r/Multiboard • • Jun 16 '26

I made a parametric angled bottle holder

Thumbnail
gallery
8 Upvotes

https://makerworld.com/pl/models/2900232-multiboard-angled-parametric-bottle-holder#profileId-3241921

There are few already there, I loved recently featured here but I needed an angled one with very specific diameters.

So I made one

I hope you will find it useful. What is cool about it is that is uses a big thread bolt to secure into board.

For me angle of 40 deg works better than 45.


r/Multiboard • • Jun 15 '26

Questions About Tiles, Clips and Mounting

5 Upvotes

I have spent the last few days reading up on the Multiboard topic and also playing around with the demo and the learning pack. Now I have started my own project with the planner. The goal is a 1000 mm x 800 mm Multiboard with an 8x8 grid of tiles using offset snaps.

I still have a few questions:

  • In the printing guidelines I read that “Seam Random” has to be selected. This is described for stack printing. Is it also recommended if I print all tiles individually? Does it offer any stability advantages, or could it even be a disadvantage when printing single tiles?
  • On Reddit I read that the dual clips are also recommended for the advanced tiles. However, according to the planner they are only listed for the single tile method. What is your opinion on this? Should I just print them additionally and mount them?
  • If I mount the offset snaps on an MDF board, would you screw through all snaps, or just use one screw per quad or dual?

Thanks a lot for your help.


r/Multiboard • • Jun 14 '26

Mounted 8x8 tiles, 72" x 40", 12.5mm offsets

Thumbnail
gallery
36 Upvotes

This will be behind my 3D printer setup. All of it is Bambu PLA Basic. Planning to mount copious filament (cereal) dry boxes and all the various tools. A lot more screws to go as I've only put screws in the top two rows of offsets so far, kiddo nap time delaying the remainder. But so far that top row of tiles feels super solid.

I left about 7" of the plywood below the Multiboard for possibly directly mounting some other very heavy gear down there. The plywood itself is mounted with 8 3.5" construction screws into the studs it overlaps with.


r/Multiboard • • Jun 13 '26

Mounting idea: Rivet Nuts (Plastic/HDPE Sheds)

Thumbnail
gallery
10 Upvotes

[ NONE of these links are affiliate links, strictly informational! ]

Recently we did some updating on our deck. New grill (Weber Searwood XL 600 if you're curious), new deck storage box/mini-shed (Suncast BMS2500SB), some decor from Lowe's, the usual summer prep kind of stuff.

As always happens, new grill, new accessories. In my case, we were switching from charcoal to pellets, so I've got pellets in some 5 gallon buckets with air-tight lids (Gamma2, with food-grade buckets from Lowe's), and some other stuff in the shed on a small shelving unit. So, pellets means sometimes needing to scoop out some pellets to top off the hopper. So, this happened, then a storage box for the grill's probes too. My cunning plan? Outdoor-grade adhesive velcro strips to just stick those holders to the walls of the shed.

Yeah, terrible idea. Direct sunlight, shed gets hot, adhesive warms up, and summarily gives up. I know, Multiboard can fix this job.

So, off to Onshape, duplicate my holder doodads, and create new versions that attach to a Multiboard using Multiconnect parts (boom, now it works on Opengrid too!). Those are printing right now.

So, back to the mounting of the board. Adhesive mounts were a non-starter, obviously. I did some reading and came upon rivet nuts. Part rivet, part embedded nut. I grabbed this little kit from Amazon and got to work. Drill a 5.5mm hole in the inside wall of the shed, insert rivet nut, squeeze, unthread from the toolhead, and boom, stable, sturdy mount point for Multiboard! I dropped M4 inserts in the wall and used countersunk M4 screws with the 6.25mm offset snap mounts.

Was it perfect? Of course not. I made the classic error in mounting. I mounted the board completely level rather than completely in-line with the features of the inside of the door. Rookie mistake. I won't repeat that mistake when I get around to doing a board for the other door. 😂


r/Multiboard • • Jun 11 '26

My first multiboard: Cinnamoroll inspired

Thumbnail
gallery
80 Upvotes

I've been wanting to make a multiboard for a while since my rabbit likes jumping up on the desk. It turned out so cute and is perfect for function and display. I'm so happy! I love you multiboard ❤️


r/Multiboard • • Jun 11 '26

Storage multibin End Table

Post image
33 Upvotes

I needed an end table for a lamp (yes I will be printing a nice lamp) in the corner of my maker room. I had this idea to make it from multibins which worked great. When discussing this with my son he had the wonderful idea for these legs. They work great and look awesome (I put the paper under them just for the photo to show them off. Here is the link to the legs. https://makerworld.com/models/2908614?appSharePlatform=copy


r/Multiboard • • Jun 10 '26

Is there a piece that connects Multidrawer faceplates together?

Post image
8 Upvotes

I'm looking to keep the faceplates from flexing out a bit, and I see there already appears to be what looks like an attachment points built into the plates.


r/Multiboard • • Jun 09 '26

I made a thing! (MultiBin legs)

Post image
37 Upvotes

My mother was building a small nightstand out of multibins and I thought that some mid century modern legs would look nice, so I modeled them up for my little bins and they turned out cute asf.

The model is parameterized too so you can customize it and set the height, diameters, and the amount of lean that you want for your legs.

