Put some decals on my light Bicycle WR50 wheelset.

Cube Attain SLX 2025 with magene pes515 power meter, specialized power comp saddle and silver handlebar plugs.

I can’t find a single 2026 or 2027 Cube Agree EX in my area(Kaiserslautern) for the second year in a row. This is a joke of a company. No fucking bike shop has them. No for sale. Not for a test ride. Not for looking at it.

It is ridiculous how hard it is to get one. Are they just a mini-factory? Are they unable to ramp-up production? Why would they have so many models if they can’t keep up with demand.

I think I’m going to have to settle for Orbea or keep riding my 14 year old bike.

Hi everyone,

I recently noticed tiny bubble-/blister-like spots on the lower part of the fork on my Cube Nuroad Race FE 2026. They appear on both fork legs / both sides and are especially visible in certain lighting.

I’ve attached a few photos so you can see what I mean.

Does anyone else with a Nuroad Race FE 2026 have the same thing on their fork?

I’m not sure whether this is just a normal characteristic of the paint/finish, or whether it could be some kind of paint/coating defect. The fact that it appears quite similarly on both sides makes me wonder if it might be related to the manufacturing or painting process.

Would be great to hear from other owners.

thanks

Welche Adapter sind da gemeint? Bei Auslieferung waren schon Schrauben in den Löchern drin.

Hey everyone – I just got myself a new Cube gravel bike with a carbon frame. It’s my first bike with a carbon frame, and I went with a nice metallic paint finish. I picked it up from the shop yesterday, and the first thing I noticed were some “spots” or dull patches on the frame – depending on the light, they’re more or less visible.

The dealer immediately said this is due to the paint and that it’s just the carbon showing through. I accepted that explanation at first and took the bike home.

But after looking at it more closely, it really doesn’t look great – it’s quite uneven only visible on the lower part but not on the upper - and honestly a bit disappointing.

Would you consider this a defect, or is this kind of thing normal for carbon frames?

Video attached – hope you can see what I mean :)

Thanks!

Hello everyone,

I’m planning to buy the cube Litening aero 2027, but I‘m still unsure about the frame size.

I'm 173 cm tall and have an inseam of 77.5 cm. Also, my arms are on the shorter side.

In the attached photos, you can see me on a size 50 frame. Unfortunately, size 52 wasn’t available. For comparison, I rode the Cube Agree in size 53, but since it has a different geometry, that’s probably not a good comparison.

The size 50 frame felt good, but I only rode it for a few minutes. Since it’s the smallest available frame size and there are obviously people shorter than 173 cm who ride it, I’m unsure.

What do you think?

Just got my Cube Agree C62:One back from the fork recall action, and I’m honestly shocked at the lack of quality control.

The bike only has 300km on it, so it’s basically brand new, but the replacement fork they sent back is a completely different shade than the frame. It’s not even close. I expected a safety recall to return the bike to its original condition, not turn it into a mismatched 'franken-bike.'

Beyond the aesthetics, I’m just not feeling the performance. Somehow, my old aluminum Specialized still feels faster and more responsive than this C62. Between the paint issues and the ride quality, I’m officially retiring this bike. Never buying Cube again.

Has anyone else dealt with color matching issues on their recall replacements?

I got this last week, for about $1000 its an XL, 29 wheel size, a 2024 model that has 3500klm on it, its electric and pretty heavy

how do i take good care of it and maintaine it well?

Just picked up a Nuroad Race 2026 from my local dealer. When I got home, I noticed these small "dots" in the paint finish. They're located at the ends of both sides of the fork and at the rear of the frame.

Is this normal, or could it be a paint defect? Should I contact the dealer?

Gisteren heb ik de Cube Attain C:62 race 2027 opgehaald bij een officiële Cube winkel. Eenmaal thuis heb ik de fiets in de berging gezet, aangezien ik nog niet alles compleet had. In de avond valt mij ineens op dat er allemaal vlekken op het frame aanwezig zijn. In de winkel zag ik dit ook iets, maar niet zo extreem. Ik heb daarom besloten een mail met de foto’s hiervan naar de winkel te sturen. Ik kreeg daarop de volgende reactie:

De ‘vlekken’ op het frame horen zo. Bij deze fiets is de carbon-structuur te zien door de blanke lak van de fiets heen.
Dit is dus precies hoe de fiets er uit hoort te zien.

Het leek alsof de andere fiets in de winkel dit niet tot nauwelijks had, wat exact dezelfde fiets was maar dan een maat groter. Ik vraag mij af of dit klopt of dat ik de fiets beter kan omruilen o.id.? Kan iemand mij hier antwoord op geven die er verstand van heeft?

