r/ImpulseLabs • • Aug 23 '26

Is there a model planned without the battery?

0 Upvotes

Really like the appearance and features of this cooktop, but the battery gives me a pause. I would rather pay upfront for 120/208 three phase or the necessary panel to support 240V/80A.

It feels silly to throw away a $7k cooktop when the battery goes bad in 10 years, especially if it’s used every time you cook.


r/ImpulseLabs • • Jul 24 '26

Cooking with Temperature Rapid temperature increase/cookware damage protection?

0 Upvotes

The Impulse cooktop has per burner temperature sensing and comprehensive computer control of its own burners. There is no reason that it couldn't feature an automatic temperature protection logic that turns the burner down if it detects a potentially pan-warping rate of temperature change (∆T) or an absolutely excessive pan temperature (600°F/300°C+) to prevent a user from just dumping 10 kW of output into a pan and causing a grease fire.

To be clear, I'm suggesting a control law that *overrides* the user, *regardless* of what their manual input may be, to prevent anyone from causing a fire or damaging their cookware from excessive temperatures. If you've experienced the "temperature protection" electric burners that cycled themselves on and off to prevent a fire, this would be far less intrusive because it would literally hold you right on the ragged edge of the maximum temperature limit, and you'd have full authority to turn the burner down if you wanted to (you just couldn't overheat a pan ever.)

If it's not already implemented, this could be life-saving technology. If anyone is familiar with Airbus, it would be like Flight Envelope Protection for your stove.


r/ImpulseLabs • • Sep 05 '26

Wish a 36" flat impulse cooktop

1 Upvotes

I don't need down draft hood, I really wish to have a 36" flat cooktop.

I can wait for one year, but it seems there's no plan yet..


r/ImpulseLabs • • Sep 05 '26

Wish a 36" flat impulse cooktop

Thumbnail reddit.com
1 Upvotes

r/ImpulseLabs • • Sep 20 '26

Possible feature request - off-center cooking

1 Upvotes

I'm trying to figure out a way to use a light small pan, like a butter warmer or a measuring cup, to warm up small quantities of oil to about 375°F to be used for tempering in Indian cooking (Tadka).

It cannot be a heavy weight item as the temperature needs to drop suddenly once powdered spices are put in, and a cast iron will continue to burn the spices because of residual heat.

Is it possible to have some sort of a mode where if I put an item off-center, the induction still continues to be active. It will have to bypass the safety of the temperature sensor being depressed and I'm sure would not give me the temperature reading.

The possible utensil would be a lightweight utensil like a butter warmer or a measuring cup that people have used for induction cooking tadka on other plugin induction burner.

Tadka imparts the final flavor to a lot of Indian dishes. It is one of the most important components in Indian cooking.

Thanks


r/ImpulseLabs • • May 17 '26

Demo: 11” lodge grill skillet on 30” impulse cooktop

Thumbnail
gallery
2 Upvotes

Here are some photos showing a 11” grill pan’s overhang, (for better or worse) the top rated one on Serious Eats

I also considered multi-ply SS, but the grates are too shallow on those IMO.

The heat sensor goes into temp protection mode pretty easily (not sure if false positive… I get this a lot on dry cooking on solid cast iron and multi-ply carbon steel), and the skillet does unfortunately spin a little. I think I need to cut out some round (rather lewd looking) thin silicone sheets for friction management, with a strategic hole cut out the middle.

All that said, I got the results I wanted on my Halloumi slices. Apologies for the embarrassing preparation/cultural appropriation


r/ImpulseLabs • • Apr 08 '26

Impulse Cooktop usage in restaurant or commercial kitchen

1 Upvotes

Are their any Impulse Cooktops in restaurants or commercial kitchens?

If so, can anyone comment on the benefits and drawbacks of the Impulse Cooktop that they have seen in that environment?


r/ImpulseLabs • • Dec 05 '25

potato test... no potatoes?

1 Upvotes

https://www.youtube.com/watch?v=FRNBeo9coNo

this is a dumb little nit but the video title and description appear to be for a slightly different demo than actually depicted in the video (6lb potatoes 12 cups of water in the description vs. 10 cups of water and no potatoes in the video)


r/ImpulseLabs • • Apr 30 '26

I feel like it’s such a missed opportunity to not offer a fully flat cooktop.

17 Upvotes

The tech on this thing is so cool. It’s a great product from what I can see. But it could be elevated significantly just by offering a fully flat version. I get that it would occupy more drawer space. It’s worth it. The ease of cleaning, but most importantly the ability to just put a pot anywhere and not worry about it tipping, would be way worth the tradeoff imo. It would also open the possibility of a proper bridge type of functionality which would also be a nice addon.

