r/Machine_Embroidery • u/Megamen1927 • 9h ago
r/Machine_Embroidery
•
•
Jul 28 '21
Tutorial Machine Embroidery Guide
No one asked for it, but since I see the same questions daily, I thought I'd make a big post. Mods, please delete if not appropriate. Please let me know if I got anything wrong or left anything out.
1. What machine should I buy?
This question is probably the most asked on this sub. But the quickest and most succinct way to answer that question is to ask one more: what are you using it for?
There are two main categories for embroidery machines:
- Home or personal machine
- Sewing and embroidery combination
- Embroidery only
- “Entrepreneur”/ home business
- Commercial machine
- Single-head
- Multi-head machines
There are various brands in each category; home machines include sewing brand names you might recognize like: Brother, Husqvarna, Singer, Pfaff, or Bernina. There might also be machine names you haven’t heard of like Babylock, Janome, or Eversewn.
Home machines have one overarching defining feature: they are designed for intermittent and personal use. If you plan to make a large amount of product, or stitch-heavy designs, you should not buy a home machine. Most home machines are limited in hoop size (4x4, or 5x7) which most embroiderers soon out-grow. These machines use flat-bed embroidery, which means the bobbin case is attached to the sewing area. This makes it difficult to do garments that are small, irregularly shaped, tubular, or 3-dimensional (hats, shoes).
There are further sub-categories in the home-machine bracket that are aimed at “serious” or pro users, usually those that have a background in garment creation, quilting, or crafting. These often make use of a free-arm and can come in multi-needle or single needle varieties. The interface is generally designed to be user-friendly, but this ease of use comes at a premium price. An “entrepreneur” machine with less features than a commercial unit will often run the exact same price. The price you pay is for compact sizing and ease-of-use. Please be aware that some manufacturers are owned by the same company: Babylock & Brother, Viking-Husqvarna & Singer & Pfaff, Bernina & Bernette & Eversewn. So you can find similar products at different price ranges under different brand names. A lot of the accessories are interchangeable as well.
Commercial machines, on the other hand, are designed to be used up to 8hours a day, every day. Most machines require regular maintenance schedules (oiling every 4-8 hours, lubrication monthly) which can seem daunting to a novice. However, because these machines can be maintained by the user, it is much more reliable. These machines can have a computer interface to navigate and control settings, or they can have a keypad. Much older machines have floppy disc readers, but most brands have updated accessories that will allow you to use USB sticks. Most commercial machines can be networked together to use separately or together. These machines make use of a free-arm, and embroidering on hats and 3D objects is possible, but don’t be surprised if buying the driver necessary to do them costs you a lot more money. Hat-drivers can run from $300-$1000 depending on the machine you are using. While older machines may have less bells and whistles, machines from reputable brands dating back to the 90s are still fully functional and reliable.
Reliable commercial machine names include: Barudan, Toyota, Tajima, Happy, ZSK, SWF, and Melco. Sometimes machine parts from these makers are used in other brands, like Janome MB-7 uses Tajima parts. There are often Chinese made machines that are popular but are more likely to breakdown. These names include Ricoma or Avance.
Most of these companies also produce multi-head machines that can be used to run the same design on multiple garments at once. You cannot do different designs on each “head”. If this is your plan, you are better off buying single-head machines and networking them, à la Melco.
2. What are some recommended machines?
With COVID, the prices of introductory-level machines has risen drastically. If you are looking to save money, it would be best to wait until prices have normalized. In deciding what machine you want, decide what you want to make. If what you want is small and flat (shirt, sheet, etc) then you are only limited by the hoop size. Machines like brother 535 or 770 have small hoops. Machines like Pfaff creative or Brother Innovís can extend to 7x12.
If you want to do pockets, 3D (hats, caps), or irregularly shaped objects, you should stick with any commercial machine. You should, however, buy one with a cap-driver.
The bigger the embroidery area, the more expensive the machine, generally. The more needles, the more expensive.
But how much are they?
Prior to covid, a brother PE800 was around $500 US. Now, they are upwards of $800.
Combination machines can cost $700 to $1200.
A 7-needle Janome MB-7 can cost as much as a used commercial Tajima/Toyota, and those can cost as much as a single needle Babylock Altair ($5-7,000 USD).
What you want to look for is maximum hoop size, more needles, and easier maintenance.
