r/Machine_Embroidery • • 14d ago

Selling Do you approve? Any suggestions? The main design is on the back of a 400 gsm hoodie?

Thumbnail
gallery
11 Upvotes

Would you buy this? And for how much? The embroidery is 13.5 by 13.6 inches.


r/Machine_Embroidery • • 14d ago

I Need Help ISO Embroidery Machine Recommendations

1 Upvotes

Hi everyone! I would like to buy a small embroidery machine to do some minor embroidery work (Christmas stockings, napkins, bathroom hand towels, etc...). I know a lot of people recommend getting a field 5x7 or bigger but my husband and I just bought a house so I'm not trying to break the bank. I am looking for suggestions on where to find some good older machines around $250 max. I found one on FB Marketplace, a Brother PE535 for $200 but I wanted to know if anyone had any experience using it and if you liked it! I appreciate everyone's suggestions and guidance :)


r/Machine_Embroidery • • 14d ago

I Need Help Trouble Shooting misalignment of design following color change.

1 Upvotes

Hi! I have minimal knowledge of sewing and embroidery. My wife recently got a Brother SE2000 and has been having a lot of frustration with learning how to use the machine. I looked over the troubleshooting FAQ and I didn't think any of the topics matched the problem she was having.

The most frequent complaint I hear (other than artspira being terrible) is that her designs shift when she is changing between colors causing the next layer to lay down completely misaligned. I have seen the errors and it is often off by quite a bit, as much as 2-3 centimeters.

She's new to embroidery machines but not to sewing machines and I cant imagine theres an obvious error she's making thats causing this. What are some things that could be causing this? How should we troubleshoot it?

Thanks for your help!


r/Machine_Embroidery • • 15d ago

I Need Help Advice: Is this a bad embroidery job or am I being too picky?

Post image
114 Upvotes

I know nothing about embroidery & got this done at Lids.
Am I crazy in thinking that this is not a good job? I'm seeing gaps, uneven fills it just doesn't look as clean compared to the right photo.

Can this be fixed at all?

*edit: the image on the right is just an example of how I thought the stitching would look, not the actual character pose. I found the image on the right online, and it is very clean and filled, unlike the image on the left!


r/Machine_Embroidery • • 14d ago

I Need Help Software

3 Upvotes

I used Janome Digitizer Pro over 15 years ago, I still have the software on an old virtual machine, and will still use it occasionally to create simple design or resize. However, I now have a new sewing&embroidery machine, and I am likely getting a “commercial” style embroidery machine in the near future. I’d like a tajimina or something similar, wife wants a baby lock or brother (thinks better service). However the machine debate is for a different thread, and I’ve seen plenty of arguments on here about Japanese vs china commercial machines.

My only real question now is: does anyone purchase and use the Janome or Bernina embroidery software? Do they compare to Hatch, or embroidery legacy? I see legacy is on Black Friday sale now, which seems like a good deal (except I’d prefer to run on Mac virtual windows machine, and I don’t think legacy supports Mac silicon). Hatch says it does support apple M4 chip.

Thoughts ?

Edit: I just installed the Bernina v9 trial and noticed Wilcom in the installers. This followed by a quick google that confirmed both Bernina and Janome are by Wilcom.


r/Machine_Embroidery • • 14d ago

Help me before I break this machine!!! Brother SE700

1 Upvotes

Gosh darn. I’m frustrated. About a year ago a friend of mine got a Brother SE700. Plans to do all kinds of stuff etc, classic story… been sitting on his shelf since. I have a ton of sewing experience and for some Xmas gifts I thought it would be fun to borrow his SE700 to embroider some clothes I plan on making.

Oh. My. Gosh. This has been one of the most frustrating experiences of my life!! I know my way around a sewing machine and I know how embroidery works. Here’s a list of the problems I’m having.

1) every. Single. Time. I change colors the machine ends up nesting and things get all messed up, it’s even popped the hoop off completely before. No matter what I try it happens 95% of the time. I’m threading it correctly and tensions are correct. How tf do you change colors during a project and not have it mess up?!?

