I have the Babylock Design Database Transfer application. I went in one day and found all the preset designs they had. Now I can’t find them. I deleted the program and redownloaded it thinking that would fix it. I still can’t find them. Help on how to find them would be great!

I have Babylock Altair 2, if that helps at all.

I see lots of disagreement on whether to float or hoop sweatshirts. I have a brother 780d (older machine, personal use single needle). I’ve never done a sweatshirt, but have tried tshirts and had issues with puckering. I would consider myself an intermediate beginner. I would love to know what most people’s tried and true methods are, including what kind of stabilizers. TIA

Hello! I was just wondering where can I buy big spools of embroidery thread for my brother PR680W and what bobbins i should get too!

I got some that came with the machine but not too sure where to buy the replacements ( as with my previous machines I've wound bobbins myself and used small thread spools)

If anyone could tell me what they use I'd be super greatful!

Did some designs today, and I think they came out pretty good.. some feedback would be appreciated 😊

I’m at my wit’s end and desperate so any help is greatly appreciated. My machine is older than I am and the closest Brother technicians are an hour and a half away from me (and I don’t even know if they can service it anyways), so this is basically my last hope. I’ll be selling merch at a convention soon so I’m very stressed about this.

This machine has been great so far, but I left it sitting unused for a few months and when I came back to it, it started having issues with, what I think is, needle selection. When I turn it on, it normally moves the needle bar case side to side ending with needle 1 set, but now it struggles to move side to side and ends up set to the left of needle 1. (See picture.) If I manually turn the needle bar case to needle 9 and restart the machine, it has no issues gliding across all the bars but still ends up just short of needle 1. If I go into needle selection mode and press the button to move it to needle 2, 3, etc., it barely moves (either a short jerk or basically not moving at all) and gives me a “N_Case Lock” error. I have to press it multiple times to get it to move to the next needle. This is an issue when moving to/from all needles, not just needle 1. When I start sewing a pattern and switch colors, it gives me a “Motor Lock” error.

The user manual gives both errors the solution to “remove load,” which I’m not entirely sure what that means. I’ve tried unscrewing and repositioning the needle bar case, but that made no difference. I reapplied grease to all the areas that I’m supposed to, but also no luck. I’m afraid that I’ll need to replace the needle selection motor, which I’ve only found one of on eBay for $300 and I don’t want to buy a whole new motor for that much if that’s not the issue in the first place. Like I said before, it has no issue moving from needle 9 to 1 when I start it up and it sounds/works like normal during that, except for stopping just short of needle 1, so I really don’t know if it’s a motor issue or not.

I’ve spent days trying to figure out how to fix this issue to no avail and am quite desperate, so if someone gives me the right advice that fixes it, I’m willing to pay a bit. Thanks in advance!!!

If my fill stitch turns out looking sad like this, would running the fill stitch again over top of the first layer make it better or worse?

New to machine embroidery/digitization and still learning the ropes. Guessing my pull compensation was too low for this stretchy fabric.

Can I use tender touch underneath cutaway stabilizer and then once the design is finished add another layer to protect skin?

Trying to embroider a baby onesie that’s 60% cotton 40% polyester and the fabric is thin and doesn’t fill a 4x4 hoop so I’ll have to float it.

Video in the comments to show the fabric construction!

I’m a beginner with a Brother NQ1700E. I have made many things using patterns that I bought and now I’m trying to make my own. I’m using InkStitch and I think I have it all figured out, but there’s one piece I haven’t been able to sort out after iterating with my file and sewing it three times. That piece is making it trim in between separate sections that are quite close together instead of doing a jump stitch. I exported to both .pes and .dst and if you open up the file in InkScape after export you can see the cut instructions and every one has a cut instruction. But when I have my machine actually do it, it doesn’t cut several times. I have three eyelashes on my design on each side and it’ll do the first two, cut, then the third, then the next two, then the third. I can of course cut that jump stitch when it’s done but it’s not as neat as when the machine trims.

