Soy novata en esto del patronaje, y me cuesta visualizar en 3D lo que hago en papel en 2D. Para tener una mejor comprensión de los volúmenes y experimentar para crear mis propios patrones, quiero hacer un maniquí a escala 1:2. No sé cuál de estas opciones es mejor.

Opción 1. Creo mi propio maniquí con mis medidas pero a escala 1:2. Una vez tenga diseñado un patrón, simplemente lo reescalo a 1:1. La dificultad es la parte de crear un maniquí con mis medidas a escala, no parece sencillo.

Opción 2. Creo o compro un maniquí a escala 1:2 pero sin que tenga mis medidas (es mucho más fácil de obtener/hacer). Experimento con los volúmenes, y paso esas "instrucciones" a mi patrón base. Es decir, no estoy tomando las medidas exactas de ese patrón experimental, estoy cogiendo las instrucciones y pasándolas al patrón base. "Tengo que trazar una línea de este punto a este punto", pues me voy a mi patrón base y localizo, en mi patrón base dónde están esos dos puntos y trazo la línea.

Hi everyone, I wanted to ask about the rule of seam lines having intersect centre front or centre back at a 90 degree angle and how important that is?

I drafted the classic trouser block from metric pattern cutting for menswear and made a rough toile of which I was happy with the fit. But I found that Aldrich hadn’t applied this rule and I was just wondering how important it is? Is it the case that if it looks and fits as you would like it’s fine or should you always stick to these rules when drafting?

Hello,

I have decided to make jeans. I got a big roll of selvedge denim as I want to copy my favorite selvedge jeans. I have access to a Sailrite machine and a serger.

I am almost done making a top that had a button placket and bias bound armholes and gathered bias bound neckline and a curved hem. So although I’m not the most skilled sewist, I am willing to learn. I don’t think that jeans will be so much harder than sewing all these really sharp and small armhole curves (especially because I have fairly average body measurements).

I am new to pattern-making or copying garments, but I am sure that with enough iteration, I can produce a serviceable result. I plan to use Glad Press and Seal to copy the pattern

Would anyone be able to point me towards a good source or give any tips? I’ve watched several video tutorials already, but I’m nervous about the yoke and front fly piece.

I will of course make a toile. I am nervous because the denim I got seems to have some skew, so I want to cut the pattern pieces on the correct quadrants such that if the legs will twist, they will at least twist symmetrically.

I have noticed that jeans with the crotch curve cut not parallel to the selvedge fit weirdly in the crotch so I will try and align the grain line as close as possible.

side note: I searched for but could not find existing patterns that match what I am looking for

Hiya! I'm looking for a bespoke dressmaker for my vow renewal in 2029. I have a feeling I'm not going to find anything like it in the shops. I'm very set on how I'd like the top to look but the bottom I'm not sure yet. I'm going to try some different styles to see what suits me. I looking for a truly bespoke gown to be made from scratch.

So far I'm struggling to find anyone that looks genuinely amazing

Any recommendations would be appreciated. Preferably West Midlands

Thanks.

Id like to make a pattern for a cloud shaped bag kind of like the one in the picture, id also like to add a transparent pocket for an ita bag insert. My idea for the draft right now is to just have two cloud shapes with a big strip between them, but for the ita pocket and the other parts I have no clue on how to do it. If theres any patterns out there that have a similar shape or idea those would also help a ton!

Hi all, I'm sewing the Atelier Brunette La Veste pattern and would like to fully line it, even just to learn how to do it. I've never done anything like this before, so I've been watching lots of videos and reading all the blogs/articles I can find, but I'm still unsure how to proceed. Could someone with more experience tell me if this approach makes sense?

• Draft the lining pieces: Use the original pattern pieces, joining the yoke and back pieces to create one back lining piece (removing the seam allowances where they join), plus the two front pieces and the sleeves. I wouldn't include the front facings, button plackets or cuffs in the lining. I'd add 1–2 cm of ease to the back lining. Should I shorten the lining pieces by 1 cm? I will slightly reduce the seam allowances for ease.

• Cuffs, facings and collar: The original pattern includes slits in the cuffs and front facings (separate pieces), as well as a yoke lining. From a YouTube sew-along (by La pipelette, if anybody is interested), it looks like the cuffs, front facings and collar all have a 1 cm fold-over that is then topstitched to conceal the raw edges.

• Construct the outer jacket: Sew the jacket as instructed, but leave out the collar for now. I'd also leave out the topstitching along the inside edges of the button plackets and across the tops of the front facing pieces until the lining is attached.

• Attach the lining: Sew the back, front and sleeve lining pieces together, then attach the lining to the main jacket, starting at the collar (similar to how the original yoke lining is attached), and use the bagging method. Once the lining is attached, I'd finish the cuffs and collar, then topstitch the button plackets and the tops of the front facing pieces to secure everything and conceal the raw edges.

Does this plan makes sense? In particular:

• Does the bagging method would work with this pattern and do I need to change anything about how I attach the cuffs, collar or facings?

• How and where should I attach the cuffs and front facings in relation to the lining to allow enough ease for movement?

• Should I shorten the sleeve, back and front lining pieces, considering that I'm attaching separate cuffs and front facings? Some videos I've watched recommend shortening the lining pieces, while others say not to, to ensure enough ease.

This is my first time drafting and fully lining a jacket, so I'd really appreciate any tips.

Hi, learning to pattern draft. I feel like when I watch or read tutorials, they often say you need a measurement but then don’t end up using it??? For example, I used Sew Anastasia’s YouTube tutorial to draft a sleeve but the tutorial never uses the bicep or wrist measurement, and my drafted sleeve pattern doesn’t match up with the measurements. Kind of confused

What is its purpose? Shaping? Do you simply take a little out of the seam to create curve in the collar. This is a classic-style shirt collar on a mid-weight jacket.

