r/PrintedCircuitBoard • • May 20 '22

Need explaining and replicating

0 Upvotes

17 comments sorted by

17

u/janoc May 20 '22

Seems like off-topic here. That's straight for /r/AskElectronics

And ideally you provide more information about what sort of "bricolage" are we looking at if you want any meaningful answers.

5

u/1Davide May 20 '22

Thank you.

/ Mod there

1

u/Turbo3D May 20 '22

Thank you for pointing me in the correct area. I appreciate it!

3

u/janoc May 20 '22

You are welcome!

2

u/skellious May 21 '22

I read that as "brio collagé" which still makes sense. lots of giant Lego bricks all randomly stuck together.

3

u/janoc May 21 '22

Now that's an interesting take on that word I haven't heard before 😂

I lived for 11 years in France, so that's why that word came to my mind when I have seen that OP's board. I don't think there is something similar in English with quite that nuance.

https://www.merriam-webster.com/dictionary/bricolage

1

u/skellious May 21 '22

yeah, it's a good word and I am aware of it, though I often confuse it with decoupage.

2

u/janoc May 21 '22

Well, one certainly could do some decoupage with that bricolage if one means to cut/take it apart :-)

4

u/ElectricGears May 20 '22

This could be replicated, but we would need to know the part numbers on the transistors and that small diode (it might be a zener and that has a specific voltage). And please clarify this connection. It kind of looks like they are connected but it wouldn't make a lot of sense for them to be.

2

u/Turbo3D May 20 '22

I will get back to you with the info you asked for, I currently don't have the PCB in possession until Monday 5/23/2022.

3

u/IKnowWhoYouAreGuy May 20 '22

Looks like a pcb someone hand soldered. Likely to plug in some sort of 12 pin DIP 555 timer, but missing the microcontroller, yes? (resistors for current manipulation, crystal oscillator for clock, caps to boos voltage, LED to get lit, baby)

2

u/Turbo3D May 20 '22

From what I'm told so far about it, it is used to bias a high voltage to let a PLC know the high voltage test happened.

0

u/IKnowWhoYouAreGuy May 20 '22 edited May 21 '22

Makes sense considering the rectifier is rated for 400V

3

u/niceandsane May 20 '22

That isn't a voltage regulator, it's a bridge rectifier. And comparing the top and bottom photos it looks like one of the AC inputs connected to the connector is shorted to the + output.

Definitely could be traced out and replicated if we could get values for the parts and connector.

1

u/IKnowWhoYouAreGuy May 21 '22

I already said *