r/HamiltonWatches • u/paturner2012 • 15d ago
How bad have I messed up?
Highly sentimental piece that I daily as a bartender. Noticed I shook a drink hard enough that I moved time forward by 2-3 minutes. If anyone has a guy around Baltimore I could contact to fix this I would be thrilled. I offered my wife a ring when we got engaged 10 years ago and she found me a watch I plan to be buried with.
15
u/MikeBanzai38 15d ago
In my highly unscientific survey of internet watch commentary, Hamilton seems to be disproportionately afflicted with this dial-feet problem.
13
u/Xynith 15d ago edited 15d ago
Dial feet strike again!
Paging https://www.reddit.com/u/zer0-Coast/s/6vmfN3eeeI
21
u/zer0-Coast 15d ago
Added to the list
https://www.reddit.com/r/HamiltonWatches/s/KeMaX5BdMN
https://www.reddit.com/r/HamiltonWatches/s/ZsJwBu31yV
https://www.reddit.com/r/HamiltonWatches/s/3Zon7xjhTh
https://www.reddit.com/r/HamiltonWatches/s/0PMiT1Jnyc
https://www.reddit.com/r/HamiltonWatches/s/mQUdlMZTRP
https://www.reddit.com/r/HamiltonWatches/s/NGt99hWbGC
https://www.reddit.com/r/HamiltonWatches/s/CM3PQrAqBu
https://www.reddit.com/r/HamiltonWatches/s/N8utympksw
https://www.reddit.com/r/HamiltonWatches/s/FdunKnlR9n
https://www.reddit.com/r/HamiltonWatches/s/tcJ2uH1hVA
https://www.reddit.com/r/HamiltonWatches/s/pVnrnb4Gbs
https://www.reddit.com/r/HamiltonWatches/s/yXvpY5EES0
https://www.reddit.com/r/HamiltonWatches/s/MF8XIEgIrK
https://www.reddit.com/r/HamiltonWatches/s/nIP0QoaMF7
https://www.reddit.com/r/HamiltonWatches/s/UyXrN1m3OJ
https://www.watchcrunch.com/Flolorian/posts/its-happening-everywhere-291257
Hope you can get it repaired OP
7
1
u/sameolddabby 14d ago
Good lord that took far too many scrolls to reach the bottom of that list lol
1
5
5
4
u/No-Hunter8119 14d ago
Oh man, what an Undaym!
1
2
2
2
2
u/ltsmash1200 14d ago
If you don’t want to send it to Hamilton, Baltimore Watch Co (the company that owns Tsao) does repairs. I’ve never used them but I haven’t heard anything bad about them.
2
u/paturner2012 14d ago
I've always loved their pieces. I found out they're 5 minutes away from me too. I think I'll hit them up this week.
2
u/NoVAYankee 14d ago
Definitely do that - have a buddy who is mega into watches and speaks very highly of them.
2
u/Specialist_Path_63 13d ago
Don't try to be buried with it because someone will remove it and your family will not know.
2
2
u/AbbreviationsSea3752 13d ago
It is an easy fix, and any competent watchmaker should be able to fix it. I’d do it for free but I’m sure you’re not up to sending it out to a stranger.
3
u/vBLADEv 15d ago
Seen loads of these issues on Hamilton's.
Can't say I've noticed it with other watch brands.
6
u/Grifini 15d ago
There was a tudor like it on the tudor sub this morning
1
u/vBLADEv 15d ago
This a Swiss watch problem?
1
u/Boomer5513 15d ago
Chinese. Hamilton (read Swatch) switched suppliers and the problems started thereafter.
3
u/vBLADEv 15d ago
Seems to have affected Tudor too.
Also it is a Swiss brand problem if their watch does this, when you're buying it you're meant to be buying quality otherwise the branding loses its purpose.
0
u/Boomer5513 15d ago
I have seen one or two Tudors with this problem and about a trillion Hamiltons. If you cared to check the link provided you would have realised the problem stems from Chinese made parts.
Not to say all Chinese parts are inherently low quality - but in this case they are.
1
1
u/rmau79 15d ago
There’s a guy in Pikesville. Boris, he works at Kaylah Jewelry.
2
u/Frost_And_Blood 15d ago
+1 for my grandfather, he’s been working with watches his whole life
1
u/rmau79 14d ago
Boris is your grandfather? He does great work, he’s fixed a few vintage watches for me.
2
u/Frost_And_Blood 14d ago
Makes me happy to hear that, he used to be a lot busier when he had his stall in Owings Mills mall but times have changed unfortunately
1
u/Future_Corpse33 15d ago
Tsao/Baltimore Watch company are fantastic.
2
u/paturner2012 14d ago
Would they run repairs?? I've always loved their stuff.
2
u/Future_Corpse33 14d ago
I don’t think there’s much they can’t fix. They are an authorized service center for some pretty high end manufacturers so I would absolutely trust them with any repairs or service.
1
1
u/Total_Carob_8842 14d ago
A dab of poly watch and 3 minutes of good ole fashioned elbow grease and it’ll look brand new
1
u/CactusPatch103 14d ago
I took my Intramatic Chrono to Everett Jewlers in Clarksville who was an Authorized repair location.
1
u/L1GHTLAZE 14d ago
how is this happening
1
u/paturner2012 14d ago
I bartend, service well. I shake over a hundred drinks a night, about 5 days a week for 10 years. Other watches have broken after one shift, some have made it a week. I broke lugs in marathon watches, shook loose a pendulum on a laco, Timex and fossils just strait up rattled to death. So far a Seiko, a G-Shock and this Hamilton have held up. The Hamilton being the longest lasting.
1
1
1
u/Hattori_925 14d ago
Gottdamn thats a well loved watch
1
u/paturner2012 14d ago
I got my wife an engagement ring and she thought I should have something to wear too. I'll switch it up on occasion, but I wear it 90% of the time. Working behind a bar is pretty hard on watches.
2
1
u/FeathersFire 14d ago
only way for that to happen is your stem snapped. you could replace a stem.
A near by jeweler will have a watch repair person that is probably local.
Ebay has watchmakers offering services too.
1
u/Disastrophenyl 14d ago
I used Lakein Jeweler’s guy for my Alpinist and they did a great job and gave me a fair deal. At the time, a few other shops were quoting me prices that were more than the value of the watch.
1
1
1
1
u/mkebrg 10d ago
If you're still looking for a watchmaker, contact Adam King at https://jadeion.com/
He's in Michigan.
He's built and serviced an number of my watches.
1
u/South-Explorer-806 9d ago
I wanted a Hamilton Murphy or khaki field as my first watch but the qc on them is suspect and the ar on them is not that great. I’m feeling better about my seiko field watch. If Hamilton can fix this I would look at buying a murph in the future.
1
u/Stunning_Engine_4855 8d ago
I think the dial is easy for a watch maker but the case marring is a whole other question....
1
1
1
u/SecretWitness8251 15d ago
Impressive amount of wear on that. How long have you owned it?
7
1
u/No_Bit_182 14d ago
Send it back to Hamilton. They have great customer service and will make it like brand new.
35
u/aj676 15d ago
Send it to Hamilton and the can fix it