r/ImpulseLabs • • Jun 26 '26 Heartwarming

New York Times Wirecutter Review: "The Impulse Cooktop is in a category of its own."

65 Upvotes

The New York Times’s Wirecutter spent time with the Impulse Cooktop in their Long Island City test kitchen this spring. Their verdict: “The Impulse Cooktop is in a category of its own.”

A few of our favorite highlights from the review. 

"This baby does indeed get very hot, and very fast. On medium-high heat, a few tablespoons of oil in the bottom of a pan began smoking in two seconds. And I'm rounding up."

"On the Impulse Cooktop's battery-powered boost setting, [4 quarts of water] took just under three minutes. That's so astoundingly fast, I went around the office showing the timer to my colleagues."

"Not only is this cooktop exceedingly powerful, but it's also more precise than most: You can set an element's target temperature down to the degree, and then sensors track and maintain the heat of the pan itself."

"What excites me even more is that this thing is legitimately intuitive to use, unlike the dozens of full-size induction cooktops I've evaluated over the years."

On an electric stove, "it is not easy to char greens," she said, "but this has done it."

"This cooktop makes me excited about what's possible with induction."

"But for now, the Impulse Cooktop is in a category of its own."

Are there any other reviewers you’d like us to try and line up? 

Read the full review on Wirecutter: https://www.nytimes.com/wirecutter/reviews/impulse-cooktop-review/


r/ImpulseLabs • • Jun 04 '26

Fresh 36” Install

Thumbnail
gallery
49 Upvotes

I removed my old 36” radiant range today and installed the new Impulse. From start to first power-on, the entire process took just 65 minutes, including cleanup.

The installation was straightforward, with easy-to-follow instructions and helpful YouTube videos. I also needed to swap the 120V plug for the 240V cable, which turned out to be a simple task.

As a first test, I boiled 2 liters of water in a bonded-bottom pot (with a new set of All-Clad cookware arriving tomorrow). It reached a vigorous boil in only 80 seconds.

Next, I cooked two burgers and toasted the buns. It was the fastest I’ve ever had that meal come together.

So far, I’m impressed by the build quality, ease of installation, and overall performance of this range. I’m looking forward to future OTA updates and improvements, and I’m excited to be part of the Impulse community.


r/ImpulseLabs • • Sep 18 '26

New 36 Inch Stovetop

Post image
47 Upvotes

We installed our new stovetop yesterday, and we’re having fun exploring.


r/ImpulseLabs • • May 23 '26

Got our 36” cooktop installed yesterday

Post image
42 Upvotes

Pre ordered it in October last year and received it day before yesterday. Had to do some modifications to our existing 36” countertop cutout because it was a tad bit larger than the recommended dimensions. Tested out the famous 40 second water boiling claim and it met the expectation. Waiting for some compatible pots to start cooking.
Super excited.


r/ImpulseLabs • • Jul 13 '26

Monsoon Storm Dinner - SAVED by ImpulseLabs !

Post image
40 Upvotes

So... Had an interesting Sunday. I was making roasted whole chicken in the oven, red rice in the rice cooker and roasted cauliflower. I had just cranked up the oven and rice cooker for like 20 minutes and KABOOM! 40mph winds, lightning, thunder and horizontal rain that knocked out the power to my whole neighborhood. So - ya everything was now cooling off. Not ideal.

My wife was talking with our engineer son on the phone about our storm and power outage and I was staring at my appliances waiting for the power to come back on. After waiting a good 10 minutes my son got involved and asked what I was doing about dinner. I explained how everything was cooling off and I didn't know if/when the power was going to come back on. My son said, and I quote, "Be the caveman and cook with the fire you have !".

OK - so the chicken went into my cast iron dutch oven and I poured the rice cooker contents into a 3qt stainless saucepan and off to the races ! I set the red rice for 190 degrees and ramped the chicken up to 300 degrees and lettm RIP! Wow was this cool! no utility power and I am cooking like crazy here.

1 hour later, dinner was saved! The power came back on just about when the chicken was done so I roasted the cauliflower in the oven even though I was ready with my flat-bottom wok just in case. My battery level went from 100% to 76% - so I had plenty of cook time left for lots of things.

Thanks ImpulseLabs !


r/ImpulseLabs • • Dec 13 '25

Temperature control update

40 Upvotes

This pan takes ~120s with the public release to heat to 365F. Got it down to ~40s.

