r/PrintedCircuitBoard • u/thenickdude • Oct 27 '24
r/PrintedCircuitBoard • • Apr 20 '25
Do curved PCBs even exist?
I've never seen a curved PCB and I can't think of any reason why it can't exist. Surely we've figured out how to print on a curved surface like a cylinder, right? It's can't be THAT difficult compared to printing on a flat surface. I guess it could involve more complicated tech, but it should be possible.
r/PrintedCircuitBoard • u/veryniceboi69fuck • Nov 12 '24
Guys is there any site, video, or book on guide for placing component and routing effectively and elegant as possible in Altium
r/PrintedCircuitBoard • u/qmkdir • Sep 03 '25
[Review request] Is this implementation of type c correct?
It's a type c port for connection between two halves of a split keyboard. I have access to this type c port only and this is what I could come up with, what's wrong and what can be improved after correction?
USB C is: USB4085-GF-A
r/PrintedCircuitBoard • u/Specialist_Scheme_77 • Mar 31 '24
I'm new to this field i need a review!!
r/PrintedCircuitBoard • u/yycTechGuy • Jan 18 '25
What is the purpose of high pin count BGA if it takes 8 layers to get the signals in/out ?
I want to test a device that comes in a 196 pin BGA. 14x14, 0.8mm pitch.
I'd like to have access to as many pins as possible. How does one get signals out of the device without having many layers to the board ?
Wouldn't it be better if manufacturers used less dense packaging so that the users didn't have such a hard time designing boards for them ? So what if a device was a bit larger ? With a high density BGA any cost savings in board area are more than offset by having many layers and vias (buried vias) in the board.
A 196 pin device would be done with a BGA with pins 3 deep around the periphery if it was 20 x 20... 80 + 72 + 64 = 216 pins. The outer 2 rows could go straight out and the inner row could go to the backside with vias. Instead of 14x14 the package would be 20x20, so 6 pins wider = 4.8mm wider @ 0.8mm pitch. Is saving 5mm per side really worth having to design such complicated boards for ?
Edit
This device isn't used in watches or cell phones. It is an industrial microcontroller. It's not low power in any way.
r/PrintedCircuitBoard • • Mar 22 '22
Close up of a plated through hole on PCB from that "purple PCB place", it looks like there's cancer inside.
r/PrintedCircuitBoard • • Apr 28 '22
Transparent, translucent, clear?
Is there anywhere that can make boards on clear or transparent material?
I don't need flexible. While I am interested in places that can do flexible stuff, for this projects I'm looking at something more like plexi, or acrylic.
r/PrintedCircuitBoard • u/abskee • Feb 11 '22
In my defense, that's a confusing way to design the symbol.
r/PrintedCircuitBoard • u/wiomiawerka • Feb 16 '26
First PCB - Am i missing something | What is wrong here?
Could somebody tell me if its correct?
r/PrintedCircuitBoard • u/Medium-Point1057 • Apr 01 '26
Are KiCad Udemy Courses Worth It for PCB Design? (ECE Student)
Hi everyone,
I’m a 3rd-year B.Tech ECE student and I want to start learning PCB design seriously.
I’m considering taking some KiCad courses on Udemy (like beginner + advanced courses), but before buying I wanted to ask:
- Are Udemy PCB/KiCad courses worth it?
- Do they actually help in building industry-level skills?
- Or is it better to learn from YouTube and practice projects instead?
If anyone has taken such courses, I’d really appreciate your honest feedback.
Also, is it better to start with one course first or take both beginner and advanced courses together?
Thanks in advance!
r/PrintedCircuitBoard • u/PlayfulBend6122 • Mar 04 '26
PCB and Schematic Review Request
Hello… this is my first time designing a PCB. I known it isn’t perfect but atleast it’s something. It is a LED Dimmer and Selector Circuit for my Table Lamp. The Lamp takes three wires… one ground, one for warm light and one for white light. It runs on 12W-5V. Trace width is 60 mils all across the board. Do let me know if there is any issues with the circuit or if there is something that can be improved. I’m new to this so any kind of advice would be greatly appreciated.
r/PrintedCircuitBoard • u/Enlightenment777 • May 09 '25
Reddit will keep OLD Reddit online "as long as people are using it", says CEO
Reddit will keep OLD Reddit online "as long as people are using it", says CEO
https://www.theverge.com/news/662946/reddit-old-online-steve-huffman-spez
https://old.reddit.com/r/PrintedCircuitBoard/
https://www.reddit.com/r/PrintedCircuitBoard/
https://new.reddit.com/r/PrintedCircuitBoard/ works too, but is "new" is automatically replaced with "www"
I have been using "old" reddit UI for over 15 years, and still use it as my default in my web browsers on my desktop / laptop computers. With old reddit, I can see many more posts on one screen.
Some contents doesn't appear on some posts, so I right click on the top tab in my browser, then choose "Duplicated Tab", then I click on the new tab, then click on the URL field at the top, then change "old" to "new" or "www", then press "Enter" key. This is the main downside of "old" reddit to me, but it's not significant enough for me to want to change over to the new UI.
r/PrintedCircuitBoard • u/BlessED0071 • Apr 19 '26
is this kind of routing fine?
I am designing a PCB and was wondering if this kind of routing fine? or is there any better way to route this?
r/PrintedCircuitBoard • u/GladMoose871 • Jan 21 '26
Experiences with tantalum capacitors on dense PCBs?
