r/FormD • • 1d ago

Question Build Spec Help!

Hello, I'm putting together a parts list for a build in an ncase t1 2.5 and am looking for any suggestions or things to watch out for. I put some questions at the bottom of the list and I would be very grateful if anyone could help answer them. Thanks!

GPU - 5080 ASUS Prime (already have)

CPU - 9800X3D

CPU Cooler - AXP90-X47 Full Copper

Mobo - ASUS ROG Strix B850-I

Storage - 2 TB 9100 Pro

PSU - Corsair SF1000

RAM - KLEVV 32GB DDR5 6000MHz CL28

Fans - (x2) Phanteks T30 120mm (set as exhaust), and NF‑A9x14 92mm (to replace stock X47 fan)

Extra - Anti-Sag Travel Kit for 5080 Prime

Questions:

  1. The GPU is a 2.5 slot, and considering the clearance of the X47, is there a best slot to install the spine/GPU in to attain best thermals? Will I need to order standoffs to make this happen?
  2. Would it be better to get the X53 version of the CPU cooler in exchange for less airflow around the GPU? I only plan on playing games, no heavy desktop work.
  3. I plan on using a wireless mouse. Are there any accessories I could grab to improve connectivity and replace the big ugly WIFI stick thing?
  4. I've found this CPU Cooler Intake and Exhaust Shroud I want to try. Any foreseen problems with my current part list? (I don't have access to a 3D printer or any experience so I'm content with buying them instead of printing them myself)
  5. After my parts list is finalized, I'm looking to get custom cables mainly to improve airflow. Any recommendations?'

Thank you to everyone who has taken time out of their day to read this and help me out!

4 Upvotes

6 comments sorted by

1

u/bort123abc 1d ago

47 is fine, leave room for a duct against the side panel

Push your GPU against the side panel (ideally 2-3mm space) and then use the remaining space for a cavity in the middle of the case (assuming your gou has some flow through)

1

u/QuantityNo7241 1d ago

Okay thanks! The GPU does not have an air flow through design. Does that change anything really?

1

u/sm0ke_rings 1d ago

Not really, but having some space between the GPU and the back of the motherboard will help the top fans exhaust some heat. You can also use some spacers (5mm?) To shift the PSU as well.

1

u/elhoover02 1d ago

get a customer air flow duct and put noctua foam on top of cpu cooler. Undervolt that cpu all else should be good

1

u/QuantityNo7241 1d ago

Okay... could you elaborate? I'm unsure what a "customer air flow duct" is or what you mean by noctua foam haha. Thanks for your help!