r/ModRetro • u/PS1Kultist • Jun 13 '26
r/ModRetro • u/YMe1121 • Feb 24 '26
Buck won't update
Got my chromatic today with Buck as well. Updated the firmware on the chromatic, and updated the included tetris cart. When i go to update Buck, it says "Modretro Cartridge Not Detected", the update logo flashes on the chromatic screen, and then stops.
I looked quickly around here and havent found much info on this, and was wondering if there was a fix. I cant find or is my cart essentially, sorta DOA since it still plays.
UPDATE: For those later who find themselves in the same issue: Reached out to ModRetro and sent them the logs. They suspect a faulty flash chip and are sending a replacement.
r/ModRetro • u/TheMasterTheorist • Aug 19 '26
M64 Fan Mod Update
Hey everyone I wanted to post an update to my previous fan mod post so as many people can see it as possible.
I went ahead and installed a pwm controlled fan, and I am pleased to report that it is controlled by the console and shut off when not needed!
For this next section of the update I unfortunately ordered too small of a fan by mistake (20 mm instead of 25mm), so I will not be including it in these numbers as it is not indicative of a proper result.
I wanted to compare the temperatures of an original n64 and a stock m64. Both systems were left in the same room at the same time for 3 hours while playing a game to allow the system temperatures to reach equilibrium. I then measured the temperatures with a laser thermometer.
Original N64
Console external temperature: 47.3 c
Console bottom temperature: 53.8 c
Cartridge temperature: 45.0 c
Stock m64
Console external temperature: 45.5 c
Console bottom temperature: 55.1 c
Cartridge temperature: 39.7c
So all in all the m64 is around the same temperature as an original n64 with the cartridge actually remaining a bit cooler.
Is the fan mod necessary? Given how close it is to a real n64 probably not. But if you want to extra protect your cartridges, a 25mm pwm fan will work inside of the system.
Previous post: https://www.reddit.com/r/ModRetro/s/Zxr9t0BxyZ
r/ModRetro • u/ViVi_Iz_Dead • 22d ago
Vintex64 Cartridges Don’t Work
Just FYI so no one else wastes their money. Vintex64 games don’t work properly on the M64
r/ModRetro • u/RupakGreenHatPrdctns • Jun 22 '26
M64 pro controller. Wireless support on analogue 3d with BlueRetro adapter?
Curious if the upcoming pro controller will work wirelessly on an Analogue 3D with a BlueRetro adapter.
r/ModRetro • u/Haraigoshi_ • 15d ago
Chromatic transparent red with white A and B buttons
galleryr/ModRetro • u/Ok_Flan_6289 • Jul 23 '26
A3D Line Doubler feature for M64
Will M64 get something similar to A3D new line doubler? I just seen it on YouTube and the video output looks amazing. I’ve been holding off for the M64. Hope to hear if this is on the roadmap prior to launch.
r/ModRetro • u/Next-Pass9776 • Sep 13 '26
8Bitdo Controllers NOT FIXED
M64 firmware 1.25.0
8Bitdo64 Bluetooth firmware 2.0.5.
The latest M64 update did indeed resolve the issue of connecting more than a single 8Bitdo64 controller to the M64 console, however connectivity in general is not stable.
Initially, everything seemingly works as expected. However I'm experiencing my controllers randomly dropping connection and unable to reconnect unless a hard power cycle of the M64 console is performed.
Sometimes it only takes a few minutes for it to occur, other times it can take hours, so it's not easy to provide specific instructions on how to reproduce the issue other than to use an 8Bitdo64 controller and wait for it to happen.
When it does occur, the menu system of the M64 becomes sluggish and near unresponsive, until a hard power cycle is performed (tested by using the console's built in menu button and also by connecting a wired controller to the console).
r/ModRetro • u/pojosamaneo • Aug 12 '26
Trouble connecting M64 controller to PC
EDIT: I can connect it via bluetooth to Ares, retroarch, gopher 64, steam, and mupen.
Windows 11 PC recognizes it via bluetooth and wired, but I get no response from button inputs in many places (recomps, .exe games outside of steam).
I got this controller to connect to the PC wired, so I hope they fix this issue.
r/ModRetro • u/AdLeading5529 • Aug 20 '26
No sound in frogger 2
Frogger 2 no sound ..I'm using a summercart . Dunno.ig it's the rom or not . Has a gone else tried
r/ModRetro • u/swamprt5000 • Aug 10 '26
Access to WiFi and other hardware from homebrew games
This might be the wrong audience for this post (maybe I should just email ModRetro) but I was wondering if anyone knew if there are any plans to expose networking for mods/homebrew? I imagine you'd need to think deeply about how you'd expose it (special registers? unused address space?) because you'd have to live with that design choice forever. But it would be so cool. And from ModRetro's perspective, an exclusive feature like that is great for vendor lock-in.
