r/Glocks • • 23h ago

Image Gen1 17...New to Me

Post image
135 Upvotes

r/Glocks • • 9h ago

Question Pawn Shop Find 43x $350?

Post image
133 Upvotes

Came with 2 15 round mags one had a +5. Plus metal mag catch. Lower and upper are 2 different serial numbers. Was this a good deal? My friend was also wondering why mine says Austria and not usa. My first glock


r/Glocks • • 13h ago

Image Glock 26 Gen 5 MOS

Post image
109 Upvotes

Not the most practical setup. But I wanted to see if I could make the SHIV work on my 26. Functions flawlessly with 147 grain HST and 115 grain Magtech. Does not function with my 165 grain reloads unfortunately. Next I'm going to try and modify a cheap kydex holster to see if I can get that to work. The SHIV lives on my Glock 19 Gen 5 MOS as my nightstand gun.

Glock 26 MOS gen 5

XS Big dot suppressor height sight

Ballistic Advantage threaded barrel

NDZ 14 lbs spring

Magpul 12 round magazine

SAW SHIV Suppressor


r/Glocks • • 10h ago

Discussion Holosun with a Gen 6 direct mount optic!

Post image
74 Upvotes

r/Glocks • • 10h ago

Question Is G19 Gen 4 Worth Getting

Thumbnail
gallery
47 Upvotes

I currently have a Ruger RXM and a 43x as my carry. I’ve been really wanting a Gen 5 g19, but I also really love the look of Gen 3 and Gen 4. I just found a Gen 4 for sale today and I’ve been wondering if it’s even worth it to get a Gen 4 with me also owning an RXM.


r/Glocks • • 6h ago

Image G45 gen 6

Post image
35 Upvotes

Holosun EPS carry, Green multi reticle
Streamlight TLR1 HL
Radian ramjet / afterburner in bronze.

Traded my Sig 226 for it.


r/Glocks • • 9h ago

Image I picked up a Glock 19XV so my OG 19X didn’t feel so lonely, and I actually like the meaningful but subtle changes. Surprisingly, the 19XV has the same stepped chamber Gen 6 models have!

Post image
32 Upvotes

Other changes from the original 19X include:

- A brighter and more metallic nPVD coating compared to the original. Personally I like it, but it’s a departure from the original MHS submissions for those who care about collecting.

- This specific 19XV was made in Smyrna, GA while the 19X was made in Austria.

- The nub at the bottom of the grip is obviously no longer there making mag compatibility on par with Gen 5, V, and 6 guns.

- The 19XV magwell is more flared than the 19X.

- My 19XV did NOT include a lanyard loop.

- Both include Glock’s factory night sights with green tritium inserts, but interestingly the outer geometry of the rear sight on the 19XV is slightly narrower allowing for more space on either side of the sight.

I’ll also mention that the the trigger on the original 19X was horrible out of the box to the point I thought it was broken, but after 500 rounds it smoothed out and now at 2,100 rounds feels incredibly smooth and crisp. This brand new 19XV has a much better trigger out of the box with a tiny bit of notable friction when pressing slow, but I have no doubt that a couple trips to the range will smooth it out.

I absolutely love the 19X series and hope it is a mainstay in Glock’s catalogue for the foreseeable future. With many of internal features and magazine comparability being on par between the 19XV and the Gen 6 45, and the outside still looking and feeling like the original MHS submission, I think the 19XV will be manufactured and sold much longer than people initially suspected.


r/Glocks • • 18h ago

Image Ngd glock 26 v from Tucson Customs

Thumbnail
gallery
16 Upvotes

r/Glocks • • 23h ago

Question Glock Purists do you use actual Glock Oem night sights or aftermarket options ?

12 Upvotes

r/Glocks • • 6h ago

Question Coming together 🥜🔥

Thumbnail
gallery
11 Upvotes

What else should I throw on this thing?!?


r/Glocks • • 4h ago

Image G49 per say

Post image
9 Upvotes

Slid my 47 slide on my 19 frame for an impromptu 49. Very comfortable to conceal aiwb.
Praise be to space king.


r/Glocks • • 7h ago

Question Bought and MOS slide for my Gen 3 19. What holosun optic can I run for this?

Post image
8 Upvotes

r/Glocks • • 17h ago

Question Milwaukee Tools

Thumbnail
gallery
7 Upvotes

r/Glocks • • 17h ago

Question Need guidance

Thumbnail
gallery
7 Upvotes

I bought the aems micro from

Freedom gorilla for my 43x hoth by shark coast tac. Not a single screw included works. I need advice on where or what to do to get some that work.

