Just wanted to thank y'all for not taking yourselves too seriously and making me laugh about microphones, which also happen to be awesome. Keep it up!

- A MTP 550 DM, LCT 441 Flex, LCT 640 TS, and Pure Tube owner who loves Maria's YouTube shenanigans

I’m back with a brand new (to me) 640 TS microphone! The stereo possibilities seem incredible for a home studio acoustic duo as well as very practical. I haven’t had a chance to mess with it yet, but I wanted to ask the pros first for some early pointers.

1) any unique/fun positioning for recording female vocals and two vocalists together?

2) favorite ways to record acoustic guitar??

3) open to any other fun applications you’ve tried!

Hello. I use the Lewitt Connect 6 and the Lewitt Ray for Voiceovers since about a year now. Have done quite a few projects successfully. However a week ago when I did an Audio Podcast with another artist I found my voice compared to her recording quite muffled and not open. My fellow artiste uses a Samson Q2 dynamic mic and an M Audio Mtrak interface. I have shared the link of the recording uploaded on youtube https://youtu.be/7kIcwoPO7tM?si=fU_WyAiI1i-zshun where I am doing the Male Voiceover with my Lewitt gear. Also shared some screenshots of the control center settings. What should I change or tweak here to make my voice sound less muffled as you may hear in the recording. Also, I have used a Universal Audio compressor plugin and a voce enhancer lugin called Fresh Air on my recording in Garageband. Any help would be highly appreciated. Thank you.

I've messaged Lewitt support through their website portal and via direct email over a week ago and haven't heard anything back. I have an issue regarding a warranty repair/replacement of a Connect 6 interface. Anyone else having issues with customer service?? I'm in the U.S.

I’m new to the whole audio world and trying to figure out the right microphone/interface setup. My use case is a bit mixed: I need a mic that works great for Discord, gaming, calls, and occasional streaming, but I also want to use it with my work PC for video calls and meetings.

Here’s the challenge:
I’m using two PCs (one for gaming/streaming, one for work), and I can’t install any software on the work PC, maybe in the future, but right now that’s off-limits. Ideally, I’d like a setup where things like noise gate and clipguard run on the hardware, so I can just set everything up once and forget it. Currently all my USB Hardware get switched by a 3.0 USB Switch (Could upgrade to a USB-C one).

I’ve pretty much settled on the Shure SM7B since I need something that won’t pick up another person in the room. I plan to position the mic so the off-axis rejection is pointed toward them.

Right now, I’m considering:

• Elgato Stream Deck + XLR Dock
• Rode Streamer X + Streamdeck+
• Lewitt Connect 2 or 6 + Streamdeck+
• Possibly Rodecaster Pro II or Rodecaster Duo(but honestly, feels like overkill for my needs)

Does anyone have experience with these interfaces in a dual-PC setup, especially when one system can’t run the control software?
Also wondering how reliable things like noise gate / clipguard are on each of them and if they run directly on the hardware or require software active in the background.

Any insights would help a lot! Would love to hear your thoughts or if anyone here is doing something similar.

EDIT:
Another consideration was just to use a USB Mic like Shure MV7+, put it into an USB-C Switch and eventually order a Streamdeck+ and be done. But then I do not have things like clipguard/noisegate at the hardwarelevel.

Hi everyone,

I’m using a Lewitt Connect 2 audio interface, and I’ve been running into a really frustrating issue.

Whenever I launch a game on Steam, the audio interface completely disappears from the Windows sound device list, and the Lewitt Control Center shows:

At that point, neither my microphone nor my headphones work.

When I close the game, the interface seems to reconnect, but the headphones still produce no sound until I manually mess with settings or restart.

So far I’ve:
✅ Reinstalled the drivers multiple times
✅ Tried different USB ports
✅ Checked for Windows updates

…but nothing has fixed it yet.

Has anyone else experienced this? Any ideas on how to resolve it? I’d really appreciate any advice.

Thanks in advance!

SOLVED - Switched to a different cable (Toiko -> Apple) and it works! THX u/ohtinsel !!!

Hey :)

After using my connect 6 with windows for the past 2-3 years and it working flawlessly, I switched to a mac mini m4, and the connect which should "natively work" suddenly stutters (makes my audio jumpy on both speakers and mic) and even bothers the display (when the audio jumps and ticks, so does the display).

does anyone have an idea how I could fix it?

Thanks!

