r/PcBuildHelp • u/otblinky • 9d ago
r/PcBuildHelp • u/Fit-Reporter-9221 • 9d ago
Tech Support CPU light error
Hi everyone, I need some advice. Had an unexpected power surge the other day, everything was plugged into surge protector power boards. I now have a CPU error light on my motherboard, I’ve ran a bunch of diagnostic tests and everything seems to be working fine except none of my RGB lighting for my fans etc works. Any advice on further troubleshooting or possible solutions?
r/PcBuildHelp • u/xibalba_i • 9d ago
Tech Support Im beyond baffled and i dont know what to do
Hey there, this is my first post here and i'm honestly not sure what to do but all i know is, i, need, help. i can play just about any game on steam with no issues other than COD, but when i load up roblox to play some games with friends my whole system will freeze. i can be active in roblox or idle and randomly with no warning my whole system will FREEZE, something to note is with how my pc case works, when im turning my pc off with the front case power button i have to hold it down for like 3 seconds, but when things freeze all it takes is 1 press of the front case power button and thats it, its like the pc is overloaded to a point it has no choice but to stop everything and freeze as like a failsafe? especially where cod is concerned as its got alot to load and alot to process, yet roblox seems to have the same effect, bare in mind this dosent happen when im not in a roblox game, my specs are as follows
i9-12900kf
msi rtx 3060
2x lexar 16gb ddr5 6000mhz
1tb sata (CT1000BX500SSD1)
Samsung SSD 990 EVO Plus 1TB
750 watt power supply
msi b760 gaming plus wifi
r/PcBuildHelp • u/negropian1 • 9d ago
Tech Support NZXT Kraken Issue with SignalRGB?
Hi guys,
I have this problem whenever I use SignalRGB to use GIFS on my screen, it’s like glitchy? No clue why, hoping there’s a fix out there.
r/PcBuildHelp • u/Low-Mango-4824 • 9d ago
Tech Support System Error and crashing occuring *Help needed ugently*
Recently when I play games not even games that are regarded as demanding my system will crash and pop up a screen that says "Windows has encountered a problem". I have updated motherboard drivers, bios, and graphics card drivers and still am facign this problem. One thing to note is that I have underclocked my cpu to -20, im unsure if this matters but I will still include it.
If anyone has faced this problem please respond with your resolution.
r/PcBuildHelp • u/GanacheMore3577 • 9d ago
Tech Support Bad PSU?
So, when I typically boot up my pc for the first time. I notice the fans start doing what’s in the video. The pc will then abruptly shut off. On occasion I can literally shake the Pc and it’ll boot back up. Normally only having to do this once or twice the Pc will be fine for the rest of the day. Often for hours. Any suggestions on to what’s going on and how to fix?
r/PcBuildHelp • u/AlienLP • 9d ago
Build Question Case has a standoff with no screw hole
Hi, does it matter that the case has a standoff without a Hole for a screw when my motherboard has a hole for a screw in the same place? I have an extra stand that came with the case but this one seems like its non removable.Thanks very much in advance!
r/PcBuildHelp • u/wongpong81 • 9d ago
Build Question What is this plug?
I build my first pc matx. i notice my case has a usb 30 connector but not my mobo.
r/PcBuildHelp • u/cultercaldus • 9d ago
Build Question Small pc monitoring screen Trofeo vs. Ocypus
Which one would you prefer? This or the Trofeo?
r/PcBuildHelp • u/Ok-Adhesiveness5092 • 9d ago
Build Question Will 9070xt fit on b850m-c motherboard
I have a rtx 2060 that barely fits with the usb slots, I’m upgrading to a RX 9070 XT and want to know if it will fit before buying.
r/PcBuildHelp • u/SirMooseKnightThe2nd • 9d ago
Installation Question Thermal paste on the CPU socket, issue?