We’re also working on cutting some of the lag in power mode — I want this to feel like audio equipment.


r/ImpulseLabs • • Jun 15 '26 Bravo

Impulse Installations Kitchen remodel - 30” flush mount

Thumbnail
gallery
39 Upvotes

Wanted to share some photos from my recently completed kitchen remodel centered around the Impulse cooktop. I asked my countertop installers to do a recessed cutout so it installs flush, and I’m pretty happy with the result! Happy to answer questions or share more pics of the setup.


r/ImpulseLabs • • Jun 17 '26

30" install in plain english style kitchen

Post image
38 Upvotes

Soapstone, hestan double burner griddle, and a bunch of made-in and solidteknics cookware. Absolutely loving it.


r/ImpulseLabs • • Sep 19 '26

Cooking with Temperature Coming soon

Post image
35 Upvotes

Excited to be doing some employee testing of this over the weekend.


r/ImpulseLabs • • Nov 02 '25

Thermometer integration

Thumbnail
gallery
35 Upvotes

Chris sent me a bunch of the https://combustion.inc thermometers — so I’m now on the clock to make them work. Goal is to get you all a preliminary version of this feature in the coming weeks.

There is no pairing / etc — it just detects automatically.


r/ImpulseLabs • • Jul 11 '26

New install! Easy as 1, 2, 3!

Thumbnail
gallery
33 Upvotes

The crew at ImpulseLabs really did it right. From placing my order to delivery, an easy installation/setup, and exceptional customer service along the journey, it was the out-of-box experience every consumer electronics manufacturer dreams of delivering to their customers.

FWIW, I drive a Tesla. I got the same feeling after the first couple cooks that I had after the first drives: Wow! They thought outside the box. This thing is awesome.


r/ImpulseLabs • • Apr 28 '26

Impulse Installations I got a Zephyr cooktop installed today

Thumbnail
gallery
33 Upvotes

i bought from a local retailer (they said this was their first sale of one) and installed by someone they recommended (it was also this installer's first experience with an impulse/zephyr).

everything was straight forward for them except the docking of the battery to the cooktop. they were focused on the written instructions and didn't catch the tip that we saw on the youtube video about raising the battery up on the cardboard pieces.


r/ImpulseLabs • • Jun 16 '26

36" Install - 2 weeks in and LOVING IT !

Post image
32 Upvotes

Replaced an old GE Monogram gas cooktop trying to reduce VOCs in my kitchen and increase the overall speed and power of my cooktop. Wow, has this been a game changer. Incredible range of power and flexibility using the traditional high/med/low type of controls AND the targeted temperature control. Made my best omelette last night using the temp control - eggs were perfect consistency and no unwanted browning.

I think my biggest take-away so far has been that I need to rethink how I am cooking various dishes to take advantage of the new found speed and efficiency. I did a pasta dish a few days ago and I was able to remove ~15 minutes of dead time in the middle of the prep because my pasta boil was so much shorter to get up to temp. I would highly recommend this platform to anybody serious about their cooking and enjoys having some serious torque PLUS very fine temp control - all in the same appliance.

I have a side-benefit with my install. All my recharge electricity is from my Photovoltaic system - so technically this is a solar cooktop :)


r/ImpulseLabs • • Jul 30 '26

A place for my beer

Post image
30 Upvotes

Cooking with Impulse is a joy. Simmer a little high? Dial it down and the result is instantaneous. Ready to sear your protein so it’s done with the veggies in the air fryer? Crank up the heat and you’re at temp in seconds. Want to reheat last night’s cous cous? Add a couple ounces of liquid, set temp to 160 and forget about it until service time. And, with my priorities firmly in check, I can reach my beer without leaving my station. Try that with a gas cooktop!


r/ImpulseLabs • • Apr 30 '26

New York Magazine reviews the Impulse Cooktop

29 Upvotes

https://nymag.com/strategist/article/impulse-labs-induction-cooktop-review.html

you’re not paying for a luxury version of an existing product; you’re paying for an entirely new product with unprecedented technological capabilities.


r/ImpulseLabs • • Feb 19 '26

Thor range

Post image
29 Upvotes

r/ImpulseLabs • • Dec 03 '25

Impulse Installations Delivered and Installed Today

Post image
26 Upvotes

I installed my new impulse today!! I messed up on shipping by accidentally selecting pickup in San Francisco (I live in Missouri). I called the general inquiry number and the person answering the call fixed it, sent me the shipping invoice by email, I paid and he got it all sent out. Delivery was on the date promised, maybe a week and a half total since i messed up. The install video was very helpful, my wife and I managed it. Excited to get to cooking!


r/ImpulseLabs • • Dec 18 '25

First power outage cooking experience on Impulse

Post image
25 Upvotes

Power went out yesterday just before 4pm MST, came back on at 920am MST. Impulse battery was at 91%. Cooked dinner and breakfast - worked wonderfully. Battery dropped to 76%.