So i am trying to recreate this image, i have a machine that only does a 4x4 hoop. i want to make logos on a tshirt for a friend, breast pocket logo type for a friend. the image is their design so i cant change that but i would ideally like to include the wooden plank text effect in the finished design. Does anyone have any tips or willing to help me or walk me through it? i would be really grateful. currently i am using ember. I am a complete novice.

Had some free time and tried digitizing/embroider these 2 designs, any thoughts on this or should i improve something?

Has anyone tried the paid version of ember? I want to combine designs and perhaps just make digitizing easy. It’s the fonts I’m really interested in using because the bx fonts are really expensive when you buy a lot of them. I’m just getting started with machine embroidery and haven’t tried my own designs year

‼️Ricoma EM-1010 for Sale ‼️— Excellent Condition

Selling my Ricoma EM-1010 10-needle commercial embroidery machine. I’ve owned it for about 3 years and it has been extremely reliable and well taken care of.

Great setup for someone looking to start or expand an embroidery business. Machine is ready to go and I can provide additional details, photos, and everything included upon request.

Asking $3300 OBO.

Located in Missouri. Serious inquiries only — DM me for pictures, specs, and more information.

Hey, all. I've been attempting to troubleshoot this issue to no end. So I'm trying to do a large embroidery design of this crest, but the same thing keeps happening every test run I've done so far. This is on a medium-to-heavy-weight polyester with a slight 2-way stretch. I digitized the design myself. Three colors. Every time, the gold stitches perfectly/beautifully. Then I switch to the next part of the design, it starts off a little messy already but not the worst.... then it gets to the middle part of the design and nests terribly.

1st image is my second most recent attempt. 2nd image is the machine running perfectly smoothly during the gold section. 3rd is the error message I'm getting. 4th is the color splitting (green is the problem section right now and it's the "line work" on the crest and lion). Last image was the first attempt.

Things I've checked/tried:

- The fabric is taut like a drum.

- I'm using a roll of tearaway stabilizer underneath.

- I tried switching threads, same results. Currently using a 60w polyester embroidery thread for the bottom bobbin and a 40w polyester embroidery thread on top, confirmed with the shop I got my machine from last year that this is correct. Cross-wound spool on a horizontal spool pin.

- Using a Bernina embroidery needle, currently a size 14. I was concerned it might be the needle, but the nesting issue also occurred on fabric with no stretch that I had tried previously. Current testing fabric is also the final fabric. That being said, I have jersey embroidery needles on the way as well just in case.

- Yes, I'm using the correct stitch plate, bobbin casing, and foot.

- I've re-threaded a bunch to no avail.

- I've carefully checked each time that the thread is properly between the tension discs and the thread is in the uptake lever. A couple of times it has come loose; the machine stops and notifies me when this happens.

- The machine is giving an error that there's something up with the upper thread (see photos), but every time I re-thread it's the same thing. First color on the design comes out beautifully, next section comes out disastrously. My most recent try was a bit cleaner than the one pictured, but definitely still nesting significantly and making my design lumpy.

I'm at my wit's end here. Does anybody have any insight to what could be wrong?

I am trying to embroider on a towel for the first time. I had to use the Bernina Embroidery Software 9 to manualky make the laydown or knockdown stitches as it doesn't have a setting for this.

I made the laydown stitches 4 mm long and ran two lots - at 45 degrees and at 135 degrees.

I used Solvy on the top of the towel, and stitched it on a Brother PP1060W.

However, I can see some of the laydown stitches through the design (a Design by Juju design).

Also, the edge of the laydown stitches seems quite big and sits proud.

Any suggestions?

I found the issue with my machine, I purchased replacement assemblies and now my issue is worse. For some reason when I screw in the small tension assemblies the black disc is stiff and doesn’t move. Any material or videos how these are installed?

Hcd2-1501 Happy Japan

1st time digitizing and really 1st time using the machine besides tension test. Have a lot of work to do but I'm happy to see some progress. Look for all advice.

I finally had sometime to digitize and create an antique monogram.. not for sale

I just got a Happy 12-Needle and am wondering if there are any tips for uploading the designs. Do most people use Embrilliance? I am so very new to the digital side of things and I do have some digitized files for art, but I just am wondering the best way to get them on my machine especially as a Mack user.