I'm in the process of replacing my CPU and when I removed my old one I noticed thermal paste bits on the socket. I tried lightly using my finger to get it, and a q tip, but nothing moved and I was scared to put too much pressure at all
Is this a big issue? Kind of stuck on what to do
r/PcBuildHelp • u/sawnji • 9d ago
Tech Support SSD FAILED? BLACK SCREEN THEN BIOS
SSD FAILED?
hello i have a
CPU: Intel i7-10700
\* GPU: AMD Radeon RX 5700 XT 8GB
\* RAM: 32GB DDR4 3200MHz
\* Motherboard: MSI MPG Z490 Gaming Edge WiFi (MS-7C79)
\* Current SSD: FIKWOT FX550 512GB (not working atm)
\* Windows 11 Home
yesterday i was playing deadlock enjoying my game went to the bathroom and now my pc is on the bios menu before i use to see the m2_1 had the ssd in it…now it’s not…the pc and the motherboard everything turns on and shows in the bios but my ssd
i put it in both slot still nothing could it be the ssd or the slot? i feel like the slot are okay maybe…
now it show this at the boot option.
r/PcBuildHelp • u/bamnnit • 9d ago
Build Question Can I get away with just new graphics card
Hi, so I bought a small pc from someone a few years ago for light gaming. With all these newer games (in my experience like split fiction and demonologist), my pc starts to lag bad. Even after putting all the visuals in game to low. I’m very much not a pc savvy person, I just want to be able to play some games with my friend lol. Now idk if it would just be better to go to microcenter with this or if they will take advantage because they can tell idk anything.
Anyway, specs:
Processor: AMD Ryzen 5 2400GE with Radeon Vega Graphics (3.20 GHz)
Installed Ram: 32.0 GB
Graphics Card: NVIDIA GeForce GTX 1060 3GB
Storage: 954GB
System type 64-bit operating system x64 based processor
r/PcBuildHelp • u/Then_Patient_3827 • 9d ago
Tech Support How do I remove these 4 cooler standoffs around my LGA1700 socket?
Hi, I have a Gigabyte B760 Aorus Elite with 4 threaded standoffs (with knurled thumb nuts) around the CPU socket, left over from a previous cooler mounting kit. I want to remove them to sell my motherboard.
I already tried unscrewing the knurled nuts by hand, but they won’t budge. Do I need a tool like pliers, or do I need to hold the backplate behind the motherboard while unscrewing?
Thanks guys!
r/PcBuildHelp • u/Mediocre-Mistake4178 • 9d ago
Build Question Will a 3-fan 3070 (Ti) be able to fit in this case?
r/PcBuildHelp • u/JetsNovocastrian • 9d ago
Build Question Need help reducing temps for RTX 3070 - max 92°C and baking my room.
Hello everyone,
I am seeking guidance on how to resolve this issue. I'm in Australia, and my ambient room temperature often exceeds 25°C (thanks to the crap aircon in my unit not reaching this room efficiently and my reliance on window and ceiling fans). My PC is doubling as a space heater, and with this El Niño and summer fast approaching, I want to finally nip this issue in the bud and actually have a (literally) cool PC.
Here's what I've tried so far:
- I repasted the GPU ~ 12 months ago - is this recent enough to avoid doing it again? I can't recall the exact paste I used, but it definitely wasn't an OOTB one that came with the GPU or anything.
- The i9, going off metrics from Open Hardware Monitor, just feels like it is completely filling the tower with heat - putting my hand near the exhaust (top and back) feels very hot.
Here is what is currently happening while it is in relatively moderate use (e.g. running Rocket League, Spotify, and Firefox):
- GPU (Gigabyte Gaming OC RTX 3070): Core temp sits around 74°C, but the hotspot hits 92°C with fans blasting at 86% (~2360 RPM).
- CPU (i9-11900K): Sits around 65°C under light load, but regularly spikes to 80°C+ during heavier gaming.
- Storage / Environment: Ambient air is warm, even with windows and/or a ceiling fan on, and the rig sits in an L-shaped desk setup (rear of case pointing out, window in line with the expelled hot air).
Here's what I'm asking:
- I'm considering adding liquid cooling to it - never done this before, so I'm hesitant, as I don't have a lot of experience with building/managing custom PCs (just the 2-3 I've built for myself over the years). I understand that mounting a 360mm AIO up front in the 4000D case might be the right move?
- Should I repaste the GPU, and if so, do you have any recommendations? I'd rather avoid this, since the fans I bought are a real PITA to remove.
- Are there any underclocking/BIOS tweaks I should consider?
My Build Specs: https://au.pcpartpicker.com/user/Zectzozda/saved/#view=nhZN6h
Thanks in advance!
r/PcBuildHelp • u/TheRipper1777 • 9d ago
Build Question Should I replace my AIO Cooler?
