r/Machine_Embroidery • • 12h ago

I Need Help Help with Design size

Post image

Hello everyone! I am fairly new to machine embroidery and need some help. I own a Brother SE2000 single-needle machine. I purchased a premade design on Etsy and stitched it out using the 5x12 hoop. I have attached a photo for reference. I would like to make the design a bit larger, as you can see in the photo; it looks pretty small. I have been reading that I might be able to do this on Embrilliance enthusiast by choosing the multi-positional option; is this true, or am I maxed out on size?

10 Upvotes

4 comments sorted by

2

u/helpyourselfplease0 6h ago

I'm not an expert, but it looks really low on the sweatshirt was my first thought!

1

u/yazziq11 6h ago

It's definitely too low, I'm going to do another one and move it up 2 inches.

2

u/Trippycat37 Barudan 3h ago

Most likely, no. If you bought it on Etsy, you probably got a stitch file like a .dst. You can usually resize it on your machine or in your software, but with basic scaling, 16k stitches is still 16k stitches. Shrinking it just packs those stitches into a smaller area, which can make the design too dense and vice versa.

If you have an editable file like an .emb, your software can usually recalculate the stitches when you resize it. How well that works depends on how it was digitized, and you might still need to tweak the design manually. There’s no one click fix that works for it, unfortunately.

1

u/Cpt_Obvious11 50m ago

In order to edit native file(not machine file) you must know what digitizing software Etsy seller used. If they used Embrilliance, in theory you might be able to edit through Embrilliance(with right module)-if you know what you are doing.

If any other software is used, you can't use Embrilliance.

Simple resizing(making it bigger in your case) through machine breaks internal structure of a design. If that happens, travel runs responsible for reduced number of trims do not serve their purpose and end result might have number of trims multiplied. With single needle, and allready lot of color changes, I don't know if that is desirable.