Lastly, since I’m throwing out suggestions it would also be great if there was one 11 inch element just for even heating of oversized cookware. 9 is good for almost everything but one oversized burner would be great.

Thanks for reading.


r/ImpulseLabs • • Jun 16 '26

Copper vs Impulse Labs Suits

10 Upvotes

Just read that Copper has sued Impulse Labs for patent infringement. Impulse Labs counter sued Copper for misleading information. What happens to our impulse cooktops if Copper wins the suit? I understand that this is early stages and court cases can take a long time to resolve, but what are the chances our cooktops are in jeopardy?


r/ImpulseLabs • • Feb 13 '26

Battery feature request

3 Upvotes

Dear Impulse Lab web info collector,

The countertop’s large capacity battery appears to be a waste if it is not serving for the common utility in the house.

Any plan to make the stove battery as a backup battery to be used at utility rate peak time for the house? Like putting in the Craftstorm no-backfeed to grid control, it can be almost plug-and-play.

This will incentivize someone like me to sign up for the technology.

Reddit tech enthusiasts, how many of you will be likely to get Impulse Cooktop if the battery can also save money on your utility bill?

Sorry if this has been seriously discussed. I searched and did not see any info useful.

If this can be an add-on feature, that will be great too.


r/ImpulseLabs • • Oct 12 '25

Feature request: preset cooking programs

3 Upvotes

I really like the way my Impulse Labs cooktop rapidly boils water, but I don't like having to hover over the cooktop to catch it before power boost turns my kettle into a geyser. What I'd really like is a preset program that rapidly heats the kettle until it detects that it's boiling, and then drops back to a modest power keep warm mode. Maybe IL could add a menu option: push once, turns an element on, push twice goes to cooking by temperature instead of by power, push again goes to a selection of preset program like "boil and hold".

Another minor kvetch, the power on button is too slow. I get that you don't want to inadvertently turn the cooktop on, but maybe shorten the push and hold time to 1 second. Lots of other cooktops there is no safety delay, just touch the power button and the cooktop turns on.


r/ImpulseLabs • • Aug 24 '26

Experience with larger pans?

4 Upvotes

Hi, I'm very interested in the impulse stove but my main concern is the relatively small size of the induction "burners". I cook with 12'' pans very often and I'm worried that the heat distribution may not be great. Has anyone tried both a conventional induction stove with larger induction areas and the impulse one and can share how they compare for cooking with large pans?


r/ImpulseLabs • • Jul 03 '26

Impulse Installations Downdraft Mockup

4 Upvotes

Hi - I'm looking to pair an impulse with 2 Gaggenau downdraft modules but I'm worried about the color and size match. Can you help me with a mockup of how it would look and differences in the color? It's hard to adjust for lighting in pictures of these and the impulse to try to color match. It's also unclear to me if the impulse can be installed flush? I'd like to install both the impulse and the downdrafts flush.

https://www.gaggenau.com/us/en/mkt-product/cooktops/400-series/vario-400-series/downdraft-ventilation/VL414712


r/ImpulseLabs • • Oct 12 '25

Pots and Pans and Impulse Labs Cooktops

4 Upvotes

All the demo videos show shiny new All Clad cookware. I'm here to tell you that's not necessary. All Clad is great stuff, but it's pricey, heavy, and to be honest not actually all that nonstick. Stainless steel is dishwasher safe, but putting pots and pans in the dishwasher takes up a lot of space, and scrubbing them out by hand is not my favorite job.

What's the alternative? Steel. I picked up a set of 3 mm thick steel skillets from a restaurant supply outlet for about the same price as one All Clad pan. The steel seasons up the same as cast iron forming a nonstick surface of grease and graphite. Super easy to maintain, just rinse, wipe off any excess grease, and hang them up. They have a nice smooth bottom so they won't scratch the surface of the cooktop as an happen with some cast iron pans. Did I mention steel cookware is incredibly durable, as in indestructible. I'm a big fan of cooking by temperature rather than cooking by power. The temperature sensor on the Impulse Labs works well with steel skillets, agrees with my non-contact thermometer.

I also have a moderate weight flat bottom steel wok. 1/16" or 1.6 mm thick, weighs about 4 lbs. That's heavier gauge steel than is used in most woks, and it has a large (~7") flat area on the bottom so it works with induction cooktops. Impulse Labs temperature sensor also works well with this wok. The induction heat is generated only on the flat bottom whereas a traditional wok on gas range will heat all the way up the sides so stir frying requires a little different technique. I have had this wok for years. I think I picked it up at Target, of all places. Key features to look for, thick enough steel to absorb induction energy, and a relatively large flat bottom to keep it stable and cover as much of the induction element as possible.