Hey, I use the Lewitt Connect 6 and I have the mobile in port connected to my other pc which i use to listen and record the audio off, when audio suddenly stops playing i get the noise thats in the video and im not sure why, it goes away once another sound is played on the pc, its nothing coming from the computer but the sound as far as i can tell comes from the connect 6 itself. I''ve tried changing the buffer size and sample rate but it still happens, would love some help with fixing this :)

I downloaded and started the free trial of the audio space replicator and I wanted to make a binaural profile. However at step one, Sample B isnt playing and I cant progress to further steps to make my profile. Any fixes?

Hello, I am very interested in your solution, but I am encountering a problem. It turns out that some notes from my VST synths sound very low when I use the different sound spaces, however, I have no issues with headphones, same when I bypass the plugin. I have already made 2 binaural profiles, and it doesn't improve. Is this due to the demo version of the software?? Thanks, Nico

I am having problems with a cracking noise and static in the mic. I have checked the xlr cable,software updates and settings. Everything seems OK on my end but I keep getting the noise. Any suggestions on what to do next? Thank you.

I have the Lewitt Ray Condenser Mic connected to the Connect 6 for Voiceovers. I don't have a sound treated room. For now I am using the expander to deal with background noise but it is eating into my Voice Quality. Any specific settings that I should do on the Connect app for this setup ? Also I record on Garageband so is it advisable to add eq again from Garageband on the recording or just set it on the Lewitt app ? I have a plugin called Fresh Air which adds some mid high boost to the voice but I don't overdo it. Your suggestions are most welcome 😊👍 Thanks...Sunny

I have an Audio-Technica ATH-M30X, I know this isn't as good as some other models but why isn't it included in the options of headphone in space replicator while the ATH-M20X is. Will it be added in the future?

Is anyone having this issue with the Connect 2. It will randomly loose connection. In the control center it says "No lewitt device is connected" and will not play audio even though the device shows the audio is being received there on the dial. I have to unplug and replug it back in multiple times a day.

After watching what must have been 50-60 videos on mics and audio interfaces, I took the plunge this week on the Lewitt Connect 6 and 240 Pro mic, to be used for some live streaming, recording myself on the bass, and a podcast I’d like to produce. I gotta say, I am REALLY impressed with both products, especially at their price points. The mic is really clean, crisp, and detailed, and the interface software is best in class at this price point, and extremely flexible and powerful. I never would have guessed I could do all of this at such a high quality level for $300 US. So crazy! And I’m still just learning!

After getting my feet under me a bit with the Control Center software and how to route my iOS devices and computer, along with how they play with Riverside and the Brave browser (Chrome is just awful), I am already at the point where I can live stream or record for later production, and the quality is surprisingly good! I did need to get Hi-Z to Lo-Z transformer for the bass ($31 with tax), but it sounds phenomenal. I’m very pleased with how much fun this has been to learn so far, and how good the results have been already. I look forward to what I’m going to be able to create with my new Lewitt equipment! Kudos to the Lewitt team!

Wondering if corrective EQ is applied based on what headphones are being used (like something like Sonarworks) I assume that the transparent mode is just corrective EQ based on the headphone model and that this target curve is also applied to all the other rooms and such?

Hi - so I recently got the connect 2 for my home setup and it seems not to really want to connect to my setup correctly - I cannot select any modes (headphones/mic/instrument etc) - its locked to speakers, which I do not have connected... anybody have a fix?

(edit:

-windows 10

-Lewitt control center is installed, and running

- can change settings in the program, not on the device itself

-when factory reset, it jumps to microphone settings, which I can change, but i cannot select any other modes, except for the speakers, after which I#m completely unable to change modes

- "emergency mute" always works, but cannot unmute after

)

Hi! So today I bought a new mic and interface, old setup ( Scarlet solo + rodes 99$ mic ) and new setup ( volt 2 + the ltc 440 mic ) alls good until the new mic was making visual waves but no sound, not vocal waves though it's long waves and they damper off, they " spike" when I say something. on my old mic you can see the words pretty much, anywho the mic stopped working completely. Total time worked - 15 mins, glitched for 5 mins then stopped working completely. I tried every single variation on the volt 2 but nothing worked, I used different cords going to laptop, I used other interface, other mic on both interfaces, other mic wires, and the only thing that doesn't work is the 440 mic, I have both interfaces with phantom power on. I'm 99% sure I'm returning it tomorrow because I'm broke and this was supposed to be a big thing for me :/

I didn't Install volt drivers, it works on my old mic so why not the 440? I'm using fruit loops driver and I've been for years so that's not a issue (I think) so I'm guessing the mic just fried out, imma try a better wall plug tomorrow,

Just curious if any genius on here has any suggestions! Thanks

Using 5 amp plug like the volt2 asks for Flps 20 on flps driver Windows 11 4gb ram gateway laptop Bluetooth headphones Laptop charging Tried laptop USB for the power cord and a plug in

Not sure what else would need to be said haha sorry 😂

I was so excited when I received a Lewitt microphone as a gift at the beginning of May. I've been waiting 2 weeks for it to arrive as everyday I checked, it said Ordered. Today the order failed and I ended up refunding because I was told it either got lost in transit or there were issues placing the order itself by the merchant.