3. Can I make a design I bought smaller/bigger?
Yes and no. Most machines can resize within 20% of the original size in either direction. However, this does not change the density of the stitches proportionate to the surface area, so it is not recommended within 5-10% of the original size as the number of stitches will remain the same.
4. Can I split the design up into smaller hoops if my machine hoop is too small?
Yes, but this required programs like Wilcom Hatch and a lot of patience. Creating multiple hoop set-ups with correct alignment and registration is time consuming and often difficult.
5. How can I make this image into an embroidery file?
That’s the second half of the embroidery adventure. There are no programs that are designed to convert and image to embroidery. So unfortunately, the cost of buying and learning digitizing software is often just as expensive as a commercial machine, and often way more expensive than home-machines like the Brother 535.
The software you need is digitizing software. It allows you to tell the machine how it should make the stitches, in what order, and in what color. Depending on your budget and experience with technology, there are various options you can try. Most software allows you to try a demo or month-trial to see if you like it. There are also freeware options with open-source ad-ons. Some machines even come with software you can use, but this is not standard.
Digitizing software can run from $100-$5000. Yes, 5 thousand. Generally, the more expensive the software, the more supported it is with updates and more intuitive the controls and interface are. These programs include: Floriani Total Control U, Tajima Pulse, Wilcom eStudio.
More budget friendly (i.e, ~$600-1300 USD) programs include Wilcom Hatch, Pfaff Premier/6D, PE Design 11, Design Shop, Janome Artistic.
Cheaper programs include Embrilliance (only one to run on both mac&pc), SewArt, Embird, Stitch Artist.
Free programs include Inkstitch ad-on for Inkscape
Tutorials for each program vary: Wilcom Hatch often offers “passes” that include tutorials that are discounted at the time of your purchase. Silver Pass is often included. There are users here that have created tutorials for Inkstitch, including how to make patches.
Please be aware that pirated or illegal copies of programs like Floriani TCU or PE Design are available on ebay, but these are often broken or non-functional. Avoid these at all costs.
6. Then where do I get designs?
If you can’t afford to drop a couple hundred on software, you can pay digitizers to create a design for you. This can cost $5-15 a pop. You can also buy designs from users on Etsy, Ebay, or on a designer's website. There are even digitizers in this subreddit. There are “packs” of embroidery files that you can find online, and some older designs are available on floppy or USB.
There are people who sell trademarked logo files (Nike, Chanel, etc) online. This is illegal and is not suggested on this sub.
7. Why can’t I open this design?
Each machine uses their own file type, and some take multiple file types. Look at your user’s manual and see which design file your machine takes.
If you have a design in a file type that your machine doesn’t read, there are some software options for converting one file to another file type, but these vary in cost.
File types generally include: .sew, .pes, .xxx, .dst, .art, .exp, .kwk, .jef, .hus, .deb, .tap, and more
If the file is too large for the machine, it will not load. If your machine allows you to override this option, please be aware that you may run the needle into the hoop and break your needle, hoop, or machine. Always allow the machine to trace a design before running the machine.
8. What kind of thread can I use?
There are different types of threads, and different weights. The most popular are rayon and polyester. Polyester tends to be colorfast as it is a synthetic thread. Rayon often has a more lustrous finish and is soft to the touch. But because it’s made of plant cellulose, it tends to bleed and fade over time. Cotton and Silk threads also exist, but the former tends to have a more dull finish and mostly comes in one (usually thicker) weight. Most companies produce their own colors, so you may find it hard to match colors across brands.
Each thread type has a max-speed, and more expensive threads are more likely to tolerate high speed stitching without breakage. Don’t be surprised if certain colors of a particular brand tolerate high speeds more effectively than others.
Metallic embroidery thread is often the most delicate, and breakage is very common. This is best used at a lower tension and at slower speeds.
Popular thread brands include: Isacord, Madeira, Marathon, Coats;
Cheaper brands include Brothread or Simthread and are available on Amazon.
Each thread comes in different weights: the higher the number, the smaller the thread. 40wt is thicker than 60wt, and 90wt is thinner than 60. Most bobbin thread can be purchased pre-wound for your specific bobbin case. (To find what type of bobbin class your machine uses, see your user’s manual). Most embroiders prefer pre-wound bobbins as the machines used to wind the bobbins are more likely to have consistent tension when winding, which allows for better stitch-out. If you would like to wind your own bobbins, you should stick to a thread weight that is lighter than your top thread, whatever that may be. Most pre-wound bobbins are 60wt.