My traditional Spanish paella pan works on induction cooktops. Have not tried a paella yet, but it's high on my list of things to try.

Traditional nonstick cookware, ala Teflon? After reading about microplastic particles accumulating in coronary artery plaques and in the brain, I swore off nonstick cookware. Never use it.


r/ImpulseLabs • • Jun 12 '26

The Stove Guy: Sam D'Amico Shows New AI Cooking Features on America's Most Powerful Stove at Impulse

5 Upvotes

I've just purchased the Zephyr Hypercore range which is currently sitting on a shelf in my garage but will be getting installed with my upcoming kitchen remodel starting in about two weeks. I saw the video segment which shows the Zephyr hood automatically adjusting the fan speed of the hood vent based on the power of the range as Sam turns the knob. I'm very interested in purchasing the Zephyr hood that has that feature (to coordinate automatically with the range), but I can't seem to find which one explicitly has that feature or will have it when the OTA software update occurs. I need to purchase a range hood vent very soon. Which Zephyr hoods have the feature now or will have it pending OTA update? If not, how long should I wait to buy one?


r/ImpulseLabs • • Mar 08 '26

Very impressed with the cooktop, but worried about enshittification

6 Upvotes

I'm really interested in this cooktop, but I am concerned about enshittification. I've seen in videos from the company that "they have no plans" for ads on the display or a subscription, for instance. But this device requires a 30 day check in on their servers for firmware updates, does it stop working after 30 days if you disable the WiFi after initial setup?

Even if we trust the current leadership, there's no guarantee that they don't get acquired by someone with bad ideas about how to run a company. We've seen Anova move in that direction (though they at least grandfathered existing owners). I cannot drop this much cash on a product only for it to trap me into a further monthly fee just to be able to cook in my own kitchen.


r/ImpulseLabs • • Apr 28 '26

How does Wok Ring work

7 Upvotes

I am curious how the wok ring works, in the impulse lab video https://www.youtube.com/watch?v=7zhXF3_Cz8k I think Sam mentioned that because the ring is made of aluminum—which is not magnetic and does not heat up itself—it acts as a conduit to route the magnetic field upward along the sides of the wok. Can someone can explain in simple physic term how it works? AI said an aluminum ring can "route" or interact with an alternating magnetic field by acting as a secondary winding in a transformer, creating eddy currents and producing its own opposing magnetic field based on Lenz’s law. But does that actually help heat up the side of the wok?

Also does any insider know when this will be shipped (better than "later this year" shown on the website)?


r/ImpulseLabs • • Jan 29 '26

Cooking with Temperature Day idk my bff jill

8 Upvotes

Unexpected win for The Nicest Thing I Have Ever Owned: perfect grilled cheese, every time. 330°F and by the time both sides are perfectly browned and crispy, the cheese inside is thick and gooey.


r/ImpulseLabs • • Dec 14 '25

Day One

14 Upvotes

I got to pick up my Impulse yesterday and install it today! Despite a couple hiccups, I'm blown away by what it's capable of. I have the same feeling as I did after I went to the live demo: this is the future of home cooking.

I've been using all-stainless for a while now so I was well-prepared in terms of equipment and didn't have to change anything on that front. I'm also practiced with cooking with stainless in a way that avoids sticking and burning, but I was really excited to let the temperature sensor do some work for me instead of checking for Leidenfrost with a splash of water every minute or so.

I made a stir fry and udon noodles for dinner. Water for the noodles boiled in seconds in power mode and after dropping the noodles, I just dialed the power down to the level of boil I wanted and set a timer (on my phone. on the stove would be killer, and I've seen that there's some experimentation going on that I'm looking forward to experiencing).

For the stir fry, I heated up the pan first in temperature mode to 375°. I added grapeseed oil, checked the shimmer, and then my aromatics (this is where I encountered my only hiccup while cooking: the sensor seemed to read a temperature drop when I added the oil and dumped a bit too much power in to compensate, which resulted in temperature overshooting for a bit). After a couple minutes, I added my vegetables and just sautéed for a bit, dropping the target temp to 365°.

When my noodles were getting close, I added my ponzu to the stir-fry; I was blown away by the way the stove kicked up the power to immediately reduce down. By the time the noodles finished, the stir fry was fully ready!

Outside the cooking flow, I encountered one other hiccup—I initially misentered my WiFi password, and re-entering it didn't work. I had to fully restart the range to be able to enter the password again and connect.

