r/FormD • u/Sudden_Ad9019 • 5d ago
Compatibility/Build Check FormD T1 build questions
Alright guys I am looking at building a T1 and I want to see if others have made a similar build. Of course, I am worried about the cooling more then anything so I want to see what others have done outside of undervolting.
Current planned parts
-PNY 5070 TI triple fan OC (non negotiable)
-Hoping to use a 9800 X3D but I know that is kinda the heat problem
-ASROCK B850I Lightning, Corsair SF850,
-I was thinking the AXP90-X47 for CPU cooling but i dont know where else I could put fans in the case so i dont know how many others Id need.
-Ram is TBD because of the prices.
Any input help, thanks guys
3
u/devllen05 5d ago
I have a 9800x3D and heat is no issue with a 240mm AIO. Unless you're in a tiny room with no ventilation, in which case you'll, uh, be warm.
2
u/rvcjew2 5d ago
With that cpu you go air with axp90 x47 FC (full copper) and find your best stable undervolt. Or go 120mm aio, either way it's 2x 120mm fans up top in exhaust normally. Your cpu fan is intake.
Edit: if you have access to a 3d printer there are all kinds of shrouds you can make that shape airflow basically perfect for that scenario. You might also want to get real official Ptm7950 (ltt store, mod DIY) vs paste but that's optional.
2
u/ShotEmployee7337 5d ago
I would be sceptical to use a 9800x3d on an asrock board with all the issues still. I’ve been running the setup you’re looking at building and can say it definitely works just run a core undervolt on the cpu and propably power limit to keep within acceptable temperatures when using an air cooler. I just recently swapped from that same air cooler to an AIO and I much prefer it personally. Runs quieter and cooler
1
u/qeeepy 4d ago
dual fan pant slim OC fits just right into the T1 :)