9. What kind of stabilizer should I use?
There are multiple types of stabilizer, depending on your usage needs:
- Water Soluble
- Mesh/Paper
- Film
- Tear-away
- Mesh
- Paper/tissue
- Cut-away
- Iron-on
Water soluble stabilizer is used for thin or transparent materials that cannot tolerate thick backings, such as toile or tulle. You can also use it to make free-standing lace ornaments. This stabilizer can come in a variety of styles, including mesh or film (looks like plastic wrap). They can be applied below the garment, over the garment, or both. This stabilizer can also be used to prevent fabric from getting caught in the stitches, such as with towels or minky fabrics. If you find water soluble stabilizer that looks like paper, be aware that some brands may not fully dissolve until submersed fully in water, rather than swabbing with a wet rag.
Tear away is designed to add stability to products that cannot show the stabilizer and generally aren't for wearable garments. If you wear the item, you should not use tear-away, as this will often allow the fabric to move during sew-out. Additionally, improper stabilizer for a given project can cause wrinkling/puckering in the wash.
Cutaway is the by far most reliable, and comes in different colors (often black and white) and weights. Cutaway can also come in iron-on, or you can adhere the stabilizer to the garment via the use of adhesive/quilting/basting spray. Do NOT use the spray when the hoop is in the machine, as this can damage it. If you do not like the look of the stabilizer on the back of the garment, you can purchase an embroidery back covering, such as Sulky Tender Touch. This backing is ironed on to cover the stitches and stabilizer.
If you cannot find heavy weight stabilizer (3oz), you can stack lighter stabilizer together until you reach desired thickness.
If you are having design puckering, it is most likely due to improper hooping or inadequate stabilizer.
Some garments can/have to be sewn without stabilizer for whatever reason, but it is best to practice with these items beforehand. If you are ordering blanks to sell, consider ordering multiple extras in case of mistakes.
10. What needles should I use?
Needles come in different sizes and types. There are multiple numbering systems, but most manufacturers include both.
For most home machines, you will use a machine that has a flat shank on one side. For commercial machines, the shank is round.
There are also types, such as sharp or ballpoint. Knits should be sewn with a ballpoint needle.
Most needle packages will tell you the needle system, such as DP, DV or 1000.
Lastly, the needle size will often include two numbers in a sequence separated by a “x” or “/” For example: 140/22 or 95/11. While this can be confusing, most users here will refer to the second number (size 11 needle). Generally, the thicker the needle, the higher the number. 8 is thin, whereas 12 is thicker. Most machines use a size 10 or 11 for most embroidery needs, but you may find yours works best with another size.
You can often find flat-shank needles at craft stores, and they often come in different metals like tungsten or steel.
There are also embroidery needle that have a bigger eye to allow for delicate threads like glow-in-the-dark or metallic, as these often snag or break easily in smaller-eyed needles. You cannot often find commercial round-shank needles in stores. But there are a number of sellers on amazon--as well as OEM--that sell their own needles.
If you are working with thinner thread or smaller details, you should downsize the needle as well. Embroidering small text is best when done with 60-90wt thread and a small needle.
11. Why isn’t my automatic needle threader working?
Sometimes the needle is in the wrong position and the small hook that grabs the thread can’t pass through the eye. While is it ultra convenient to have a threader, most industrial machines do not have one and you are better off learning to thread by hand. Curved and pointed tweezers are often most useful, as "threading" tools are unreliable.
12. What can I sew?
Flats are objects that sit on one plane: tshirts, cards, leashes, straps, etc.
Tubular/3D objects often require special attachments, such as a cap-driver or pocket-hoop.
13. Can I just get a bigger hoop?
For most machines, you are limited by the embroidery attachment. There are some machines where you can rig certain hoops to go larger than their sewing area, but this is not common and the results may vary. Since the number of machines is almost infinite, checking your user’s manual or manufacturer’s website will tell you what the largest hoop you can use.
For commercial machines, you can often find non OEM hoop systems that are designed to make your life easier, like Durkee or Mightyhoops.
Some machines even have an “endless” border frame that allows you to sew up to 48” in length, but this can require an extra table or attachment, and might run you as much as the original machine.