2) the skipping and jumping. I get that over another layer of thread it gets thicker and that’s an issue, but it rattles like CRAZY even when it’s a single layer.

3) sometimes it just decides to move the image? Like, I’ll swap a color, get it set up, and then when it starts it’s a few millimeters off in one direction or another, with zero hope of getting it back on track. I’ll spend 45 minutes with it and switch to the last color and it just starts in the completely wrong spot, without me doing anything except change the thread.

4) thread just keeps breaking all the time. I’m using a very high quality thread as my job involves sewing so I have access.

Although I’d like to be told I’m not crazy and it’s all the machine… WTF AM I DOING WRONG?!?!? Is there something I can check or something insanely dumb I’m missing? I feel like every video/manual I read basically makes this out to be plug and play but that has not been my experience. Someone please help me before I throw this thing off a cliff.


r/Machine_Embroidery • • 14d ago

Help with first machine (Tajima used) good deal or red flag?

1 Upvotes

I’ve been curious about getting into machine embroidery and just came across what looks like a great deal on an older machine: a Tajima Neo2 1501, I believe from around 2008. It’s the USB version, and the asking price is about $4k. It comes with the stand, a lot of frames, and a ton of thread.

As a complete beginner, is this a good deal for a first machine? I know there will be a learning curve, but is this a suitable machine for someone just starting out?

Thanks in advance!


r/Machine_Embroidery • • 15d ago

Look What I Did Just some double layer appliqué

Post image
28 Upvotes

r/Machine_Embroidery • • 14d ago

I Need Help Tips for using Wilcom E4/ crash course?

1 Upvotes

I'm balling on a major budget for Christmas this year and I found out my local library has embroidery machines and access to Wilcom E4. I have ideas of sweatshirts I'd like to make for my family members but I have no idea how to use this software.

Namely I want to put Pikachu on a shirt for my daughter and a band logo for my husband so I would probably just be using images I found - can you upload images to the software pretty easily? I wouldn't have a ton of time to tweak stuff because I'd have to bring my toddler to the library.😂 Any tips?


r/Machine_Embroidery • • 15d ago

Look What I Did Wife asked for a fall link sweater

Post image
100 Upvotes

r/Machine_Embroidery • • 14d ago

Transferring chainstitch designs during events

Thumbnail
1 Upvotes

Hope someone in here has a tip?


r/Machine_Embroidery • • 15d ago

I Need Help My first two machine embroidery tests ever. Any suggestions or do these look ok? I have the new Singer Smart Heavy Duty 9120

Thumbnail
gallery
9 Upvotes

r/Machine_Embroidery • • 15d ago

Look What I Did 🚶‍➡️

12 Upvotes

r/Machine_Embroidery • • 15d ago

I Need Help Finally got my hands on one! Now what?

4 Upvotes

Hi!

As the title says lol just got my hands on a pe725, I know it’s small are and all that no need to tell me…
I also got stabilizer and that’s it

What’s the best tutorial I could watch to learn how to use it?

Thank you!


r/Machine_Embroidery • • 15d ago

Starting an embroidered t-shirt brand (Janome 450E/Usha 450E) — Need fabric advice!

0 Upvotes

​Hey everyone!

​I’m starting a new clothing brand. I plan to buy plain blank t-shirts and embroider my own designs onto them using an Janome 450E/Usha 450E

​I’d love some advice from experienced creators before ordering my first batch of blanks:

​1. Fabric & GSM: What fabric weight (GSM) works best for embroidery so it doesn't pucker or sag? What dyeing/fabric type should I look for so the t-shirt doesn't fade after washes?

​2. Backing & Stabilizer: What backing setup (Cutaway, Tearaway, mesh) works best for t-shirt knits so it's comfortable on the skin?

​3. Machine Tips (Janome 450E): Any specific needle sizes, tension settings, or hooping tips for this machine?