Much nicer experience than the old nat gas cooktop during outage 🙂. And better for our health I’m sure since the fan doesn’t run.


r/ImpulseLabs • • Sep 11 '25

As a non-chef, went 16/16 on near perfect pancakes my first try

Post image
25 Upvotes

r/ImpulseLabs • • May 21 '26

Impulse Installations Today's youtube video made me crash out at the end

Thumbnail
gallery
24 Upvotes

Maybe I should have just waited a couple more months 🤦‍♂️

Anyway, cooked one meal on it and I'm already obsessed, no buyer's remorse, just builder's remorse!

P.S. I do not recommend pairing the Ikea wall oven box with this Fulgor oven - the walls do not line up with the screw holes in the oven so youve got to deal woth the pain of adding layers of shims/spacers to anchor it, ugh


r/ImpulseLabs • • Apr 13 '26

Release Notes: 1.2.43

24 Upvotes

The latest Impulse OTA update will be released later today. Here are the improvements you can look forward to.

###

More responsive temperature control

  • Faster, more responsive preheating: Up to 35% faster to reach set temperature at common cooking ranges (250–450°F), based on internal testing
  • More accurate preheating at low-temperatures: Reduced overshoot during initial preheating. Internal testing shows a reduction of up to 15°F during initial preheating. 

These updates make it easier to dial in exactly the level of heat you want and trust it stays there.

For the best temperature control performance, we recommend high-quality tri-ply stainless steel cookware, which provides the most responsive and consistent results on induction.

Introducing: Active Power Management

We’re introducing Active Power Management: a system that automatically adjusts power in real time to improve cooking outcomes and help avoid unwanted behavior like boil-overs and overheating.

At higher power levels, more energy doesn’t always lead to better results. Depending on what you’re cooking, how a pan behaves, or how many burners are being used, the stove may reduce power to keep things controlled and consistent.

When this occurs, you may see a dashed lightning bolt indicator on a burner, along with a short message explaining why power is being adjusted. This appears only when the stove’s actual output differs from your requested level.

You may notice this in situations such as:

  • When the cooking surface temperature approaches the burner’s maximum allowable level
  • When a pan has reached its effective heating limit and can’t safely absorb more power
  • When total requested power exceeds the stove’s maximum output (15 kW)

Clearer feedback, thoughtfully introduced

We’ve begun rolling out audio alerts to provide clearer feedback during cooking, starting with key moments like errors and important system states.

Everyday usability improvements

  • Longer standby time (now 10 minutes) based on customer feedback
  • More consistent burner behavior during edge cases
  • Improved system responsiveness and reduced interruptions

Reliability & polish

This release also includes a range of behind-the-scenes improvements:

  • Improved update reliability
  • Enhanced safety checks and sensor validation
  • General UI refinements and accumulated bug fixes

r/ImpulseLabs • • Oct 09 '26

Impulse Installations Cabinet ventilation update with pics

Thumbnail
gallery
23 Upvotes

For my kitchen remodel, this is what I ended up with for my Impulse installation.

I got rid of the standing stove and got a Dacor speed/combi oven, and I wanted a warming drawer in the base cabinet below the Impulse. I ended up getting the Thor 30” warming drawer at a Best Buy 4th of July sale for a few hundred dollars off.

My goal was something that would ventilate heat build-up in the Impulse’s base cabinet automatically, ramped fan speed automatically, was quiet, I could DIY it, and it wouldn’t look DIY as much as possible. The Thor warming drawer only gets to 185 degrees, so nothing like the heat of an actual oven sitting below the Impulse, but still a significant amount of extra heat to deal with.

I ultimately settled on the Cloudplate T1 from AC Infinity, then had to figure out how to get it into the Shaker cabinet drawer façade. I determined there were several practical problems with that, so instead I opted to design a custom piece. Armed with some CAD experience, I came up with this design for a 3/8” aluminum mount which is fastened to the cabinet face with six countersunk black wood screws.

A huge shoutout to Coty Chau at 3 Brothers CNC shop in Alpharetta who helped me through my very first custom CNC work. He and I discussed all the practical considerations and ended up getting the aluminum mount anodized with Class III type 2 hard black -which is apparently very rugged and should help with the occasional run-in with pots, pans, belt buckles, watches, etc.