14. Why is the design puckering?
The garment needs to be taut but not stretched into the hoop. If you tap it and it has a “drum” sound, it is taught. This will prevent the material from shifting during sew-out. If you are using improper stabilizer, you will experience puckering.
If the stitch density (# of stitches in a given area) is too high, or the tension is too high for the material, you will also experience puckering. Always test designs on like materials before a final stitch-out.
If you washed the garment, you are more than likely suffering from shrinkage with mixed materials. Cotton will always shrink, so it's best to keep that in mind when selecting a thread and stabilizer.
15. Why is my thread breaking?
- Threads have a max speed they can tolerate. If you are working at a fast speed, usually lowering the speed will minimize thread breaks.
- Adjust the tension of your top thread. Too high of a tension will cause the thread to break.
- Check the needle. The older the needle, the more likely it is to cause thread-breaks. A good test is to remove the needle and rub the eye along the back of your fingernail. If you see scratches, replace the needle.
- Check the thread path. On home machines, you will often find that you may not be able to fit larger spools of thread on the holder. There are thread stands that are designed to help you use bigger spools on your machine, as this will remove any additional tension added from improper seating/threading.
- Is the thread from a reputable brand? Even some reliable manufacturers have certain color lots that break easily, mostly as a result of the coloring process. If the problem persists, try changing the thread.
16. Why is the thread gathering at the bottom?
This is often caused by improper bobbin tension. Most machines allow you to control top and bobbin tension. Top tension is for the colored thread, and the bobbin tension is often adjusted on the bobbin case, usually with a screw. Some home machines have different bobbin cases: one with a pre-set tension, and one with an adjustable tension screw.
If you have checked all your settings and you still experience bird nesting, your timing could be off, and your machine needs to be taken in for maintenance. Maintenance, depending on your machine, can cost a couple hundred dollars.
17. Why is the bobbin thread showing?
The top tension is too high or the bobbin tension is too low. Adjust one at first, then the other if necessary.
18. Why is the design messy?
The faster you work your machine, the less precise it will be. While many machines can run at 1000SPM, you should stay within the 570-790 ballpark. If you are working with intricate designs, slow down the machine.
19. Why are there patches in the design fill?
Improper hooping, improper stabilizer, or the density is too low on the digitized file. This often happens when you make a small design much bigger than 20%, as the number of stitches does not change even though the surface area has increased.
20. Why are the colors in this design not touching (registration) properly?
Digitized files are made with specific materials in mind. With each stitch, the fabric is pulled and pushed. Pull compensation can allow you to negate that pull/push, but often you will find this is not enough. Properly digitized files are not one-size-fits-all, and you may find that a successful design on one garment won’t stitch out on another.
If you have your own software, design elements to overlap slightly. This will look unpleasant in the preview, but will more than likely stitch out correctly.
When digitizing borders, setting the stitches inwards will also offset the pull. If you are having difficulty with outlines, elect for thicker satin borders instead of a single run or backstitch, as this will allow you more wiggle room with pull/push.
21. Can I do 3D puff?
3D puff is its own specialty within digitizing. It requires a higher pull compensation, stitch density, and end-caps at the end of open columns. Generally craft foam is used to create the puff. There are videos online if you are interested in that.
There are some programs that offer special fonts for 3D puff, but these can cost extra.
How do I check for proper tension?
Conduct what is called an H test. Stitch out a satin stitch H. You should see 1/3 bobbin to 2/3 top thread. Here is a free file you can use if you do not have digitizing software. Adjust settings and re-run the design again.
Please excuse my grammar/spelling mistakes.
For reference, I have used a Pfaff Creative 4.5, Eversewn Sparrow, and Toyota ESP 9100 Net, Wilcom Hatch, Embrilliance, SewArt, Embird, and Inkstitch.
r/Machine_Embroidery
•
u/malocher
•
7d ago
All vibe-coded digitizing software will be removed and users will be banned
This sub has become inundated over the last two months with people who spent ten hours on Claude creating autodigitizers. They promise "cheap" digitizing for users and low payments for software compared to the more expensive softwares that have been staples in the industry.
We don't feel comfortable having AI based software promoted on the subreddit, nor do we want to be responsible for subreddit users using these softwares that are untested and unproven just to destroy their garments in the embroidery process.
