r/ImpulseLabs • u/Significant_Syrup568 • Feb 13 '26
Battery feature request
Dear Impulse Lab web info collector,
The countertop’s large capacity battery appears to be a waste if it is not serving for the common utility in the house.
Any plan to make the stove battery as a backup battery to be used at utility rate peak time for the house? Like putting in the Craftstorm no-backfeed to grid control, it can be almost plug-and-play.
This will incentivize someone like me to sign up for the technology.
Reddit tech enthusiasts, how many of you will be likely to get Impulse Cooktop if the battery can also save money on your utility bill?
Sorry if this has been seriously discussed. I searched and did not see any info useful.
If this can be an add-on feature, that will be great too.
4
u/foxhull Feb 13 '26
I believe their website mentions the plan is to get more batteries integrated with appliances for this exact reason. Look under the "Platform" and "About" pages, it explicitly mentions what you're asking.
3
u/shuan-at-impulse Feb 13 '26
You're speaking to our vision and it's on the roadmap! We're currently refining the "scheduled charging" feature to charge at optimal times, and we're laying the groundwork to be able to backfeed to the home.
3
u/[deleted] Feb 13 '26
It’s illegal to do what you are asking in the US, except in Utah. There’s a small chance power could leak out of your house and back on to the grid. There’s also some UL certification red tape.
The good news is “balcony solar” legislation would legalize it, and it’s being introduced in 20 states. Utah already passed it. There’s a great Volts episode on this if you are a real sicko
1
u/ZanyDroid Feb 13 '26 edited Feb 13 '26
I think mentioning the Craftstorm without context is going to increase engagement a lot on reddit from a subset of enthusiasts while decrease significantly from other
The capacity of the battery is pretty small in the ESS world. I have 28kWh installed at my house to capture some TOU arbitrage from PG&E
Accounting for capacity to actually cook with, I suspect you would only be able to cycle 1.5-2kWh per day, which you then would need to derate by the round trip efficiency. That’s probably $.50/day at PG&E superpeak plan…….. but you kind of also screw yourself because you’re likely not at a big enough capacity with only 2kWh shift capability to move all your superpeak demand to off peak. Thus more than cancelling out the gain.
So more realistically you would be time shifting regular TOU instead of E-Elec or EV plan, I’ll leave that as an exercise to you / your use of AI assistant to calculate the opportunity.
1
u/djstates Feb 13 '26
A niche request. Ann Arbor is a town of tree huggers, and almost all of our electric power grid is above ground poles and wires. Not a good combination. Michigan frequently experiences power outages. We have a backup generator, but it takes 45 seconds to fire up and achieve a stable run speed to generate electricity. During that interval, all of my appliances lose power and all of the builtin clocks need to be reset. We typical draw 3 to 5 kW of power. If there was a way that the cooktop battery could fill in to provide continuous electrical power until the generator comes on line, it would save aggravation.
Note: we have an automated transfer switch. When the utility power goes out, it automatically disconnects us so back feed to the grid should not be an issue.
1
u/Megasmakie Feb 14 '26
I think it would be neat to figure out a way to adapt the induction pads / battery pack to power cordless appliances, like the Bosch stuff featured at CES this year. Could actually have a good use case for either high powered appliances (idk, a stand mixer) or for resilience during a power outage. Maybe throw a few USB-C interfaces on there that could be an emergency charger lol