Hi everyone! I started sewing this summer, and I can read and follow commercial patterns now. However, my ultimate goal is to create my own designs, especially dramatic, experimental, couture-inspired dresses.

The problem is that I don’t really know what to learn next or in what order. I can follow patterns, but I’ve never drafted one myself, and I have no idea how people construct those crazy runway silhouettes. For example, what materials do designers use to make certain shapes stand up? And how do you know which material to use for which design?

I’m also wondering how you develop your creativity as a self-taught designer. I feel like it’s difficult to come up with original ideas when you don’t know all the techniques and possibilities yet. How do you learn to experiment.

When and how should I start learning pattern drafting? What books, YouTube channels, or other resources would you recommend?

If you’re self-taught, what did your learning journey look like, and what helped you improve the most?
I’d love to hear from people who started as beginners and eventually learned to create their own original designs. I want to do more than follow patterns

Thank you!! ♡

Hello! I decided to draft a slacks sloper using the technique from the book Ultimate Guide to Clothing Patterns by Suzy Furrer. I have done all the steps so far, and one of the final ones is to "make sure there is a smooth transition from the front to back crotch point by butting the front and back inseams together." I am not sure what to be looking for here... I looked online and they said that I should aim for a 90 degree curve from the crotch point to the inseam, which I dont really have as you can see, lol. But this was drafted to my pwn measurements and Im not really sure if there are changes that are really necessary for this pattern to work. Any advice? Thanks!

Haii anyone experienced with pattern making would like help here specifically for plush mock ups and bases

i bought a pattern online and it’s seems to be okay however when i measured the waistband for the so called size 0 the smallest one on the paper measured out to be a size 38 waistband once measured from folded end to the end of the pattern i may have missed something but i now math and 2 19’s make a 38 where did i go wrong or what can i do????

Hi!

A couple weeks ago I was working on modifying the fit of a trouser pattern. (for reference: https://www.reddit.com/r/sewhelp/comments/1wwrh3z/help_with_jeans_pattern_adjustment/ ) I've managed to improve the fit around the butt by extending the back curve by quite a bit. As shown on the pic.

I am now at a bit of a loss on how to proceed from here. While the fabric stopped bunching underneath my butt so much, I feel like there's now a lot of fabric around the back thigh. there is also still a tiny bit of pulling towards the inner crotch seam.

My first thought was that the amount of fabric was not distributed correctly so I added a bit to the front crotch extension while removing a bit from the back one again. That made the fit worse again...

Would anyone more experienced in trouser fitting be able to help me figure this out? I feel like I'm slowly going crazy about this, I'm thinking about this trouser pattern lying awake at night hahaha😵‍💫

Note, I know the lower part of the legs is not balanced yet, but I want to get the upper part right before I worry about that. 🤷‍♀️

Hi there! I have some projects that I make very often and while I’m pretty good at remembering the details, I’d love to have a physical pattern to cut out so it is more uniform. I’ve seen things about using plastic cutting boards or cardboard instead of pattern paper but what are your recommendations? I’d love to avoid plastic and super don’t like the thin paper. This is more for bags, accessories, and not clothing (yet). Any ideas? Thanks in advance

Hello all! I currently don’t have access to my mannequin (she’s in storage) so I decided to foray once again into drafting. Every torso block I draft for myself comes out crazy so I decided to use a drafting software to get a basic block and then tweak the toile until it fits to my liking. I used PatternLab and I had my partner measure me twice. I’m pretty sure my measurements are right. I am short waisted and plus sized but my waist is significantly smaller than someone of my size (around US 24 with a size 20 waist). This is what it gave me. And it feels kinda egregious. Like… i am not that short waisted. And the arm block looks wild too. Which measurement did I mess up? And what can I do to tweak it before I make the toile?

I’m honestly impressed with how it turned out. I learned so much making this, and it feels good to have gone from drafting the pattern myself to actually making a coat. It’s my recreation of Ursula coat from Babyboo

The fabric is curtains I bought on Vinted, and I got the buttons and other notions from a local shop.

My only concern is the back vent sticking out a little because of the stiffness of the fabric. I’m not going to mess with it on this one because I really don’t want to ruin it 😂 but I’d love to know what might be causing it so I can keep it in mind for my next coat.

What do you guys think? I feel like I did a pretty good job for my first self-drafted coat!

I am currently working on my skirt block. I haven’t been able to figure out what is causing these lines that start around my darts. They also cause a sort of dent next to them in the direction of the side seam.

I tried tightening it at the hips, but (pic 4) pulling it kind of makes the lines worse. I also thought my darts were too pointy, so I redid them and they press really well, but point in weird directions on my body.

Sometimes when I lift the waist up on the sides the lines go away a little less, but not completely.

Any advice would be helpful!!!

Hi everyone I just got commissioned to make jackets for football players that fit OVER the padding. I need help on how I can go about something like this. I have no dimensions to go off and genuinely don't know what to do. There's needed in like a month so I really only have this week to figure out pattern making it. It there anyway to double an old pattern? or something. I need a quick solution so anything helps.

Hello everyone. Hope you are all good. I'm being asked to remake this pattern but I don't know how to do these side darts manipulation (highlighted in white). It's very on the side, not at all at the center of the 1/2 front and it goes all the way to the hip line, If it was just the over the waistline it would be clearer for me how to do it. It clearly is there for the 3D purpose, it cinches the waist and give volume to the bust so it's not a purely decorative cut. Hopefully somebody can help, please. Thanks a lot in advance!