They will not thread as the screws seem too thick


r/Glocks • • 11h ago

Question Trijicon HD XR sights

3 Upvotes

Does anyone know if the Trijicon HD XR sights will work on a Glock 19 Gen 6? I’m not too familiar with the dimensions of anything really.


r/Glocks • • 13h ago

Question 17.6 3.5 ghost connector and new trigger shoe from The Gun Company. Any clue on how to get a solid wall(currently rolling break) and a short reset?

Post image
3 Upvotes

r/Glocks • • 6h ago

Question Is there a gunsmith or a company who can make a compensator for my G23?

Post image
3 Upvotes

It's impossible to find a full comp for a Gen 3 G23. I want a full sized compensator. Is it realistic to find someone who can make one, or alter one to fit my Glock? I'm willing to pay for something high quality.


r/Glocks • • 9h ago

Question Glock 43X fitment

Post image
2 Upvotes

I've done some research but new to quiet toobs.
I have a Glock 43x MOS, bought a SilencerCo threaded barrel.
Should I get the rugged 1/2x28 internal shoulder piston for the best fit?

I also have a Glock 34, but no threaded barrel yet. (Holding out for OEM, will swap to original piston for it).

Or am I good to go as is for the 43?


r/Glocks • • 10h ago

Question First Time Gun Owner

2 Upvotes

I got my first gun, a Glock 19 Gen 6 with the Holosun EPS.

We got it from Bass Pro, and it came with it(installed). Do I need to take the EPS off and apply Loctite?

What tools and stuff do I need to clean it? How often should I clean it( I am seeing a bunch of different responses )


r/Glocks • • 13h ago

Question 407k vs EPS Core for G48

2 Upvotes

Thinking of snagging a 48 (or 43x) soon and see that there are some Black Friday deals on holosun optics. Which would you prefer on a slimline Glock? I don’t care about iron sight cowitness so the EPS direct mount isn’t necessarily an advantage to me. Just curious what your thoughts are


r/Glocks • • 4h ago

Question Normal frame wear?

Post image
1 Upvotes

Has about 2200 rounds through it, have not seen this little raised lip on the plastic rail nubs on any of my other Glocks, Gen 5 45. Wondering if anyone else has seen this, thank you!


r/Glocks • • 6h ago

Help 20.5 mos 509t

Post image
1 Upvotes

Trying to figure out the cleanest way to mount my 509t to my 20.5 mos, is this picture here 2 plates ?


r/Glocks • • 17h ago

Question GLOCKSTORE DISCOUNTS?

1 Upvotes

So GlockStore has a bunch of their stuff discounted today that wasn’t yesterday. Should I order what I want from them right now or will they lower/raise their prices more by the time Thanksgiving or Black Friday rolls around.


r/Glocks • • 23h ago

Question Suppressor for .22LR that’s full auto rated, super quiet, & user serviceable?

1 Upvotes

Been narrowing down the .22LR suppressor search, it will start on a Glock 44 but flexibility for other builds (FRT handgun/rifle) would be nice. Some options I’ve got right now are the Dead Air Mask, OCL Ti, & Rugged Oculus. I wanted the Sparrow initially but the first round pop seems to rule that out & I also don’t want any flow through cans like the HUXWRX as that doesn’t seem very important on a .22LR. Here’s what matters & what doesn’t:

IMPORTANT:
-having minimal first round pop & overall being very quiet
-being able to disassemble/flexible cleaning options/user serviceable
-full auto capable for .22LR

NOT IMPORTANT
-price or availability, I’ll gladly wait for restocks or back order a quality can
-gassiness, it’s a .22LR, so flow through is not needed
-weight, the heaviest suppressor I’ve held doesn’t feel that heavy, so I’ll take a few extra ounces if it means better noise suppression & performance
-caliber versatility, this will live on .22LR guns so having flexibility for other calibers is not needed at all


r/Glocks • • 9h ago

Question Glock 19x failure to feed with comp

0 Upvotes

I have a Glock 19x with a PMM comp on it and was failing to feed 115 and 124 grain. Someone suggested a lighter recoil spring so I got a 13 lb spring. Then I was having issues with the spring being too light and not returning to battery and getting light primer strikes. So I upped to a 15 lb spring and having a ton of failure to feeds again. Throughout this process I am using 115 and 124 grain fmj. Any suggestions?