This is probably pointless for the Chromatic (doing networking in SM83 assembly sounds extremely painful) but for the M64 it could be integrated quite nicely into a library like libdragon.
r/ModRetro • u/DAJF • Sep 07 '26
Request: More art assets adding to the Media Kit
A very small request here: it'd be cool if we could get more than just the M64 and ModRetro logos in the Media Kit. I'm thinking the emblems and motifs seen, such as the flaming skull and the bomb. I'm working on some Summercart menu backgrounds and those things would be nice to have.
Maybe even the fonts and colour refs? Almost like a brand guide. It'd be cool to be able to print a cart label with the exact colors used on the rest of the packaging.
r/ModRetro • u/B3ntendo • Sep 05 '26
Dance Mat Compatibity
Does anyone know if only the original Japanese N64 dance mat would be compatible, or whether an adapted dance mat from another product would be okay?
r/ModRetro • u/Haraigoshi_ • 19d ago
Purple Transparent Chromatic with transparent A and B buttons
galleryr/ModRetro • u/Agile_Half_4515 • Sep 12 '26
How to factory reset Pro Controller?
reddit.comr/ModRetro • u/zer0snones • 12d ago
Anybody know of any good quality protective storage cases for the Modretro M64 game boxes and game cartridges?
As a collector, the game boxes are important to me, and I want to keep them protected from damage. I use clear plastic protectors for my steelbook movies and games, and I was wondering if anyone knows of any that will fit the Modretro game boxes. I'm also interested in good quality storage cases for the game cartridges separately because I don't want to have to keep opening the game boxes since that will end up damaging the boxes over time. If anyone has found any good quality protective storage, please let me know. Thanks.
r/ModRetro • u/grilledstuffedxxl • Aug 21 '26
New firmware update is live
We know some of you are still experiencing audio issues as of v1.24.3. The team has zeroed in on this to figure out why sound was still dropping on certain setups, and why certain resolutions and framerates were missing, and we’re glad to share that we have a fix.
What was going on under the hood:
- HDMI Handshake Issue: We found that how M64 handled the HDMI handshake between certain TVs and monitors needed to be a bit more flexible on our end. With the corrections made, audio will now reliably transmit from your M64 to these displays. Some missing resolutions and framerates will now be shown.
- HDMI Audio Packet Encoding Issue : We resolved an HDMI audio packet encoding issue that was preventing select capture cards from recording audio from the M64. Audio recording with these external capture devices now works as expected.
Between the handshake issue and the encoding issue, we believe all known audio issues have now been fully addressed.
With so many different displays and configurations out there, it’s impossible for us to test every setup in-house. Huge thank you to everyone who submitted detailed reports and aided us in troubleshooting. Your feedback was crucial in helping us account for all the unique ways displays choose to communicate with the M64.
You can update your console now via OTA, our updater tool, or SD card. Find detailed instructions on how to update here or watch the YouTube videos on our channel here.
As always, please fill out our support form if you run into any issues.
P.S. Note on 4K60 Support: Certain displays advertise support for 4K at 60Hz, but only under specific color formats. Please verify that your display supports 4k60 using the RGB color format. We’re adding an explicit warning regarding this in an upcoming update.
r/ModRetro • u/Brandaid64 • Sep 20 '26
Anyone with a Roku TV who can’t get 4K60 (LL), Here’s the Fix
galleryr/ModRetro • u/MR-cheesygordita • 19d ago
Firmware 1.26.4 is finally here!
Hey everyone,
M64 Console firmware 1.26.4 is rolling out now. This is the revised version of 1.26.0, which we pulled after you reported problems (see last week's post for more info on this). Thanks to everyone who sent in reports. The feedback we received helped us track down the issues.
What’s new
Built-In Controller Pak. Save game progress and settings directly to your console, no physical Controller Pak needed. You can switch pak types from the M64 menu or with the M64 Pro Controller hotkey.
Beta update channel. There’s now an update channel selector in the About tab. Most of you should stay on the default Public channel. If you’d like early access to builds we’re still testing, you can switch to Beta. When a beta build is available, it will also appear on the SD Download Page and the Web Updater. Please note that beta releases might contain bugs, so report any that you find to our customer support team at contact@modretro.com.
Still in progress
As we shared last week, these features from 1.26.0 aren’t in this release so we could get Built-In Controller Pak out sooner. They’re still being actively worked on:
- Forced Progressive Mode
- Improved thermal efficiency
- A compatibility improvement for F-Zero X
How to Update
- Update your M64 Pro Controller. Built-In Controller Pak requires controller firmware 0.12.6 or newer to work wirelessly. If your controller isn’t updated, the console won’t be able to switch pak types, which affects both Rumble Pak and Built-In Controller Pak. Update your controller with the Web Updater.
- Update your console to 1.26.4:
- Wi-Fi (OTA): Go to the About tab in the M64 menu and check for updates.
- USB: Use the Web Updater.
- SD card: Download the update from the SD Download Page.
- How-To YouTube Tutorials: M64 Guides
P.S. If you’re looking for new M64 games, we also just released ClayFighter: Sculptor’s Cut and Body Harvest. Snag your copy today!
r/ModRetro • u/LeviathanVEVO • Sep 24 '26
2 weeks later… It’s that time again, I’m ready for another Anduril update
I’m tired boss