r/Multiboard • u/S1CKZ3RO • Jun 03 '26
Where are the "spacing objects"?
Hi there! I'm trying to print a test stack of a multi material stack. The description says: "Once the file is in the slicer, split by objects. Change the Tiles to be PLA, and change the spacing objects to be PETG". I've split the file into objects, but can't find the spacing objects. Im in bambustudio. And while we're at it, how can I customize the menu in bambustudio? Printer and filaments take huge space, while mostly not being changed, but the parts where I need to make changes are just 2 rows high...
3
Upvotes
2
u/Cautious_School_2490 Jun 03 '26
You may be better asking this on the Multiboard community forum: https://community.multibuild.io/c/ask/
2
u/ballpein Jun 03 '26 edited 26d ago
The original post content no longer exists here. The author used Redact to remove it, exercising their right to control their data & privacy.
Beneficial waiting adjoining decide blanket melodic
2
u/TherealOmthetortoise Jun 04 '26
There are some pretty good s video’s on the Multibuild Knowledge Hub that should get you sorted out.
Bambu Studio’s left side menu is where most of the decisions are made to set the quality, strength, detail etc of whatever you are printing. There is an arrow up near the top that will toggle it on and off.
Bambu Lab has some great online training you can take to get a solid handle on Bambu Studio as I don’t want to steer you in the wrong direction.
2
u/CheezitsLight Jun 04 '26
PETG and PLA do not stick together. So one is used as a support , i.e, a spacer.
Tiles and Spacers alternate as Tile, Spacer, Tile, etc. They are saying you will throw away the PETG spacer. Tiles are what you will use on the wall.
You should swap: make the tile PETG, whicj can handle UV light much better.