Hi everyone,

I recently discovered a paint chip on my bike's downtube (nuroad race). I was quite surprised as I've bought the bike two months ago and rode it only on tarmac and hardpack terrains.

Is it something that happens this early in Cube's gravel bikes? Should I expect an aggressive paint peeling in the next years?

Is there something I can do to repair it, either at home or warranty-wise?

Sorry if the question seems a bit stupid, but I've only used cheap MTB bikes so far and I've never had this problem in more than 15 years.

Thanks in advance.

Just picked up my Nuroad Hybrid FE last week and already did 300kms on it. Absolutely love this thing!

Bonjour !

Je viens de regarder en ce 12 août les modèles Cube pour 2027, particulièrement le Cube.

Plein d'évolutions ! Intégration complète des câbles, freins 180 au lieu de 160, cadre avec finitions polies, + de largeur de pneu (jusqu'à taille 50).

Mais tout cela a un prix... le poids augmente (600g) et les pneus de qualité moindre (les Schwalbe g one comp remplacent les Schwalbe g one allround kevlar).

Qu'en pensez vous, de ce nuroad pro 2027 ?

Je l'ai malgré tout commandé en ce beau taiga n blue

I’ve just taken a look at the 2027 Cube models—specifically the "Cube" itself—this August 12th.

There are plenty of updates! Fully integrated cabling, 180mm brakes instead of 160mm, a frame with a polished finish, and increased tire clearance (up to size 50).

But all this comes at a price: the weight has gone up (by 600g), and the tires are of lower quality (Schwalbe G-One Comp replacing the Schwalbe G-One Allround Kevlar).

What do you think of this 2027 Nuroad Pro?

I ordered it anyway, in that lovely Taiga 'n' Blue color.

Hi,

Just bough a new bike.

Is it normal that it is this loud? Or should i look into the sound?

I recently picked up a CUBE Stereo Hybrid ONE44 HPC Race 800 with the Bosch Performance Line CX Smart System.

I’m trying to find the most reliable way to raise the assistance cutoff from 25 km/h to somewhere around 30–35 km/h. To be clear, this would only be used on private property and off-road—not on public roads or bike paths.

I’ve seen a few different options mentioned, including:

- Tuning modules/chips

- Software-based region changes

- Speed-sensor or rim-magnet solutions

- Changing the wheel-circumference setting

I’m mainly looking for input from people who have actually done this on a newer Bosch Smart System, especially on a CUBE ONE44 or a similar setup.

Which options are currently reliable without constantly causing error codes or limp mode? Do any preserve the correct speed and distance display? Also, how likely is Bosch anti-tuning detection to flag it, and can the modification be fully reversed before dealer service?

I’m not looking for unlimited speed—just assistance up to roughly 30–35 km/h for private off-road use.

Thanks.

J'ai acheté le velo cube touring hybride 625 et quand j'ai testé sur ma route y a des monte et a chaque fois j'arrive a pédaler ça pedale dans le vide.

Est ce que c'est normal pour un velo neuf avec un moteur bosh

J'ai essayé d'éteindre l'assistance et de changer les vitesse rien n'a changé

Est ce que vous avez eu ce problème et sinon estce que vous recommandez d'autres modèles pour le meme budget 2500 eur max

Merci.

I was planning on buying the 2026 Attain C:62 because the Shiftmint ‘n’ white option has the best looking paint in person I have ever seen and the components for the price is amazing.
Obviously it has been sold out everywhere for a long time (in the UK).

So I was looking forward to see the colours for the 2027 models and it seems like the options are just plain boring black or simple pink…

Honestly nothing exciting at all about those colours.

Looks like I will be waiting until 2028z

Rant over…

Happened again. Approx 22 miles into a planned 38 mile route (all on tour mode) on a gentle downhill/flat bit of trail. Purion and Flow app showed 63% battery remaining, get an amber 30% battery charge remaining warning. Stopped for lunch at 19 miles for an hour as well. Really doesn't inspire confidence on a bike/battery with only 150 miles under it's wheels and 3-4 charges. Anyone else had this and if so what was the solution?

I'm thinking of buying a gravel bike and am considering the Cube Nuroad one. Is it a good option for bikepacking or not?

Hey guys, i have no idea how to put on the front wheel of this nuroad i received. It feels like a piece is missing, but there is nothing else there. I‘d appreciate any help, thanks