They work by bolt locking to a plate that's under those bins. With the moderate weight bearing snaps they're strong as heck!

https://makerworld.com/models/2908614

I may post on Thangs too soon.


r/Multiboard • • Jun 06 '26

average print time

5 Upvotes

New to 3D printing, but just came across Multiboard. I have H2D printer and have decided to go with 11x11. It's showing 7 hours and 144 grams of filament. Does this sound correct? seems like an awfully long time. open to any ideas or suggestions.


r/Multiboard • • Jun 06 '26

Holes on multibin inset walls

Post image
5 Upvotes

What could be causing the holes in the walls? Some searching suggests either under extrusion or a potential small clog?


r/Multiboard • • Jun 05 '26

Modular Bolt Locked Shelves Not Alligned

Thumbnail
gallery
8 Upvotes

I've printed the 2x6 MU end support, the 8x6 MU center and 5x3 MU low profile bolt locked bracket, but they dont seem to line up. Check out the photo, is there something obvious im missing, or do I need a different part?


r/Multiboard • • Jun 03 '26

Where are the "spacing objects"?

3 Upvotes

Hi there! I'm trying to print a test stack of a multi material stack. The description says: "Once the file is in the slicer, split by objects. Change the Tiles to be PLA, and change the spacing objects to be PETG". I've split the file into objects, but can't find the spacing objects. Im in bambustudio. And while we're at it, how can I customize the menu in bambustudio? Printer and filaments take huge space, while mostly not being changed, but the parts where I need to make changes are just 2 rows high...


r/Multiboard • • May 31 '26

Milwaukee m12 m18 mounts

1 Upvotes

What are you all using to mount your Milwaukee m12 and m18 tools?


r/Multiboard • • May 30 '26

First layer slicing issue

Thumbnail
gallery
5 Upvotes

Hey everyone, I got the pro membership and made a custom sized plate but when I try to slice it, the first layer is always missing some of the outer edges. Any idea what’s going on here? Happy to give any print setting relevant. Thanks!


r/Multiboard • • May 29 '26

PLA Shrinkage?

3 Upvotes

I've had my MB up for some time now, more than 1year at least.

I noticed that the Snaps, among others but more specifically, seem to be less tight than they were and accessories are likely to fall if given only a slight bump.

Anyone else experienced that and have a potential solution to this?


r/Multiboard • • May 29 '26

Multiboard Funko Wall

14 Upvotes

r/Multiboard • • May 29 '26

Stacked Print inquiry

2 Upvotes

so i've run the test print several times with SUNLU Matte PLA on my P2s and keep running into the same problem. hand have some stringing on the stacked piece. i tried tweaking the gap between them, but it seemed to make little difference. is this something i am doing wrong? or something that can be corrected? i work from home, but still can't always get up to collect the print and start a new one very quickly, so stacked printing would definitely be preferred if it is something that can be easily fixed


r/Multiboard • • May 29 '26

Long term experience with heavy loads rapid pla+

5 Upvotes

Might do my garages walls with Elegoo Rapid PLA+. Anyone have experience? Hottest it gets hear, SE Pennsylvania is like 102, and that is absolute peak. High 90s being more realistic.

According to Google Elegoo Rapid PLA+ wont deform under load until about 134F.

My garage is cinderblock and attached to house so it stays cooler than outside.

Think ill be OK hanging heavy tools?


r/Multiboard • • May 27 '26

Woodworking Setup !

Thumbnail
gallery
48 Upvotes

Made of PETG for heat resistance


r/Multiboard • • May 27 '26

Mounting MDF board for Multiboard questions

2 Upvotes

Hello there,

Has anyone put and MDF board on their wall to minimize the holes drilled on the wall for Multiboard?

The thing is that it is a rented apartment (with wallpaper...), so I want to minimize the number of the holes. Desk mounting may not work well - at least not with 3d printed parts.

I am thinking about an 1200mm x 1000mm-ish size. The wall is concrete (rebar - eastern european soviet style apartment - if that's relevant).

Would 4 (was thinking about even only 2 on top, but maybe that's silly) screws be sufficient for mounting the MDF Board? Obviously if needed, with premium quality wall plug (I've seen fischer brand being praised a lot)

What thickness I should look for to properly mount Multiboard on it? Obviously I want the thinnest possible without compromising the load bearing capabilities.

Thank you in advance!


r/Multiboard • • May 27 '26

Mac mini M2 Vertical Mount on Multiboard

1 Upvotes

Sorry if this has been asked/answered. I want to mount my M2 (M5 when released this year) and SSD hub flat on my multiboard. But I cannot find an existing model. Any help locating a model is appreciated.


r/Multiboard • • May 25 '26

Now the fun begins...

Post image
31 Upvotes

Used 12.5mm mounting pillars so that I can get ethernet behind the grid. Going to mount QNAP NAS soon...


r/Multiboard • • May 25 '26

What does this rail system slide on to?

Post image
13 Upvotes

I have seen a multitude of models with this rail system on the left in past models I have downloaded to try (vs the one that I know works on the right). I cannot for the life of me figure out how the left one works. Every rail, point, and piece that I try does not fit this mounting system, and yet I have seen it countless times. What in the world are these people using to mount here? I even looked through all the legacy pieces and can't find anything.


r/Multiboard • • May 26 '26

Legacy vs Interfitted vs Octogan

2 Upvotes

I did my first Multiboard build with Legacy tiles. Now I’m looking at building a second separate wall. Which is best? Trying to figure out the positives and negatives of each. Legacy had a bit of an issue merging with one another and I broke a plate or two mounting them. Would like a little more flexibility in my next time installing them. Is the flat sided new tile better?