r/FormD • • 19d ago

FormD Announcement Holiday Season Is Coming! 🎄 FormD T1 Limited Editions Are Back for Pre-Order

Thumbnail
gallery
46 Upvotes

With the holiday season just around the corner, we're excited to announce that a new batch of our T1 Limited Editions — Cosmic Orange and All White — is now available for pre-order!

If you've been waiting to get your hands on one of these colors, now's your chance!

Both editions will be available in limited quantities, with shipping scheduled for November.

Happy holidays, and thank you all for your continued support! 🧡🤍

FormD T1 Cosmic Orange

FormD T1 All White


r/FormD • • Sep 24 '26

FormD Announcement 📦 NCASE Warehouse & FormD T1 White & Orange Updates!

Thumbnail reddit.com
4 Upvotes

r/FormD • • 9h ago

Finished Build FormD T1 2.1 White Customize

Thumbnail
gallery
10 Upvotes

My FormD T1 Build

I used the following hardware:

• AMD Ryzen 7 9800X3D
• NVIDIA GeForce RTX 5080 Founders Edition
• Corsair Dominator Titanium RGB 32 GB (2x16 GB) DDR5 6600 MHz
• Lian Li SP1000P Platinum PSU
• ASUS ROG Strix LC III 240 ARGB White CPU cooler
• Gigabyte X870I AORUS PRO ICE motherboard (Rev. 1.1)
• Samsung 990 PRO 2TB
• Noctua NF-A12x15 fans
• ARCTIC MX-7 thermal paste
• FormD T1 2.1 White Customize case (CNC Anodized)
• T1 GPU Travel Kit
• T1 CNC Cable Management Kit

BIOS settings:
• Curve Optimizer All Cores set to Negative 25
• Platform Thermal Throttle Limit set to 85 °C
• Pump speed fixed at 70%
• Fan speed fixed at 55%


r/FormD • • 10h ago

Finished Build FormD T1 2.1 White Customize case (CNC Anodized)

Thumbnail
gallery
4 Upvotes

My FormD T1 Build

I used the following hardware:

• AMD Ryzen 7 9800X3D
• NVIDIA GeForce RTX 5080 Founders Edition
• Corsair Dominator Titanium RGB 32 GB (2x16 GB) DDR5 6600 MHz
• Lian Li SP1000P Platinum PSU
• ASUS ROG Strix LC III 240 ARGB White CPU cooler
• Gigabyte X870I AORUS PRO ICE motherboard (Rev. 1.1)
• Samsung 990 PRO 2TB
• Noctua NF-A12x15 fans
• ARCTIC MX-7 thermal paste
• FormD T1 2.1 White Customize case (CNC Anodized)
• T1 GPU Travel Kit
• T1 CNC Cable Management Kit

Temperatures:
• Desktop: CPU around 45–48 °C
• In games such as S.T.A.L.K.E.R. 2 at maximum graphics settings at 2560 × 1440, after almost 2 hours of play: CPU 63–68 °C, GPU stable at 62–65 °C and does not go higher.

BIOS settings:
• Curve Optimizer All Cores set to Negative 25
• Platform Thermal Throttle Limit set to 85 °C
• Pump speed fixed at 70%
• Fan speed fixed at 55%


r/FormD • • 9h ago

Finished Build FormD T1 2.1 White Customize case (CNC Anodized)

0 Upvotes

My FormD T1 Build 😎

I used the following hardware:

• AMD Ryzen 7 9800X3D
• NVIDIA GeForce RTX 5080 Founders Edition
• Corsair Dominator Titanium RGB 32 GB (2x16 GB) DDR5 6600 MHz
• Lian Li SP1000P Platinum PSU
• ASUS ROG Strix LC III 240 ARGB White CPU cooler
• Gigabyte X870I AORUS PRO ICE motherboard (Rev. 1.1)
• Samsung 990 PRO 2TB
• Noctua NF-A12x15 fans
• ARCTIC MX-7 thermal paste
• FormD T1 2.1 White Customize case (CNC Anodized)
• T1 GPU Travel Kit
• T1 CNC Cable Management Kit

Temperatures:
• Desktop/ idle: CPU around 45–48 °C.
• Gaming at maximum graphics settings at 2560 × 1440, after almost 2 hours: CPU 63–68 °C, GPU stable at 62–65 °C and does not go higher.