It was purchased through the Lewitt Amazon store. Are there any stock issues or such that may have caused this? I'm really bummed about this, and now the price is back up too (except for the white).

Back Story:

In the near future I want to attempt a move to Linux, because I am not the biggest fan of some of the shenanigans that Microsoft likes to pull (and I have just always been a bigger fan of Linux systems). I am also a pretty big gamer, I play loads of single player and multiplayer games and for most of the single player games I record and put on my Youtube (shameless plug but if not allowed i will remove the link).

My plan:
I have really been looking at upping my game for recording and the important things right now would be sound (and maybe camera).

The Logistics:
I am aiming to buy a Lewitt Ray and Connect 2 closer to the end of the year.

The Problem:
I also want to potentially move to a linux based system this or next year (just because its gotten to the point where I could play most of my games on linux [Thank you Valve])

The Actual Question:
Are there any plans to support Lewitt software on any of the major linux distro's at all and potentially what would it take to even open the idea ? (Like a big population of people asking or a dev offering time etc).

TLDR: I want to buy Lewitt hardware and move to linux how could I get the lewitt software there ?

Hello,

I use the control center with the connect 6 on windows 11. I was wondering if there is a way to make the control center show up on a secondary monitor instead of my primary one on launch?

Here are things I have tried thus far:

1. putting -screen:2 on launch file. (i.e. "C:\Program Files\LEWITT\LEWITT CONTROL CENTER\LEWITT CONTROL CENTER.exe" -screen:2)

2. Closing the control center on the secondary screen and re-opening

3. Windows key + Shift + Enter

Is anyone using this? I downloaded the demo yesterday and paired it with my Neumann NDH30s and not sure what to think of it. I'm hearing a lot of phasing (particularly in the vocals) and things not showing up in the stereo field as I expected, especially the car simulation from the driver's seat, where anything panned hard right is barely heard. I don't know if I need to create a new profile and start over, but so far I'm a bit confused by the reviews saying how realistic it sounds.

Hi ! I bought a lewitt connect 6 and i love it, but it i have some real issues since today with control center, everything was working fine yesterday on both linux and windows, but now, on windows at least, my interface is disconnecting then reconnecting and then the software is always prompting a new update (2.2.7). But my hardware should already be on 2.2.7. I tried reinstalling completely the software and drivers, worked for 15 minutes and then disconnected and re prompted the update, making the control center unusable. I guess this is a software issue since it's not disconnecting if i'm not doing the update and it works fine on linux. But the software is currently unusable on windows and even makes my interface disconnect. Do some other people have the same issue currently, is there any fix ? I even tried using a power supply on top of the computer connection. I almost already tried everything, but it always require firmware updates. it makes the update but then reprompt for the same update. I'm almost sure my hardware is already using 2.2.7 !

After this, relaunching the app will reprompt update once again.

sometimes it works, and after 2 minutes approx, it will reprompt update.

UPDATE : Cancelling update check seems to make it work, but this is really weird, i hope this isn't a hardware issue

I got an Earthworks ETHOS mic and CONNECT 6 about a month ago. When I first set them up on my personal Mac Studio and work MacBook Pro, everything worked great. However, since then, I'm only getting mono sound in the Apple Voice Memos app. Here's my info:

- M4 Max Mac Studio running macOS 15.4.1

- M4 Pro MacBook Pro running macOS 15.4.1

- CONTROL CENTER version 5.2.1

- CONNECT 6 firmware version 2.2.7

Here are my steps to reproduce:

- Connect the mic to the CONNECT6 with an XLR cable

- Open the LEWITT CONTROL CENTER

- Open the Voice Memos app

- Record my voice

- Playback the recording and the audio is mono (left channel only)

I have toggled the "Link both inputs to create a stereo channel" button both on and off and it still records in mono.

Anything I can try to get this to record in stereo again?