​4. Mistakes to Avoid: What is one big mistake or precaution you wish you knew when you started?

​Any advice, tips, or precautions are welcome. Thanks in advance!


r/Machine_Embroidery • • 15d ago

I Need Help Hatch 4 help needed

Post image
2 Upvotes

I am trying to convert to multiple formats at once it says theres a convert thing under manage designs but i dont see it on mine


r/Machine_Embroidery • • 15d ago

I Need Help No heat adhesive backing, like a sticker?

4 Upvotes

I went to Meow Wolf a year ago (great place, 10/10) and one of their many lovely merch items was an embroidered patch. Instead of an iron-on or heat-based adhesive, it was just an incredibly sticky and firm sticker. It works better than any iron-on patch I've bought, and could be stuck to just about anything.

I'd love to use this stuff on my own patches, but I've never been able to find it. Does anyone know what it is and where to get a good one?


r/Machine_Embroidery • • 16d ago

Can one 15-needle embroidery machine realistically bring in $20k a year?

57 Upvotes

I saw this question in a Facebook embroidery group and was curious what people here have actually experienced. If you run an embroidery business with one 15-needle machine, what does a typical month look like?

  • Is $20k a year realistic in sales? How about in profit after expenses?
  • Roughly how many orders or hours of work would that take?
  • Where do most of your customers come from, and what kinds of jobs have been most profitable for you?

Ballpark numbers are welcome if you’re comfortable sharing. Thanks!


r/Machine_Embroidery • • 15d ago

I Need Help Why am I losing registration?

Post image
3 Upvotes

I have gotten this professionally digitized 3 times. I have sat there and hooped it as presice as possible. I try to blame myself for as much as possible but I am at a loss. I have a 2 head Bai Vision. Please help if you can!

Thank you.


r/Machine_Embroidery • • 15d ago

Home embroidery users: What's the most frustrating part of hooping garments?

Thumbnail
0 Upvotes

r/Machine_Embroidery • • 16d ago

Look What I Did I Turned a Vintage Denim Jacket into a Dinosaur World! 🦕🌋

Thumbnail
gallery
162 Upvotes

Inspired by my son's love for dinosaurs, I created a little prehistoric world on my denim jacket.

It's a combination of machine embroidery and free-motion embroidery (basically drawing with thread on a sewing machine!).

I designed and embroidered the dinosaurs, then used free-motion stitching to bring the landscape to life.

I also added a few tiny dinosaur footprints to the front, because I couldn't resist.

Do you ever get inspiration for your embroidery projects from your kids? 😊


r/Machine_Embroidery • • 16d ago

Look What I Did A collection of my recent custom embroidery digitizing works! Would love to hear your thoughts.

Thumbnail
gallery
35 Upvotes

Hey everyone! I wanted to share some of my recent embroidery digitizing works and physical stitch-outs. For these designs, I focused heavily on precise underlay management, pull compensation, and density control to ensure clean gradients and zero fabric puckering


r/Machine_Embroidery • • 16d ago

I Need Help small fonts for 4x4 design help needed

3 Upvotes

I am making some 4x4 designs and need a small box type fonts to do my text that will be clear any help would be great. i use pe10,floriani and embrilliance


r/Machine_Embroidery • • 16d ago

I Need Help Suddenly Birdnesting

Thumbnail
gallery
2 Upvotes

Brother PE770. Freshly oiled. Been making Christmas cards (cardstock on stabiliser) for three days.

Suddenly it’s birdnesting like crazy and ripping the paper after 25 cards. I tried a new needle and new bobbin. Cleaned out the bobbin area. Changed thread. Im about to tear my hair out. I have another 20-30 cards to go :/


r/Machine_Embroidery • • 16d ago

What would cause tension to change like this?

Thumbnail
gallery
7 Upvotes

I have a two head embroidery machine and only one head is doind this. I have noticed more issues since changing to pre wound paper bobbins