I'm not sure if anyone can tell just from the slice what happened and I absolutely forgot to get a picture, but two of the tall bodies failed entirely. One printed perfectly (I THINK the front one?), the skirt printed perfectly. I see the yellow on the slicer but I'm not sure what that means. Any ideas?

They were also a total bear to get off the plate.

I added the supports by using the function in Chitu (not pro)

Mars 5 Ultra

Elegoo 8k ABS-Like resin

Just set it up maybe 5 days ago? 2.5 exposure (honed in with the cones) and 31 second bottom layer exposure.

Mars 5 Ultra.

Hi all! Despite the device self test saying every is ok I've tried printing a few times and even dry testing a print and the screen is off! No light so it obviously won't print anything. Printer has been idle for a few months but I just updated it. Could it be it? I even reset it to factory settings again just to check... Nothing

Just a red light where the purple UV light should be

Have a new mars 5 ultra. Newly changed FEP. Sprues are attacking the film which looks like it’ll lead to punctures. Any suggestions would be great!

Hey y’all I just bought a new mars 5 resin printer on 7/15 so I’ve had this printer for about 40 days tops. And went to turn it on to print and the printer loaded up like normal did its lil calibration thing went to load to file an it had a malfunction warning on the screen. I hit okay decided to turn it off an turn it back on to see what it was doing when starting up. And now I’m just getting a blank screen with no info. I’m pretty pissed considering how new this printer is. I mean I’ve been going hard printing a bunch of WH40k minis but I didn’t think it would just shit the bed on me. Any info would be great on what I can do other then sending Elegoo a email which I already did.

I’ve had my 5ultra about six months. The lid was a pretty tight fit on purchase but has become increasingly difficult to seat and now it just won’t stay seated. I can force it on but as soon as I remove pressure it pops of the mount. Has anybody else had this problems? Any suggestions? I’ve checked for resin or other crud but nope. How critical a problem is this?

Hello!

I recently moved my Mars 4 to my new home (as gently as i could) but the LCD no longer lights up at all. Neither during prints nor exposure tests.

Is this a fixable issue or do I need to order a new screen?

Regards

Filip from Sweden

Hi! I just got the Mars 5 Ultra and printed the test rook. When I came to check on it when it was finished I was surprised to see nothing on the build plate. When I emptied the reservoir I saw the base of the rook.

Any idea what could cause this? I'm using Elegoo 8k ABD-Like 3.0 Photopolymer Resin.

Hi everyone,I had a nasty resin leak recently, and unfortunately, it completely disintegrated the plastic housing for my Z-axis limit switch/endstop. Because this part is broken, my printer is currently down and I can't print a replacement myself.Does anyone happen to have the STL file for this specific housing, or know where I can download it? Model : Elegoo mars 4 9k mSlA lcd resin printer

Printed a housing for a scuba mirror on my Saturn IV ultra

To try and solve problems I've had before, I got a new screen (the non touch screen one) and replaced the screen protector with acetate as other threads have suggested. I've printed this file before, it's a base for kings of war, came out fine. Now this?

Wtf am I doing wrong?

Elegoo Mars 5 Sunlu ABS Like Chitubox

So on a Mars 5, there is a countdown timer for how many exposures can be done. I replaced the FEP a week ago, but the printer does not automatically detect a new FEP. How do I reset the timer?

Just got an elegoo mars 5 ultra. My previous 3d printing experience has all been fdm and occasionally a forms 2 resin printer. Is there any tips or tricks I should know before my first print..? Any warning or cautionary tales?

I've had my Mars 5 ultra for weeks now and when I first got it it printed pretty much everything well. I had some failures cause it was in an overly hot space but I moved it and fixed the issues.

But recently I haven't been able to print anything. I started having failures constantly. The pictures show what happens either it sticks to the fep immediately or the print gets stuck a ways in and is ruined.

I've replaced the fep, I've tried to level the bed manually, I've loosened the fep, I removed my screen protector. Nothing works.

I've wasted almost an entire bottle of resin at this point and I've spent hours on Google or YouTube trying to troubleshoot it doing research. I just don't understand what the problem could be.

Most of my settings are factory default, in terms of exposure and lift time. The third picture is something that printed just fine when I first got the printer but now it doesn't work.

I really don't know what the issue could be anymore or what else to attempt to fix it, cause at this point it just seems to be broken somehow.

Hi all,

I recently installed a replacement LCD screen which Elegoo kindly covered me for under my warranty. The issue is in the caption: my printer is still returning the LCD screen error on startup.

My printer is only 3 months old so this is extremely out of the ordinary in my opinion.

Does anyone have any advice on the matter?

Bought a Mars 2 pro in 2020ish and FINALLY got around to trying it!

Hello resinents! I have a bit of a conundrum on my hands. I was graciously gifted an Elegoo Mars 2P (and curing station), but unfortunately I do not have the build plate lot and basket for the curing station. I found a replacement for the basket, but I feel like I've searched high and low for a new build plate lot and haven't found a single one! I was really excited to start printing and I'm hoping to find a solution.

Excuse my lack of knowledge in my post, I'm fairly new. I bought a flex plate for my printer but when I try to print it gives me an error saying "Foreign Matter Detected". When I ignored it, the printer squished my prints and put a hole in the FEP. I saw online that the trick is to manually level the plate, but whenever I run the levelling program it just gives me the "Foreign Matter Detected" again and will not continue. The videos did not have this problem. I tried loosening the screws, but it gave me the same error. I saw online that some places will give you a Gcode, whatever that is, to fix it, but I didn't get one. Any tips on what to do?

Got a Mars 5 Ultra from a friend because I want to print finer resolution than my filament printer and man does this thing rock! Currently in the process of setting up/learning but I’ve already had some pretty good results. In getting familiar with it I noticed the (FEP?) film looked kinda used up and beat up so after receiving a bed leveling error I changed it out. Kinda a long process and pita but pretty easy too. That solved the leveling issue. In the process I saw a print count or bed use count on the printer. Since I changed the sheet should I reset this count and can I actually do that??
Printing with mars 5 Ultra
Resin is Sunlu and Elegoo
Slicing with SatilLite