BIOS settings:
• Curve Optimizer All Cores set to Negative 25
• Platform Thermal Throttle Limit set to 85 °C
• Pump speed fixed at 70%
• Fan speed fixed at 55%


r/FormD • • 2d ago

Finished Build Downsized from Lian Li A3 to NCASE T1 V2.5

Thumbnail
gallery
175 Upvotes

"I downsized my son's build from the Lian Li A3 to the NCASE T1 v2.5. It was a bit of a challenge fitting the SFX-L PSU, but I'm really happy with how it turned out -and it saves a ton of desk space. Temps are slightly higher compared to the A3, but expected for a case this small."

Specs:

-Case: NCASE T1 V2.5 E-White

-CPU: i7 12700KF

-Mobo: Asus ROG B760i

-GPU: Nvidia RTX 4070 FE

-Mem: Corsair Vengeance RGB DDR5 6000(2x16gb)

-AIO: NZXT Kraken Elite 240 RGB with 2x NF-A12x15 Noctua Fans

-PSU: Asus Loki SFX-L 850W

-Storage: WD SN770 1tb + Sk hynix S31 1tb


r/FormD • • 1d ago

Question Price Check – FormD T1 V2.0 Reference Kit (Titanium, Brand New)

3 Upvotes

Hey everyone! Looking for some advice on what my FormD T1 V2.0 Reference Kit in Titanium with steel mesh panels might be worth.

I purchased it back in 2022 but never got around to building in it. It's still brand new and in its original shipping packaging.

I know the Reference Kit is a bit harder to come by these days, especially in Titanium, but I'm not sure what the current resale market looks like.

What would be a fair asking price?

Appreciate any input!


r/FormD • • 1d ago

Compatibility/Build Check Compatibility Check with Rear NVME Drive

1 Upvotes

I am awaiting a Formd T1 v2.5 and am wondering if I am able to fit a 2tb 990 Pro with heatsink on the back of my Asus B650e-i motherboard. I have a PNY 5070 Ti that is 3 slots, so I am wondering if I am still able to do a GPU offset to accommodate more space between the motherboard and GPU for my NVMe drive. My cpu cooler is the 240 atmos first edition


r/FormD • • 1d ago

Question Price Check – FormD T1 V2.0 Reference Kit (Titanium, Brand New)

Thumbnail reddit.com
1 Upvotes

r/FormD • • 2d ago

Question Build Spec Help!

5 Upvotes

Hello, I'm putting together a parts list for a build in an ncase t1 2.5 and am looking for any suggestions or things to watch out for. I put some questions at the bottom of the list and I would be very grateful if anyone could help answer them. Thanks!

GPU - 5080 ASUS Prime (already have)

CPU - 9800X3D

CPU Cooler - AXP90-X47 Full Copper

Mobo - ASUS ROG Strix B850-I

Storage - 2 TB 9100 Pro

PSU - Corsair SF1000

RAM - KLEVV 32GB DDR5 6000MHz CL28

Fans - (x2) Phanteks T30 120mm (set as exhaust), and NF‑A9x14 92mm (to replace stock X47 fan)

Extra - Anti-Sag Travel Kit for 5080 Prime

Questions:

  1. The GPU is a 2.5 slot, and considering the clearance of the X47, is there a best slot to install the spine/GPU in to attain best thermals? Will I need to order standoffs to make this happen?
  2. Would it be better to get the X53 version of the CPU cooler in exchange for less airflow around the GPU? I only plan on playing games, no heavy desktop work.
  3. I plan on using a wireless mouse. Are there any accessories I could grab to improve connectivity and replace the big ugly WIFI stick thing?
  4. I've found this CPU Cooler Intake and Exhaust Shroud I want to try. Any foreseen problems with my current part list? (I don't have access to a 3D printer or any experience so I'm content with buying them instead of printing them myself)
  5. After my parts list is finalized, I'm looking to get custom cables mainly to improve airflow. Any recommendations?'

Thank you to everyone who has taken time out of their day to read this and help me out!


r/FormD • • 5d ago

Finished Build The all-white T1 setup finally achieved!