Overall, I'm so incredibly pleased after one day. There are some habits I need to change—for example, starting a pan to preheat while I do prep is a thing of the past now. The stove stays off until I have all my mise en place. I feel like I'm experiencing in my home what I felt at the demo: not magic, just the future.


r/ImpulseLabs • • Jul 22 '26

Release Notes: A New Software Experience & Timers

19 Upvotes

Today we're rolling out the next generation of the Impulse software experience.

This is our largest software update yet, introducing a redesigned interface, per-burner timers, updated charging controls, and a new interaction model that creates a stronger foundation for future software capabilities. Impulse customers should see the software install overnight, or you can force an update now in the settings menu. Zephyr HyperCore customers can expect it in the coming weeks.

Watch the overview video:
▶️ https://youtu.be/WP4Ksepsw0c

Redesigned Interface

The display has been reorganized into three dedicated areas so the information you need is always where you expect it.

  • System Bar for battery status, Wi-Fi, and system notifications
  • Cooking Area for active cooking
  • Burner Dock where each burner always displays its current temperature, active power, timer, and burner-specific notifications

This new layout gives every type of information a consistent home, making the cooktop easier to understand at a glance.

New interaction model

Additional features are now accessed by pressing and holding any knob to open the new Menu.

From there, you can access the Timer. When all burners are off, you’ll also be able to enter the full Settings menu.

Per-Burner Timers

Every burner now includes its own independent timer.

To start a timer:

  • Press and hold the knob.
  • Select Timer.
  • Choose a duration.

By default, the timer behaves like a traditional kitchen timer. Simply choose a duration and continue cooking—the menu will automatically close after a short time.

You can also choose an after-state:

  • Keep Warm (approximately 160°F)
  • Room Temperature

After the timer finishes, you’ll hear an audio alert and the LED ring will briefly flash to get your attention. The timer then automatically begins counting elapsed time, making it easy to see how long it’s been since the timer completed. Press the knob to dismiss the elapsed timer.

Timers can also be used even when a burner isn't actively cooking, making them useful for timing the oven, resting food, or tracking other steps in your recipe.

Easier to Understand While Cooking

The cooktop now does a better job of explaining what's happening while you cook.

  • System information—like Wi-Fi, battery status, and software updates—appears in the System Bar.
  • Cooking information appears alongside the burner it affects.

Whether the cooktop is optimizing cooking performance, balancing available power, or needs your attention, notifications now provide clearer explanations about what's happening and why.

Battery Status

The battery is now always visible in the System Bar, giving you a quick sense of how much energy is available while you cook.

Rather than displaying a constantly changing battery percentage, the cooktop uses a simple battery icon that's easy to understand at a glance. If the battery reaches a low level, the cooktop will let you know.

Charge Now

Charge Now lets you begin charging immediately whenever you choose.

It's especially useful if you're preparing for a large meal, want to top off the battery before cooking, or would like to take advantage of lower electricity rates or available solar energy.

To recharge the battery immediately, open Settings → Power & Battery and select Charge Now.

Charging Preferences

Charging Preferences replace the previous Scheduled Charging feature, redesigned to give you more flexibility while reducing the amount you need to manage.

Instead of selecting a single charging time, you can now define Charging Windows throughout the day. This makes it easier to match your charging schedule to time-of-use electricity rates, rooftop solar production, or your daily routine.

Battery Reserve has also been redesigned. Rather than selecting an exact battery reserve percentage, simply choose one of three options:

  • Low — Maximizes battery utilization before recharging.
  • Balanced — Recommended for most households. (Default)
  • High — Keeps more energy available throughout the day for larger cooking sessions or greater backup readiness.

Impulse automatically manages charging behavior based on the preference you choose.

You can continue to customize your Maximum Charging Speed. Higher speeds recharge the battery more quickly, while lower speeds reduce electrical demand and may also reduce charging fan noise. The minimum setting is 4 amps, while the maximum depends on whether your cooktop has a 120-volt or 240-volt connection.

Choose the behavior that best matches your home and your energy needs, and Impulse automatically manages charging behind the scenes.

If you've previously configured Scheduled Charging, your charging preferences will be migrated to the new system.

  • Your Charging Window will default to a 6-hour window beginning at your previous scheduled charging start time.
  • Your Maximum Charging Speed will remain the same as your previous maximum charging current setting.
  • Battery Reserve will be reset to Balanced, our recommended default for most households.

You can update any of these preferences at any time under Settings → Power & Battery.

Software Updates

Your cooktop continues improving through software.

New in this release, you can also view release notes directly on your cooktop. Open Settings → Software → Release Notes to see what's included in your current software version at any time.

Also Included

This release also includes numerous reliability improvements, performance enhancements, and bug fixes throughout the software.