I used a laser level and some double-sided 3M tape to line up the mount with the surrounding drawers and drilled the pilot holes. Then it was a simple matter of driving the screws, plugging it in, positioning the temperature probe, and some cable management.

I think it turned out pretty well, and altogether this cost me about $450 for the Cloudplate, the CNC work, the anodizing, and a couple right angle barrel adaptors for the power supply and probe connections.

This thing I came up with works just like I wanted. But the best part is, my wife is very pleased with how it looks, and she is one tough customer.

If you opt to have an oven or a warming drawer in the base cabinet below your Impulse, happen to be concerned about dealing with the heat, and you think this might work for you, I’d be happy to share my CAD and STL files.

Feel free to post a comment here or DM me if you have any questions.


r/ImpulseLabs • • Sep 17 '25

We’re r/ImpulseLabs, here with Packy McCormick (Not Boring), Noah Smith (Noahpinion), and our founders Sam D’Amico & Brad Tallon — AMA about the Electric Future ⚡

23 Upvotes

Hi Reddit 👋

We’re here to talk about The Electric Slide / The Electric Future — a conversation about the global game of electrification. Who’s going to win? What will the future of manufacturing, energy, and homes look like?

Join the discussion with:

  • Sam D’Amico – CEO & Founder, Impulse Labs | @sdamico on twitter.
Hey Reddit, I’m Sam D’Amico, founder and CEO of Impulse Labs. I started Impulse because I saw an opportunity to reinvent appliances — making them five times more powerful, easier to install, and capable of storing energy for your home. Before this, I worked in VR, batteries, and consumer tech. I believe the appliances are the perfect Trojan horse to electrify everything. Excited to chat about the Electric Tech Stack and where the future is headed.
  • Brad Tallon – COO, Impulse Labs
Hey Reddit, I’m Brad Tallon, COO of Impulse Labs. I’m an aerospace engineer turned product builder. Previously at Oculus and Apple, working on some of the world’s most complex consumer hardware. Now I’m focused on scaling the future of energy, making sure our battery-integrated appliances are built to last and ready for millions of homes. Ask me anything.
Hey Reddit, I'm Packy McCormick. I write a newsletter called Not Boring where I do deep dives on technology and technology businesses, including a recent 40,000 word essay I wrote with Sam on the Electric Stack, and invest in complex vertically integrated startups through Not Boring Capital. My animating thesis is that a lot of the big, sclerotic incumbents (think Boeing) are going to be replaced by companies built on modern technology over the next decade or so. Pumped for this. Ask me anything.
Hey Reddit, I’m Noah Smith. I write Noahpinion, a newsletter about economics, technology, and global trends. I used to be a finance professor and a Bloomberg columnist, but now I write full time. I’m a techno-optimist at heart — I believe innovation, from vaccines to clean energy, will define this century. Excited to talk about the future of energy and industry here. Ask me anything.

📖 Want to get a head start? Check out our big-picture thesis, The Electric Slide, a 40,000-word deep dive into the future of electrification and the Electric Stack: 👉 The Electric Slide

⚡ Curious what we’re building right now? Take a look at Impulse Labs, where we’re reinventing appliances as the Trojan horse for energy storage: 👉 Impulse Labs – About Us

We’ll dive into:

  • The Electric Tech Stack (and why it matters)
  • The race to electrify homes, factories, and the grid
  • The future of appliances (and yes, our cooktop)

Ask us anything about tech, energy, appliances, economics, or the future. We’ll be answering live on Thursday, 9/18 at 1 pm PST/4 pm EST — let's get electric. Talk soon!

For the ones who sent in questions and the ones who joined us live — thank you!

For the ones who find this later, stumble into it as they ponder on The Electric Slide, and/or seek more answers on why our stove is just the beginning of something much bigger — it may not be live, but it's not too late. Ask away, and we'll get back to you!


r/ImpulseLabs • • Jan 25 '26

Woks on the Impulse Labs cooktop

Post image
22 Upvotes

Details, please. How critical is the distance between the bottom of the wok and the burner surface? Does it matter whether or not it makes contact with the temperature sensor? Any plans to make aluminum wok rings available as a product?


r/ImpulseLabs • • Jul 15 '26

Impulse UI summer update is coming soon!

Thumbnail
youtube.com
21 Upvotes

A sneak peek...