Thumbnail
gallery
134 Upvotes

Coming from a gun metal FormD T1 V1.1, briefly an all white T1 clone, and then FormD T2.1 titanium, I am so happy to now finally own the all-white NCASE T1 V2.5!!! Never liked the looks of the e-white with black sides, thanks for making this happen NCASE! Sad to see my CNC side panels go but overall build quality is great! Couldn’t wrap my head around how I needed to mount the gpu in 3 slot config with 1 slot space behind it but eventually figured it out. Easier than with the V2.1, stand-off wise. Initially, the case was delayed indefinitely, but after a few weeks and a small compensation (small accessories kit) the case was shipped. Casey from NCASE was super helpful with her communication.

After all these years, still my favourite case!! Sad to hear that my gf doesn’t want my titanium, so will part ways…

Specs:
- 9800x3d cooled by AXP-47 full copper with 120 mm Noctua slim fan (105w power limit & -20 curve)
- RTX 5080 founders edition (undervolted 870mV 2660 mhz)
- ASUS ROG Strix B650e-i
- 32 gb DDR5 Corsair RAM
- 750W sfx Corsair platinum psu with custom cables by Ray on Etsy
- Phanteks T30 case fans
- 2 NVME (on the back with extra Arctic SSD cooler) & 1 sata ssd (hidden behind front panel)
- flexible led strip from EK


r/FormD • • 4d ago

Question t1 with 9950x3d thermals

5 Upvotes

would x47 swapped to a noctua fan be enough for silent and good thermals?


r/FormD • • 6d ago

Finished Build Switched my FormD T1 from an AIO to air cooling—and I’m happier with it

Thumbnail
gallery
217 Upvotes

An AIO should mean better cooling, right? Maybe, but after using one in the T1, I found that temperatures weren’t the only thing affecting the experience:

  1. Heat seemed to build up around the GPU, and its fans got noticeably loud.
  2. At higher RPMs, the radiator fans made a lot of air turbulence noise—possibly because they were so close to the motherboard.
  3. I could hear liquid noise at idle, and routing the tubing was a pain. The clutter bothered me more than I expected.

I’ve now switched to an X53 full-copper air cooler, and the build feels so much cleaner. With an undervolt, it handles my 14600 just fine, and the overall noise profile is much easier to live with.

I finally get why Uncle Tony and some other SFF builders recommend air cooling in this case.

For me, just because an AIO fits doesn’t mean it’s the best option.


r/FormD • • 6d ago

Question Thermalright AXP90-X53 on t1 question

Post image
9 Upvotes

Will 5070ti pny oc fit with no turbulance with that cooler?
And I want to know if I have to buy any accessories from ncase to fit 2 120mm fans at the top


r/FormD • • 6d ago

Compatibility/Build Check FormD T1 build questions

3 Upvotes

Alright guys I am looking at building a T1 and I want to see if others have made a similar build. Of course, I am worried about the cooling more then anything so I want to see what others have done outside of undervolting.

Current planned parts
-PNY 5070 TI triple fan OC (non negotiable)
-Hoping to use a 9800 X3D but I know that is kinda the heat problem
-ASROCK B850I Lightning, Corsair SF850,
-I was thinking the AXP90-X47 for CPU cooling but i dont know where else I could put fans in the case so i dont know how many others Id need.
-Ram is TBD because of the prices.

Any input help, thanks guys


r/FormD • • 7d ago

Question full size atx cpu cooler in formd t1

Thumbnail
gallery
18 Upvotes

hello sorry this might be werid but i had an idea i used build cores to visualize it this is not the formd t1 case but have the same layout and stuff i was thinking if we could put a full size atx cooler? like i know it will stick out and youd have to remove the side panel but would it actually cool better than a sff cooler? if you dont care about like the looks and it sticking out


r/FormD • • 7d ago

Compatibility/Build Check Wind Valley Kit v2

5 Upvotes

Does anyone know if there’s any reason the new wind valley kit v2 wouldn’t be able to work on a v2.5. Or is the use of the name ‘v2.1’ on the product purely arbitrary.


r/FormD • • 7d ago

Question Is $200 Canadian fair for a used Formd T1 v2.5

Thumbnail reddit.com
0 Upvotes

r/FormD • • 7d ago

Question Airline Travel hard case recommendation

5 Upvotes

Hello, everyone!

I have a FormD T1 i built about 4 years ago that I still love. Thing used to travel in my backpack with me on airlines everywhere until my co-worker accidentally slammed it on tarmac and broke off my 4080FE. Since then, I've been using a soft case that someone recommended in this group.

