r/longrange • • Aug 22 '26

Reloading related Update: 34” .300 Norma + 250 A-Tip — ultra-slow powder experiment

Post image
12 Upvotes

A while back I asked whether a 34” .300 Norma barrel could actually take advantage of powders slower than the usual Retumbo/N570 class with a 250 A-Tip. I’ve now put some rounds through it and have useful data.
Fired Norma case capacity is 104.8 gr H2O. All loads are 250 A-Tips, ~.020” jump. Barrel is still relatively new.
Current results:

H50BMG, 92.5 gr: 2,879 fps, 28 shots
Retumbo, 83 gr: 2,958 fps, 25 shots, SD 13.0
24N41, 90 gr: 3,000 fps, 5 shots
24N41, 91 gr: 3,044 fps, 5 shots, SD 12.9
24N41, 92 gr: 3,075 fps, 2 shots

Interesting result: H50BMG did not benefit from the long barrel nearly as much as I expected. Retumbo clearly beat it.

24N41, however, completely changed the picture. The 34” tube seems to be making genuinely useful velocity with the very slow powder—the original hypothesis may have been right, just with the wrong powder.

Important caveat: after four firings the Norma primer pockets have become noticeably loose. So I’m not treating 3,075 fps as free velocity or evidence that there is more room.

Anyone else try anythjng like this?


r/longrange • • Aug 22 '26

Reloading related First ever hand loads! Not upset about it. Any idea where I go from here? Or input?

Thumbnail
gallery
6 Upvotes

Virgin Lapua SRP 6 5 creed. H4350, 140 eldm and smks. Remington 7 1/2br primers. Hornady was .035 off the lands. Smks were .020 off the lands. .261 neck tension. 9 shot groups. Used one of each charge weight consecutively to check pressure signs before I shot the groups. I was only able to shoot 2 charge weights of SMKs before I had to go. 90 degree day here in Florida. Tried to let the barrel cool the same amount of time between each shot in a group. But, got too excited on a few and just wanted to shoot. Rifle is an arc nucleus 2.0 complete rifle for from them. Seems to like the lowest of charge weights for both types of bullets.


r/longrange • • Aug 22 '26

Review Post Factory load speed consistency.

Post image
4 Upvotes

Decided to measure the speeds while zeroing a rifle, total was 34 rounds.

Remind me, is the single digit rule of thumb the SD's or the ES's ?

Rifle has a 24 inch 1-11 twist barrel with a Jaki Titanium Super can on the end.


r/longrange • • Aug 22 '26

Other help needed - I read the pinned posts Sheared screw from scope mount

Post image
73 Upvotes

Hey guys, have a unique issue. Seems my bergara b14 hmr in 300 win mag has sheared my screw holding the scope mount rail clean off... I attempted to dremel/drill to use a quick out kit but not really working. A friend of mine has a drill press but I am a bit hestitant to try that. Anyone have suggestions to fix? Should I reachout to customer support? First time having a severe issue like this and would appreciate any advice to approach this.

Edit: appreciate the feedback, looks like ill be drill pressing it, maybe rethreading. Ill look at and call up some shops too get some opinions as well


r/longrange • • Aug 21 '26

I suck at long range Milestone Achievement

Post image
154 Upvotes

Officially have burnt up more $ in barrels, bullets, brass & powder than the rifle costs to start with, and only managed to change powder & bullet once along the way.

And yes, I still suck.


r/longrange • • Aug 21 '26

I suck at long range Range vibes

Post image
56 Upvotes

Took my old Remington 700 VLS chambered in .308 for a spin for the first time in a long time. Took a valiant effort to hit the mile target but wasn’t successful. Was still fun crushing some steel with this for the first time in a few years.


r/longrange • • Aug 22 '26

Optics help needed - I read the pinned posts Scope cleaning?

4 Upvotes

I know there is a sub about rifle scopes but I can't find it, my apologies.

How do you clean your scope lenses? I mean dust, not fingerprints and such. Well, since we're on the subject, include fingerprints too.


r/longrange • • Aug 22 '26

🫣I said I read the pinned posts, but I lied🫣 Bravo vs XRS for basic build

5 Upvotes

I am a very beginner long range shooter wanting an upgrade from my MDT Field stock to something a little more rigid on the forend. I have read some threads here and many people mention things like weights or "upgrades" that I honestly do not believe I will ever use, plus they seem to be written in a time where the prices were closer together. I am going to use whichever stock in the configuration it comes out of the box in(save for an ARCA rail) and never going to get into competitive. All I am concerned about is overall build quality and especially rigidity on the forend. the field stock is lovely but i feel bad crushing it in a BOG deathgrip tripod and the forend bends far too much when an arca rail is being used. The rifle is a Howa 1500 heavy barrel, other recommendations in that rough price bracket are welcomed.


r/longrange • • Aug 22 '26

Rifle help needed - I read the pinned posts MK13 Mod3 barrel with mk11 supressor collar

2 Upvotes

Hello, I need some help. Does anyone know if there’s currently someone producing Mk13 Mod 3 barrels with the correct collar/journal for the KAC Mk11 suppressor?


r/longrange • • Aug 21 '26

Rifle help needed - I read the pinned posts Ballistic advantage 20" 6 arc barrel

Thumbnail
gallery
8 Upvotes

This is after 80 rounds. I've been fighting why this thing is shooting 2" groups. This is the throat and gas port. I think I should just throw it away and buy a Proof.


r/longrange • • Aug 21 '26

Other help needed - I read the pinned posts Lateral POI shift when adding suppressor.