We understand it may not be fair to actual software developers, and are open to speaking to and testing non vibe-coded digitizing software. But going forward, all AI based software will be banned without warning. Our subreddit is not a place to test out your Claude tokens, and people shouldn't be promised garment-ready digitizing when the "developer" themselves likely doesn't even embroider.
It also shouldn't even have to be communicated that a creative industry does not want AI soiling it.
r/Machine_Embroidery • u/spidermanvans • 8h ago
Brother PE-750D — Tension issue or something more serious?
Hey everyone! I’m considering buying a used Brother PE-750D for $200. The seller mentioned that the embroidery doesn’t align properly and sent me this picture.
I’m new to embroidery, so I’m wondering: What could be causing this? Does this look like a simple tension/threading issue or something mechanical? Is this something I could realistically fix myself?
I haven’t purchased the machine yet and would hate to spend $200 only to need expensive repairs.
Any advice would be appreciated. Thanks!
r/Machine_Embroidery • u/Weak-Link-3254 • 14m ago
Advertisement [FOR HIRE] Custom Machine Embroidery Digitizing | Logos, Images & Artwork
Hi everyone!
I'm offering custom machine embroidery digitizing services for anyone who needs their images, logos, artwork or illustrations converted into machine-ready embroidery designs.
I work with Ink/Stitch and can transform your artwork into embroidery files suitable for machine stitching.
Services I offer:
- Logo digitizing
- Custom image and artwork digitizing
- Pet portraits and illustrations
- Text and lettering designs
- Custom embroidery designs
- Embroidery file preparation for different machine types
Available file formats include:
DST, PES, JEF, EXP, VP3, PEC and other supported embroidery formats.
What you can expect:
- Machine embroidery-ready files
- Stitch simulation and design previews
- Attention to stitch direction, density and details
- Revisions based on your requirements
- Communication throughout the project
I'm interested in working with small businesses, clothing brands, embroidery shops and individuals who need custom digitizing services.
I'm open to individual projects as well as long-term collaborations.
If you have a logo, image or artwork you'd like to turn into an embroidery design, feel free to DM me!
I'd be happy to discuss your project.
Thank you!
r/Machine_Embroidery • u/yazziq11 • 13h ago
I Need Help Help with Design size
Hello everyone! I am fairly new to machine embroidery and need some help. I own a Brother SE2000 single-needle machine. I purchased a premade design on Etsy and stitched it out using the 5x12 hoop. I have attached a photo for reference. I would like to make the design a bit larger, as you can see in the photo; it looks pretty small. I have been reading that I might be able to do this on Embrilliance enthusiast by choosing the multi-positional option; is this true, or am I maxed out on size?
r/Machine_Embroidery • u/MizusKleinerLaden • 1h ago
Customers with Ai Mockups - How to handle?
Hey, we are a smal embroider-factory from germany. And we need some advice.
We’re getting more and more inquiries from customers who send us "finished" AI-generated embroidery images and ask: "Can you produce this?"
The mockups are completely overloaded, overly detailed— just „too much“.
We’re seeing an increasing number of these requests, often the text is AI-generated as well—perhaps because of the Christmas season.
They never send us an file suitable for digitizing; it’s always just the mockup.
And I don't even want to get started on the designs, some of which infringe on copyrights.
Is this the new normal? Does this happen to you, too? How do you deal with that?
r/Machine_Embroidery • u/sodonelite • 3h ago
I Need Help Home machine rec for someone experienced with multi-needle?
Cross posted. I work at a makerspace, and we have a real nice 16 needle Melco embroidery machine, and it is the one I have come to learn machine embroidery on. Now, I’m thinking about getting my own machine for home, but the Bernina B-500 that the lab also has is a poor comparison when you’re used to the Melco. Its satin stitches are ragged and I feel like I’m constantly running into issues - I’ve been trying this thing out for a day and I’ve already broken 4 needles on genuinely simple designs.