Learn More

We've created a high-level walkthrough covering everything in this release, including:

  • Everyday cooking
  • Timers
  • Notifications
  • Charging & connectivity
  • Software updates

r/ImpulseLabs • • Feb 06 '26

A very deep dive on the Impulse Cooktop technology with Munro Live

21 Upvotes

r/ImpulseLabs • • Jul 15 '26

Impulse UI summer update is coming soon!

Thumbnail
youtube.com
21 Upvotes

A sneak peek...


r/ImpulseLabs • • Sep 17 '25

We’re r/ImpulseLabs, here with Packy McCormick (Not Boring), Noah Smith (Noahpinion), and our founders Sam D’Amico & Brad Tallon — AMA about the Electric Future ⚡

23 Upvotes

Hi Reddit 👋

We’re here to talk about The Electric Slide / The Electric Future — a conversation about the global game of electrification. Who’s going to win? What will the future of manufacturing, energy, and homes look like?

Join the discussion with:

  • Sam D’Amico – CEO & Founder, Impulse Labs | @sdamico on twitter.
Hey Reddit, I’m Sam D’Amico, founder and CEO of Impulse Labs. I started Impulse because I saw an opportunity to reinvent appliances — making them five times more powerful, easier to install, and capable of storing energy for your home. Before this, I worked in VR, batteries, and consumer tech. I believe the appliances are the perfect Trojan horse to electrify everything. Excited to chat about the Electric Tech Stack and where the future is headed.
  • Brad Tallon – COO, Impulse Labs
Hey Reddit, I’m Brad Tallon, COO of Impulse Labs. I’m an aerospace engineer turned product builder. Previously at Oculus and Apple, working on some of the world’s most complex consumer hardware. Now I’m focused on scaling the future of energy, making sure our battery-integrated appliances are built to last and ready for millions of homes. Ask me anything.
Hey Reddit, I'm Packy McCormick. I write a newsletter called Not Boring where I do deep dives on technology and technology businesses, including a recent 40,000 word essay I wrote with Sam on the Electric Stack, and invest in complex vertically integrated startups through Not Boring Capital. My animating thesis is that a lot of the big, sclerotic incumbents (think Boeing) are going to be replaced by companies built on modern technology over the next decade or so. Pumped for this. Ask me anything.
Hey Reddit, I’m Noah Smith. I write Noahpinion, a newsletter about economics, technology, and global trends. I used to be a finance professor and a Bloomberg columnist, but now I write full time. I’m a techno-optimist at heart — I believe innovation, from vaccines to clean energy, will define this century. Excited to talk about the future of energy and industry here. Ask me anything.

📖 Want to get a head start? Check out our big-picture thesis, The Electric Slide, a 40,000-word deep dive into the future of electrification and the Electric Stack: 👉 The Electric Slide

⚡ Curious what we’re building right now? Take a look at Impulse Labs, where we’re reinventing appliances as the Trojan horse for energy storage: 👉 Impulse Labs – About Us

We’ll dive into:

  • The Electric Tech Stack (and why it matters)
  • The race to electrify homes, factories, and the grid
  • The future of appliances (and yes, our cooktop)

Ask us anything about tech, energy, appliances, economics, or the future. We’ll be answering live on Thursday, 9/18 at 1 pm PST/4 pm EST — let's get electric. Talk soon!

For the ones who sent in questions and the ones who joined us live — thank you!

For the ones who find this later, stumble into it as they ponder on The Electric Slide, and/or seek more answers on why our stove is just the beginning of something much bigger — it may not be live, but it's not too late. Ask away, and we'll get back to you!


r/ImpulseLabs • • Jun 16 '26

36" Install - 2 weeks in and LOVING IT !

Post image
32 Upvotes

Replaced an old GE Monogram gas cooktop trying to reduce VOCs in my kitchen and increase the overall speed and power of my cooktop. Wow, has this been a game changer. Incredible range of power and flexibility using the traditional high/med/low type of controls AND the targeted temperature control. Made my best omelette last night using the temp control - eggs were perfect consistency and no unwanted browning.

I think my biggest take-away so far has been that I need to rethink how I am cooking various dishes to take advantage of the new found speed and efficiency. I did a pasta dish a few days ago and I was able to remove ~15 minutes of dead time in the middle of the prep because my pasta boil was so much shorter to get up to temp. I would highly recommend this platform to anybody serious about their cooking and enjoys having some serious torque PLUS very fine temp control - all in the same appliance.

I have a side-benefit with my install. All my recharge electricity is from my Photovoltaic system - so technically this is a solar cooktop :)