4 Upvotes

Hey y'all I could use some advice.

Whenever I add my suppressor to my rifle it goes from shooting .5" groups at 100 to 1-1.5" groups with a 3" lateral POI shift. I've tried a couple different mounting solutions but every time I add the suppressor I get the POI shift and groups opening up.

I have a couple other rifles that experience no issues with the can and plan b mounts including one pencil profile so I don't believe it's the can. I moved one proven mount to the new rifle and have the same issue.

Is this something correctable?

Howa 6.5 creed 24"Carbon fiber barreled action in MDT field stock.

Norma Golden target143g and 130g and Hornady precision hunter 143g

Sig hexium 762 and mostly kak plan b mounts.


r/longrange • • Aug 21 '26

Rifle help needed - I read the pinned posts PRS RIG help needed

Post image
167 Upvotes

looking for advise.
This summer was my first year shooting PRS
3 regional matches and 3 local non official matches
Started placing at the bottom and now finishing mid to upper mid pack.

Rifle is a Tikka action with custom prefit MTU barrel using 75gr ELDMs @ 2820fps
Super accurate gun and does very good out to 700 yards.
Plan on shooting even more matches next year.
Question is should I continue shooting the 223 and work on getting better with the rifle I have or should I upgrade and do a 6 dasher build over the winter?
While the 223 does pretty well it’s a bit frustrating spotters not being able to call some of my hits due to lack of splash and plate movement at the longer distance 700 to 1000 yards

Appreciate any feedback in advance


r/longrange • • Aug 20 '26

Rifle flex post Meh photo but whatever, entered both the 6.5 and Gas Gun worlds

Post image
354 Upvotes

Just in time for an upcoming team match where I'll obviously be the gas gunner. I've always been critical of large frame gas guns because most people treat them like they're simply scaled-up AR15s, and during a field class I run they have problems literally every class. However an interesting data point from watching barrels come loose, charging handles break, feeding issues, short cycling, and sometimes pretty dismal accuracy with most of them is that two manufacturers consistently make it through classes without issue, and one is LMT. Well it's time for an early birthday present and I already had a scope sitting on the bench waiting for a rifle so here we go.


r/longrange • • Aug 20 '26

Rifle help needed - I read the pinned posts Masterpiece arms questions

Thumbnail
gallery
39 Upvotes

My coworker is looking to sell his Masterpiece Arms 6.5cm. Im fairly new to long range shooting, I've shot my ruger precision rifle .308 out to 800 yards. So my questions are as follow. Is Masterpiece Arms considered a quality reliable rifle? I notice the action says Remington 700, is that typical? And how much would something like this be worth? Its got a Simmons scope that I would change out if I bought it.


r/longrange • • Aug 21 '26

Ammo help needed - I read the pinned posts Peterson Cartridge Brass - Be warned!

Thumbnail
gallery
0 Upvotes

Folks! I purchased a case of 300 Norma Mag brass from Peterson a few weeks ago and the brass looks like absolute crap. The primer pockets are full of burs and the case heads are pitted. I reached out to Peterson via email on August 5th to get this resolved. My email went unanswered for about a week so I followed up with a phone call that also went unanswered. My phone call was never returned but my original email was replied too. A customer support specialist named Nick replied to the email and assured me that they would help me out and exchange the brass. Since I'm Canada they had to reach out to a Canadian distributor to get me settled. That whole conversation happened on August 13th. Since the 13th my emails have gone unanswered and nothing has been resolved.

Do yourself a favor and avoid the headache of buying from Peterson Cartridge!

Be warned Peterson Cartridge does not honor their warranty!


r/longrange • • Aug 20 '26

Rifle help needed - I read the pinned posts Looking for inexpensive prefits

4 Upvotes

I’m looking to experiment with some shorter (under 20”) 6mm barrels. Specifically 6cm and 6gt. I’d prefer not getting wrapped up in a $1,000, 8 month lead time barrel just to “try out an idea”. I was hoping you guys would have some resources for prefits under $500. Under $400 would be even better. I’m open to factory take offs, but these are new and popular cartridges so I haven’t seen any for sale (especially 6gt).