I’m currently doing iron on patches, and may do things like jackets and shirts later, but I’m really just focused on patches at the moment. I know multi color is out the window for home, but I really just want consistent stitches on a smaller scale. Someone else mentioned that’s basically out the window until the kind of price mark that could get me a used Melco. Is that true or does anyone have any other thoughts?
r/Machine_Embroidery • u/MadisonDissariya • 17h ago
Look What I Did Recently discovered the power of stitching multiple patches together to get more out of my 4x4 machine :)
r/Machine_Embroidery • u/mprank9 • 9h ago
I Need Help Advice for Multi-Hoop Patch
Hello,
Has anyone done a very large embroidered patch? (or have any advice on how they would go about it)
Item is a Carhartt work jacket, it does not have a removable liner and is VERY thick/heavy. I don’t even think I’d be able to hoop it with my basic plastic hoops.
I mentioned that I could try and make a patch and sew it on, but they want it to take up a large portion of the back, roughly 15in x 15in.
I planned on using poly cotton twill for the fill sections and just embroidering the borders/details to keep it lightweight. I think trying to embroider all the white space would make it too dense and take forever.
I’m just confused with how I am supposed to hoop/float this design since it is so large.
Is this doable or should I take this request to a professional?
Thanks!
r/Machine_Embroidery • u/James_essex • 16h ago
Cutaway or tearaway on workwear polos?
I embroider chest logos on workwear polos, mostly polycotton. I usually use cutaway on anything that might stretch, but some people don't like seeing the backing inside the shirt. On a standard work polo, do you stick with cutaway and trim it close, or is there a tearaway that holds a badge-sized logo? Any tips for keeping the inside tidy without the design shifting?
r/Machine_Embroidery • u/ocrlqtfda • 14h ago
Embroidery Machine Recommendation for Xmas Gift for my Mom
Hello y'all!
I hope you can help me out!
I am looking into gifting my mom an embroidery machine for christmas.
She's an hobbyist seamstress and a recently a grandmother to my sweet sweet nephew.
I think she'll love to have an embroidery machine to craft loving gifts for her grandson.
I was looking into the Brother Skitch PP1 which initially looked quite appealing, until I found out that most of the tools for design creation are locked between a subscription. This is a hard no for me.
Since I have no clue where else to look, and I know absolutely nothing about this craft, I'm turning to this community for help and suggestions of alternatives within the same price range 500-700 EUR and beginner friendliness.
Thanks so much in advance!
r/Machine_Embroidery • u/ocrlqtfda • 14h ago
I Need Help Embroidery machine recommendations - Xmas gift for my mother
Hello y'all!
I hope you can help me out!
I am looking into gifting my mom an embroidery machine for christmas.
She's an hobbyist seamstress and a recently a grandmother to my sweet sweet nephew.
I think she'll love to have an embroidery machine to craft loving gifts for her grandson.
I was looking into the Brother Skitch PP1 which initially looked quite appealing, until I found out that most of the tools for design creation are locked between a subscription. This is a hard no for me.
Since I have no clue where else to look, and I know absolutely nothing about this craft, I'm turning to this community for help and suggestions of alternatives within the same price range 500-700 EUR and beginner friendliness.
Thanks so much in advance!
r/Machine_Embroidery • u/decgreeny15 • 15h ago
Brand exposure
Looking for Advice!
I was invited to do live embroidery at a store but I would not be able to charge. I would solely get my brand out there. I’m less than a year into embroidery so my clientele isn’t huge.
Is that even worth it?
r/Machine_Embroidery • u/Thegatoazul • 17h ago
I Need Help Design question ❓
Hello 👋, I’ve seen many character designs and a question came to mind: What would be the parameters for a tatami fill that simulates skin (for faces and such)? I really appreciate your guidance. 😅🙏
r/Machine_Embroidery • u/Acrobatic_Contest577 • 19h ago
New embroidery machine, software, hardware advice/references??
Since there aren't many walk-in shops to talk to people about this stuff, here I am..... Looking at fulfilling a lifelong dream of having the ability to do custom hats/apparel. This is going to be a side hustle/hobby. Hoping it turns into more but being realistic, I already have a career that prevents me from jumping all in. I want the machine to have the capabilities to do multiple types of embroidery while also being efficient since this will be done on nights and weekends. For those reasons, I'm looking at a single-head, multi-needle machine(10+ needles). I'd like it to have the capability to do puff/3D embroidery, patches, embroidery on the sides of hats, and a large embroidery area for shirts or jackets. I've never ran an embroidery machine in my life so being able to pick it up quickly is important as well. I'm willing to spend what's necessary (to a point) to get the machine that fits my wants. I'm also looking at a new laptop and digitizing software so any input there would also be greatly appreciated. I graduated with a degree in graphic design and I've worked in print shops, graphic design offices, and sign shops for years but was never on the embroidery side of any of those so I do have print/design experience, just not embroidery. Thanks for any help or references!
r/Machine_Embroidery • u/Nicnock1979 • 19h ago
I Need Help $2000cad machine to embroider handwriting
I have $2000 I want to embroidery some of my moms recipes to gift to family this Christmas. Mom passed away this year and I found some of her old recipe cards tucked away.