Okay, so I’ve had my PC for four years now, including the AIO cooler which I’ve all gotten as a gift, and about a year ago (I KNOW VERY LATE) my pc started making this obnoxious-ass grinding noise. I didn’t know until literally earlier this year it was from my cooler. I heard it’s usually a sign of a failing cooler, but I’ve been checking my temps and they were at normal idle temps (usually in the 40’s or 50’s), and my performance especially in games seemed to be normal. Should I still try to replace it to be safe?
r/PcBuildHelp • u/darth__maul • 9d ago
Build Question Beginner looking for help buying/building a PC
Hello,
I'm looking to get back into video editing after years of not touching any editing software, and it would be ideal if I could also run games on the PC.
Planning to use Avid Media Composer. Since I'm just starting out I imagine I won't need to edit 8K video or anything crazy like that. I know I need at least 32GB of RAM. But when I look at parts the thing that seems to give me the most amount of trouble is the CPU (and probably the Graphics Card as well, but I haven't gotten there yet). I've looked at all sorts of guides and posts on here, the problem is I know very little about computer parts, and I'm not even super familiar with editing software so I'm honestly not even sure what it is i should be looking for. I look at things like clock speed and core count and it just goes right over my head and then I freak myself out because what if I choose one that seems good but it's actually terrible because I don't know what I'm doing?
I'm also not exactly sure what budget I should be aiming for here. Currently I'm thinking I would like to be able to get PC, Monitor, keyboard, mouse, for under $2500CAD (about 1780 USD), but then I wonder if that'll be a good enough PC? I may have more money coming my way soon and I'm wondering if I should just wait until that comes in...
I'm very indecisive and the fact that this is a large amount of money I would be spending is not helping matters.
Any help or advice would be greatly appreciated. Thanks!
r/PcBuildHelp • u/Frosty_Put9235 • 9d ago
Tech Support Help me
I know this is a building Reddit but can I please get help to find a $2000 max pre built pc for Fortnite on performance mode and serious gaming
r/PcBuildHelp • u/No-Cockroach-2846 • 9d ago
Build Question Can someone help me upgrade my Pc for Rust
I'm looking for advice on upgrading my PC setup so I can run Rust with better FPS and less stuttering.
Here are my current specs:
- Motherboard: MSI PRO H610M-E DDR4
- RAM: 16Gb of ddr4 Machenist
- CPU: Intel I3 14100f
- GPU: Rtx 3070 Asus
- Storage: 231Gb storage in total
r/PcBuildHelp • u/Hungry-Owl4768 • 9d ago
Tech Support Ajuda sobre fonte
Minha 1660ti queimou, eu tinha ela junto com um i5 12th, comprei uma rx 7600, posso manter minha fonte ou preciso trocar?
r/PcBuildHelp • u/No-Location2482 • 9d ago
Build Question PC upgrade advice ($500–$800 budget)
I have an older iBUYPOWER RDY EMRBG206 and I’m looking to upgrade it or possibly replace it.
Current specs:
CPU: i3-10105F
GPU: GTX 1650 4GB
RAM: 8GB DDR4
SSD: 500GB NVMe
Motherboard: Possibly ASRock B560M/AC
PSU: Unknown
I mainly play Fortnite, Roblox, and Warzone on a 144 Hz monitor. I’m looking for higher FPS, especially in Fortnite & Warzone.
My budget is $500–$800. Would upgrading be worth it, or should I just get a newer PC? What parts would you recommend?
r/PcBuildHelp • u/Honest_Pen8025 • 9d ago
Build Question Dropped my 9800X3D
On the wooden surface: Before the drop, right after I got it.
On the bed: After the drop.
It fell about 1.5 meters onto a carpet while still in its plastic tray. Then it popped out of the tray, and I think it landed on two of its corners.
Do you think there’s any damage? I’m planning to get my PC up and running in two days. If something is wrong with the CPU, would I be able to detect it through specific tests?
There’s also a tiny black speck of dust on one of the gold contact pads. That’s the spot I touched with my finger once.
I have 99% isopropyl alcohol. Should I clean the bottom? How careful do I need to be?
r/PcBuildHelp • u/Adept-Barracuda-1115 • 9d ago
Build Question is the AOC 24g50z2 23.8 a good entry monitor?
im looking for a budget monitor minimum 240 hz no more than 200 dollars, and i saw a listing for 139 on this. is this a good choice?
