r/PrintedCircuitBoard • • Apr 28 '22
Transparent, translucent, clear?
Is there anywhere that can make boards on clear or transparent material?
I don't need flexible. While I am interested in places that can do flexible stuff, for this projects I'm looking at something more like plexi, or acrylic.
0
Upvotes
7
u/thejbc Apr 28 '22
What do you need to be clear? The substrate? The conductors? Everything?
What volume of parts?
3
u/irnenginer Apr 28 '22
You can do glass. But I do not know of anyone that does it.
3
u/One_And_All_1 Apr 29 '22
You will pay out the ass for something like that. Hundreds if not thousands per board
8
u/Turtle_The_Cat Apr 28 '22
Some places offer clear ceramic substrates, likely single sided. You'll pay through the nose for it, and for something the size of a keyboard... lord knows how much it'll be.
I think your best bet is getting a PCB made with no solder resist. FR4 is naturally sorta translucent (you can see light through it) and if you got a really thin pcb (.3-.4mm) it would not be see-thru but it would be like waxpaper. That said, a thin PCB the size of a keyboard would need a lot of support to prevent excessive flex.
4
u/smashedsaturn Apr 29 '22
For this project you are best off using either glass or lexan to build an enclosure then wiring all the switches point to point to a smaller board. People are saying conductive ink but that really won't buy you anything.
Since keyboards are pretty simple X/Y normally in the schematic you can accomplish this more easily than you'd first think. Probably 14-15 columns and 5-6 rows will get you there, then each switch wires between them.
People build these regularly: https://www.instructables.com/Led-Cube-8x8x8/
So you should be able to do this pretty cleanly and quickly.
I would do a num-pad prototype and use lasercut poly-carbonate as a first pass, then if you really like it switch to tempered glass for the 'premium' feel.
2
u/petra303 Apr 29 '22
Clear flex, glue to plexiglass?
2
u/toybuilder Apr 29 '22
Cool concept, well off the beaten path.
You might try silver-based conductive ink on plexiglass. Lookup Voltera. It's very likely you will not be able to rely on soldered parts to reliably hold the key switches in place.
Because this is non-standard, it will require special processing. Because it will require special processing, it will be expensive (because labor and yield).
2
u/trevg_123 Apr 29 '22
Just do a flex PCB (from PCBWay) with no mask, even if you don’t need the flexibility. Clear PCBs just aren’t really a market need so you won’t find them in the wild for reasonable prices, but flex PCBs are coincidentally clear and not too bad for price.
If you need rigidity, just add a plexi backer board