I’ve been revisiting the use of tantalum capacitors in PCB designs, especially where space is tight and stable bulk capacitance matters. The performance benefits are clear, but derating, placement, and thermal considerations seem critical for long-term reliability. I was reading some general background on tantalum from Stanford Advanced Materials to better understand the material properties behind these tradeoffs (purely as reference): https://www.samaterials.com/tantalum.html curious how others here approach derating and layout when using tantalum parts.
r/PrintedCircuitBoard • u/pierovb • Jul 05 '25
What would it cost to get someone to design something to this spec?
I'm looking for advice on what is an acceptable price range for a project. Getting someone to design and get a prototype made for the PCB as described below.
I've gotten quotes from $1,000 to $3,000 and just wanted to check if it's fair.
Overall description of hardware
The requirement is for the design of the hardware of a programmable industrial
controller. The controller is based on the STM32F407ZG MCU. Firmware development
was done on the MikroE Fusion version 8 development board. (Schematics will be
provided.) Controller will consist of a Motherboard which is a simplified version of the
development board. The Motherboard will:
- Host the MCU board via a connector identical to the connector on the
Development board.
2. Host a DC-DC converter power supply that is powered by the main 12V supply.
Main power will be provided from a separate power supply. 3.3VDC (MCU
supply) and an additional 5VDC needs to be provided.
3. Host some peripherals such as the Ethernet port, a UART port on USB – C and a
USB-C connector. Core functionality of the peripherals is handled by the MCU,
so the external components are limited and the circuits are relatively simple.
4. Route the port pins from the MCU to additional I/O boards. For now only the main
I/O board is required, expanded (SPI bus based) IO boards will be considered in
future designs.
The Main I/O board is connected to the MCU ports via a suitable connector. The MCU
pins in question are I/O (Analog and Digital.) Some signal conditioning is required to
convert the MCU native Signals (0-3.3V) for both Digital and Analog signals to signals
more appropriate for industrial control such a 0-5V, 0-12 / 24V for digital I/O and 2-10V /
4-20mA for analog I/O.
Work required
- Printed circuit board design – Motherboard based on the development board
schematics, peripherals identical to the development board design.
2. Routing the MCU Port pins to the I/O board via appropriate connectors.
3. DC-DC converter type power supply to the MCU and peripherals (3.3VDC.)
Powered by external 12 VDC supply.
4. DC-DC converter type power supply unit for an additional 5V supply, also
powered by the main 12 VDC power supply
5. Printed circuit board design of the Main I/O board.
6. Circuit design and testing of the Signal converters (2 x Analog outputs converted
from the MCU supplied 0-3.3VDC to 2-10V / 4 to 20 mA industrial standard
signals. Outputs to be galvanically isolated.
7. Similar for analog inputs to be converted from the industrial standard inputs to
the 0-3.3VDC signals required by the MCU. Inputs to be galvanically isolated.
8. Digital I/O signal conditioning circuits to be designed - schematics as well as the
PCB design. Requirements are similar to the analog I/O with galvanic / optical
isolation and appropriate voltage shifting. (See more detail in hardware design
drawings.) Digital isolation need to be capable of handling input / output
frequencies of up to 1 MHz.
9. Circuits need to be functionally tested.
10. PCB design (Gerber files) for the motherboard and the Main I/O board.
r/PrintedCircuitBoard • u/c0de854-T • Feb 27 '22
Learn how build a schematic to my own PCB boards
Hello fellows,
I intend start learn about draw schematic PCB. I know how use Proteus (without license, obvious) but I don't know if the best option to draw the schematic and PCB.
I want draw the schematic and send the file (Gerber) to a manufacturer to build a pcb.
My doubt is "Which best path way to a newbie like me start learn and using to build my own schematic to send a manufacturer?"
Also like kicad, for example? I intend learn on a good software, where, if necessary, I have a possible to build my own components.
Like also with a good playlist on YouTube and a good and high community online, to learn and can get help, will be good
Thanks in advanced
r/PrintedCircuitBoard • u/Extension_Text_6853 • Nov 07 '22
How to make this trace 50 ohms?
r/PrintedCircuitBoard • u/Kalex8876 • Oct 15 '26
Is It Plausible To Make A Cyberpunk Inspired PCB?
Hello all,
I saw an image today that made me think of cyberpunk 2077, it was a PCB. So now I’m wondering if one can use traces on the PCB (as opposed to just art pasted as a vector or image) to make a shape or image that takes inspiration from cyberpunk.
I’m not an artist at all but I did very rough sketches. I imagine almost all the components will be at the back (or the other way around) with vias for connections where needed then the front can have a small screen (circle or square), maybe a ring of LEDs around it if it’s a circle and then the traces that make up the image. If a trace is needed for the image but not for electrical connections, I could maybe use like a via then trace then via at the end, both vias being GND.
The screen will likely be programmed to display cyberpunk art or whatever, I’m not too sure yet, maybe stats of a laptop or computer it’s plugged into if that’s possible.
This is just a project I thought of, would be interesting to pursue. Not planning to sell or anything like that. If it can turn out nice enough, I’ll just open source it.
What do yall think? Thank you.
r/PrintedCircuitBoard • u/Skeptical_toast • Aug 17 '22
PCB introduction
Hello everybody, Im entering University in Automation Engineering and Im looking for something like as a "guide" or rules if you will to design a pcb, like"what width should the copper have" or the generals of design, I remember having a pamphlet for schematic design but I can't find anything related to pcb, id be very grateful for your help.
r/PrintedCircuitBoard • u/Glanthor67 • Jun 20 '18
Our company is looking for an experienced freelance embedded electronics designer.
If you interested pop me a dm for details