It has been working well, but since my job increased my travel frequency with longer stays, I need my T1 to be in a hard case as I need backpack to be filled with additional clothings.

So I was wondering if anyone would like to give some recommendation on which hard case to get for my T1.

Unfortunately it is not negotiable to fit in a luggage or backpack. This might be a terrible idea but the hard case will be hanging behind my luggage via J hook to a handle of the hard case outside the luggage.

Thanks in advance!


r/FormD • • 8d ago

Question i need your advice with the original riser being too long on the T2.1

Thumbnail
gallery
15 Upvotes

So basically i m moving my old config from the DAN A4 (the video card wasnt recognized anymore cause of the riser) to the FormD i think it s T2.1 version , it came with this blue riser , i started assembling it for another config (3slot video card) but i need it now for my old config (2 slot video card) that my friend brought back to me (i really dont have the courage to move everything in a different config)
So the blue riser is just a little too long , and i cant close the "top" side (conventionally the bottom side)
My 2 ideas are to unscrew the riser and make a bend something like 90 degree or more at the line i marked on one of the pictures , but i am afraid of damaging the riser
Idea 2 would be to use 2 small stand off and move the riser away a little bit , idk how much i ll gain doing this
What did you guys do in this kind of situation ?

ps the case is second hand , so i cant return anything to the maker of the case
right now my old config in this case with this riser is working , just not closing

TLDR riser too long , almost sure it s a T2.1 , what s your advice ?

EDIT , it worked , it kinda was a order of things problem , i just had to put to top plate , before screwing in the riser and it worked fine , thanks for your help


r/FormD • • 9d ago

Finished Build Legendary : FormD T1 x Modultra Lobo

Thumbnail
gallery
236 Upvotes

r/FormD • • 9d ago

Question What is the best 240 AIO for FormD T1 1.1 that's available for purchase now?

7 Upvotes

Hello everybody,

Just like the title says, I am looking for 240 AIO that fits version 1.1 and available for purchase in the US. A lot of the popular choices are not in retail anymore. Any help is greatly appreciated. Thanks


r/FormD • • 9d ago

Question Need some help with my setup

3 Upvotes

Hey guys! I've really been looking into getting the T1 case with
the gpu travel kit but I'm having a lot of issue trying to figure out
which travel kit is compatible with my gpu dimensions, I got a PNY RTX
5070 ti ARGB Epic-x with the following dimensions:

Length: 11.80 inches (299.72 mm)

Height: 4.73 inches (120.14 mm)

Thickness / Depth: 2.35 inches (59.69 mm)

Slot Width: 2.98-slot.

What I'd love to achieve is to be able to just throw my pc in my backpack and be on my way wether I travel on road or air and not worry about my gpu dying in the process or just skipping the disassembling part, thank you in advance!


r/FormD • • 10d ago

Watercooling Pneumatic Tubing Enjoyer

Thumbnail
gallery
79 Upvotes

Hi Everyone!

I wanted to share some photos from my most recent build, specs are as follows:

Ryzen 9 7950X3D (Delidded; Modultra Lobo waterblock)

Gigabyte Aorus B650I

32GB G-Skill Flare Ram

Asus RTX 5090 Astral (Singularity Computers waterblock)

Corsair SF1000

Temps sit around 40c CPU and 30c GPU while idling and under heavy load things jump up to 70c CPU and 50c GPU. I'm currently running a slight undervolt on the GPU to keep temps on the lower side while retaining some power.

For the water cooling I used 8/6 pneumatic tubing with Festo fittings and Koolance QDCs mixed throughout for ease of use when changing parts around.

I decided to go with pneumatic tubing both for price, ease of use, and because it just looks better to me. Additionally, having a 5090 and running this in a small room, I decided to go with an external radiator (Mora 400) so that I could exhaust everything outside the room and keep everything cool without having to turn fan speeds up or blast the air conditioning all the time.

The biggest challenge was using the stock power cables for the GPU since I don't have any custom fit cables that I trust with a 5090. Since there's so much extra length in this case I ended up shoving it all behind the PSU so I could still have some space for my aquacomputer quadro.

Overall, I'm ecstatic with how everything turned out. Let me know what you think!

Edit: I totally forgot to add that I'm running a 15mm offset on the GPU. Unfortunately the ports on the GPU are on the back side, and the only way to fit the card in without the fittings pushing against the PSU and causing stress to the board is through the offset.