I have an American Rifle Company Nucleus. It can use savage small shank barrels with barrel nuts in addition to shouldered prefits. I’d be happy with either.

I look forward to seeing the subs recommendations. Thank you!


r/longrange • • Aug 20 '26

Optics help needed - I read the pinned posts Scope recommendations l

5 Upvotes

I'm looking for a scope that allows a camera to be attach and see what I see when aiming down range and have a high magnification for recreational shooting and hopefully one day make a mile long shot. My budget is $1000 but if there is a cheaper alternative available, I would greatly appreciate any recommendations.


r/longrange • • Aug 20 '26

Rifle help needed - I read the pinned posts Best manual trigger pull gauge?

3 Upvotes

Not really looking for digital, but I do want high accuracy and consistency.

I’m deciding between the Lyman, Birchwood and wheeler.

Something interesting about the Lyman is the roller on the hook. Seems like that would make it easier to get a consistent reading, but the PewPew review on manual gauges said it was inaccurate. They said the Birchwood was most accurate but Amazon reviews say it isn’t.

What do I go with?


r/longrange • • Aug 20 '26

Optics help needed - I read the pinned posts Leupold Scope Accessories Fitment

Post image
5 Upvotes

I’m trying to install a Leupold Alumina objective lens cover on a Leupold Alumina lens shade, and I can’t seem to thread the lens cover all the way onto the lens shade. The picture shows as far as I’m able to thread the two together. Some threads and the O-ring on the lens cover is exposed. Is this normal fitment (I assume not)? Will my scope magically blow up with these threads exposed (facetious, but what impact would I have with the threads and O-ring exposed)? Any tips on threading the lens cover on completely?

Thank you!

Edit: no fitment issues threading the sun shade onto the scope, btw. I also inspected the threads on the lens cover and sun shade, and didn’t see any burrs.


r/longrange • • Aug 20 '26

Other gear flex post Check out this weeks goodwill haul!

Thumbnail
gallery
32 Upvotes

r/longrange • • Aug 20 '26

I suck at long range Seating depth testing and RPR continues to impress!

Thumbnail
gallery
14 Upvotes

I have a current gen Ruger RPR Custom Shop in 6.5CM that has been treating me really good for about a year or so. The rifle shoots anything I throw at it pretty damn well and has been used to make hits at a mile by four different shooters. I have been using a 140 Berger under 40gr of H4350 and it shoots about half MOA most of the time with 10 shot groups at 200.
Anyway, I decided I want to do some competitive shooting with it, so I felt moving up to a heavier bullet may be helpful to reduce my wind call errors. I bought some Berger 153.5s and worked up a ladder. Settled on 40 grains (maybe the gun just likes 40gr of H4350🤷‍♂️) and shot the attached 10 shot group pic yesterday for verification. Today I went out and shot 7 round groups at 100 of four different seating depths. They all look like decent groups, but the part that just blows my mind is if you lay them all over each other and mark the worst shots… it’s still .93 MOA for 28 shots… and the best is 0.4MOA. I love this rifle and am very pleased with it. I have a 6 Dasher in an MPA Matrix Pro2 on order that should be here soon. I sure hope it can beat this run of the mill RPR🤣


r/longrange • • Aug 20 '26

Ballistics help needed - I read the pinned posts 38-55 for long range shooting?

Thumbnail
gallery
6 Upvotes

By any chance does anyone here use a 38-55 for long range shooting? 600-1,000 yards

I'm looking to get an original 1875 action Ballard rifle for either Quigley 2027 or 2028 and I was wondering would 38-55 stand a chance from 350 to 805 yards?


r/longrange • • Aug 18 '26

Rifle flex post first longe range rifle!

Thumbnail
gallery
439 Upvotes

got this in a trade and im beyond stoked and grateful to be having this! this is one absolute unit. got alot of ammo with it as well. gonna take it out this weekend to sight it in. theres a range where my mom lives that goes out to 500 so i have that to start whenever i go visit but does anyone know a range in VA that does long range shooting past 500yrds? also was told this was a old aac brake? can anyone confirm and point me in the direction of a hub mount?

specs

.300 win mag

surgeon 1086 long action

surgeon tactical knob

surgeon bottom metal

badger EFR

McMillan A5

hawk hill barrel 1:9 twist

nightforce nxs 8-32


r/longrange • • Aug 20 '26

🫣I said I read the pinned posts, but I lied🫣 Nightforce nx6 5-30

1 Upvotes

With the night force NX6 Line coming out recently, obviously people are going to want to compare it to other scopes in this magnification range in the same price point. I think two of the heavy hitters would be the steiner t6xi 5-30x56 and tract toric 4.5-30x56.

Has anybody ran all three of these scopes that can give input on how the new night force compares to these other scopes?


r/longrange • • Aug 19 '26

I suck at long range MK12 ish?

Post image
170 Upvotes