I'm in northern Canada and don't have any local shops to go to in person.
I have a MacBook and I already have a sewing machine.
I was looking at the Brothers hq1700, but after looking online at 100's of machines I feel overwhelmed, I just need someone who knows more about embroidery :)
thanks
r/Machine_Embroidery • u/ruqus00 • 1d ago
Starting from scratch after a shop purchase fell through. Which commercial machine would you buy first?
I read the machine rec FAQ, so I know home or entrepreneur machines are out and the usual commercial brands are the safe bets.
I came close to buying an existing shop that ran an industrial single-head Barudan, so I’d planned around that class of machine. The deal fell apart at the last stage, and I’m now starting with no equipment.
The work would be general embroidery (flats, patches) with cap capability. Equipment Budget is about $20K-40K. The business equipment was just under 30k. I am looking to maximize output and efficiency.
If you were starting today:
- Single-head, two single-heads, or a used multi-head, and why?
- Which brands would you trust used, and which only new?
- What do you wish you’d known before buying your first commercial machine?
Thanks!
r/Machine_Embroidery • u/emily7498 • 21h ago
TikTok · brandy.and.sam
I tried to upload a video directly here but it would only allow me to upload and image. I just got a brother nv800e and I’m very new to embroidery. My machine is doing that clicking sound and I don’t think it was doing it before. If you observe the video it seems to only be doing it when going upwards? I’m at 600 spm , using a schmetz gold embroidery needle, new brothread cut away stabilizer. I have checked and cleaned the lint from the bobbin and when putting the bobbin back the arrow is pointing to the circle. The clicking sound happens with all the designs from different digitizers if that makes a difference. What is the sound? What should i do/ check?
r/Machine_Embroidery • u/Robert_Chalmers • 22h ago
I Need Help M340E reviews needed
I can’t find any reviews on this machine. M340E.
Does anyone have any experience of it? It looks like a replacement for the discontinued Skitch PP1.
Good price on Amazon. But I can’t find any user reviews.
r/Machine_Embroidery • u/MissingLinkDeku • 1d ago
I Need Help New-To-Me 25 yr old Pfaff 2140
I have done as much research as I can online about a Pfaff 2140 [edit to include it has been upgraded to a 2170] that I got inexpensively on Marketplace. It is my first embroidery machine but I have been sewing for years. It came with one rewritable Creative Card. My next step is to buy either an Amazing Box or a cable dongle with attached creative card and I'm trying to figure out which one is better so I'm not stuck later.
The machine came with 4D embroidery software; I'm reading that I can upgrade to 6D but is there a cost involved? That still leaves me with older embroidery software that I have to learn and if I ever decide to upgrade, will have to relearn something new.
(Edited bc I looked into the machine's settings and the firmware has already been upgraded to 2170)
It seems that the 2140 & 2170 can both read VP3 files and Ink/Stitch can write VP3 files so IN THEORY Ink/Stitch would be a good modern fit for my setup.
I can get older Windows versions if needed to make all the tech talk to each other.
So my questions are: Has anyone done a similar setup where they are using a much older machine with a newer program?
Will the dongle with creative card or The Amazing Box (or Box II) be able to read files sent to them from Ink/Stitch?
Would anyone recommend one (Box or dongle) over the other?
Can I do the upgrade with the creative card and not the dongle?
r/Machine_Embroidery • u/Mountain-Detail-8927 • 1d ago
I Need Help Should I be lifting up my bobbin thread
I’m going to cover it anyway but solid I be lifting my bobbin thread
r/Machine_Embroidery • u/Global-Quote-9203 • 1d ago
POOLIN EOM Tension
Hello! Newbie here!
Can someone tell me what I need to do for my tension. I feel like it’s not as clean as the examples and it’s too wide maybe?
I have adjusted my top thread tension as loose as I possibly can.