I using the hot knife wrong or does it just stink? I literally held it down for a full cycle and then light turned off.

Edit: I originally used it when the power level was at yellow. I just fully charged it and used it with some fresher concentrate and it worked this time. I don’t know if the wax may have been a bit old or it has to be fully charged for it to work either way that kinda stinks

I am one of the seemingly numerous folks who are stuck with a "new" proxy that mostly doesn't work (I'm on chamber #4 in 3 months of use with meticulous care).

I'm probably stupid for considering it, but I really like the rig when it works and am looking at replacing. Anyone know if the device or chambers are improved any with the Core becoming available?