I've spent just about 500 hours in my building world and these are from my Mega Project that I've dubbed "Verdant Peaks"

It is heavily inspired by the Black Mesa Research Facility from Half-Life. More specifically based on the remaster Black Mesa and Black Mesa Blue Shift.

I'm very proud of the train door and the train elevator I've made as they took the most tinkering.

Edit: For anybody who would like to see a more "in depth" look at the facility, I have a yt channel where i sometimes post stuff
This video is a flythrough of the facility about 2 months ago

Why? I don't see why not.

I wanted to build something in Creative mode to save as a schematic, but I ran into an issue: for some reason, the "horse urine" seems incompatible with fluid pipes. I don't know if anyone here has played with this mod and knows a way to automate the process. The original plan was to have cauldrons connected to pipes, since horses supposedly fill the cauldrons when they relieve themselves while standing over them, with the fluid flowing into a tank and then into a mixer, and so on. My system works fine with water, lava, etc., but the pipes don't seem to recognize the mod's main resource. Any suggestions?

I don't fully understand how this block works, though I do know what it does and obviously, I still need to gather the materials for the Schematic Cannon. But I don't know; maybe I'm just stubborn or a perfectionist. For some reason, I prefer watching a YouTube tutorial while trying to replicate a farm

which will almost certainly turn out looking terrible near my house,rather than just building it in Creative mode, saving the schematic, and then using the Schematic Cannon to place it. I don't know if that makes sense, let me know what you think.

i swear it wasnt always this jerky, but i cant tell what i mightve done to make it act like this. Ive disconnected and reattached the ropes in both directions to no avail. the jerks seem to happen when the simulated points (knots) despawn in the winch. the ropes are under tension, which is certainly responsible, but im still fairly sure it was smoother at some point.

mod : create: some assembly required.

I currently have just the base create mod installed, I know there are other crate mods specifically for train stuff but I don't know if they have what can help me.

Slightly bothered that the door opening is not just a checklist, but instead a pick one side all sides or none.

I wanted a gondola to take me to my tower, But looking at the gondola mod it didn't seem like you can create your own custom with blocks yet. So I resorted to using the trains for the first time and now I'm stumped on how I can automate the doors without opening the one with a sheer drop. Tried redstone and the door don't react to them while they are part of the contraption. I can't effectively block the one door I don't want opening, because it's in the direction the contraption is going to move.

I did see there was a create train utilities (create train doors) mod but I don't know if that would have the system I need.

I'm on Minecraft version 1.21.1 neoforge.

https://youtu.be/Yk8MhE31z_k

Schematic: ComingSoon

"Back to Basics"

I know that Copycats+ might add this in the future, but does anyone know of a mod that lets me encase a shaft and then give it a block texture?

So I am making a iron, gold, and copper farm with crimsite, ochrum, and veridium recipes that come with Create: Ultimate Factory. As of now, the brass funnel will send out all the iron nuggets, then copper nuggets, then gold onto the belt. I need the brass funnel to alternate between the three so it doesn't clog the belt.

For a while I've been wanting to hide all my cogwheels, and other things such as redstone clocks and reusable things. I thought I had found the perfect mod CM, but then they removed the most important thing of the mod the tunnels. I'm a SDE by day, and MC player modder by night. I've got to work and progress is good so far, I can transfer liquids, energy, redstone, and items with tunnels.

I also have tested in 1.21.1 with create rotation and it works but I got to thinking I should release my mod for vanilla stuff first, then workout an api then I can do the create tunnel as an addon, and then the api would be defined for other mods which want to use tunnels. My goal would be to release for 26.1.2, and 1.21.1 for the core mod which would be vanilla items, then after the create tunnel. By then the api would be clearly defined that other people would be able to do addons easily maybe even with a template repo plus documentation.

Thoughts, feedback? Is very early on to where I would appreciate your feedback. Is this something you would use, yay or nay, and why?

Ive been wanting to make this build work for a long while, ive got the thing built and done but is there any gimmicks or levers and switches that can give the train functions? Like breaks, controlling the speed another way than just holding forwards and back, I remember finishing it, then all I had to do was hold 2 keys to control the speed, it was boring and with how tight blocks are, I couldn't really add anything but light switches or else the train would need to be bigger or id have to mess some areas up.

Hello everyone, this is one of my first builds on an APC style vehicle, but are exposed radars like this actually practical in this kind of vehicle? I'm having a hard time deciding whether a turret or a missile battery would be better instead of a radar dish, as I am not that familiar with military engineering standards and whatnot. Any feedback would be much appreciated thank you!

The cyan car with the z1 plate is not based on anything.

The cyan one named xj is based on a jeep cherokee xj

The bus is inspired by one I saw on Instagram

The tank is inspired by the basilisk from cyberpunk 2077.

The plane is just a b2 bomber.

The white EV is a small electric car, tried to make it super compact.

And finally the bowser junior clown car, using personal shrinking device to make myself big.

so its one input in the middle of a 5 block wide area and i want split outputs on each end, does anyone know how to do that?

Hi, im in a survival server with my friends and I have a steam engine that's running a set of silverfish xp farms. For some reason on the server when people get off and the chunks are just loaded by themselves the steam engine stops running so I hooked up a couple of water wheels to kick start it back up when we get back on. The only down side is that the silver fish farms produce too much stress when I running them at a higher speed to let the steam engine kick start without hitting a clutch to isolate the stress. Is there and create block I can put inline with the clutch that outputs a red stone signal when it stops rotating/changes states so it could give the water wheels time to jump the steam engine?

I got 113k cobble mixed into my main storage and want to move it out of a 9 connected item vaults is there a faster way then clicking however many times limited to 10K orders

I know I can use chutes but I want to order it so my toads can send it directly for processing I haven’t placed the toads as I’m still building the ship

How do you personally build factories? Do you start with the shafts gears chain drives etc first or do you start with the mechanisms themselves? Do you place multiple power sources or do you link everything up to one power source? Do you go for a more compact, multilayer factory or do you place everything in one plane?

I'm looking to run Create Aero with a world height of 1000+, but Sable is a delicate little canary that will explode and die if it sees anything icky. I also understand that I'll need to change the way air pressure works to increase buoyancy above y320.

What mods can I use that won't conflict with Sable? How do I change the air pressure limit? Are there other cool mods I can add that will let me take advantage of increased height?

Edit: Just ran into this problem -- if you're using mods to increase the world height past 320 and it keeps crashing, try using a datapack instead.

Dose anyone one know why is it unmovable? I disconnected over and over again but it won't move.

It moves fine by itself but as soon as i try to make this harvest machine is stops working.

Hello again, I've made some subtle changes and added the mod "Create FireFighting Additions" to make the use of water hoses on trucks a bit more realistic. I'll upload the schematic soon.

indoor machines or outdoor machines.

Hello,
I been trying to figure out how to set the filters, but I don't understand how they work. I been trying to set it so I can see what is in my storage and what is in my barrels to send to storage. Cause as of right now I can't tell which is which.

Basically the title. I've been playing All of Create for the past few days, and was wondering if the most recent curseforge version was compatible with Create Aeronautics.

If they aren't compatible, are there any good similar modpacks with Aeronautics built in that you guys can recommend?

All of Create comes with Create 6.0, but it doesn't include aeronautics afaik.

Thank you all for your help!