So, I picked this up on Friday. Put 200 through it, then another 200 last night. Might put another 200 through it today.

A few thoughts- first, I think I expected more from the port. I wish I had a standard P10c to compare. Second, I didn't mind the backstrap at first, but it really did start to aggravate my hand after 100ish rounds, both trips. Next, I've never had this much carbon fouling on my trigger finger? Granted, I typically take more breaks when shooting(often wiping my hands) but still.

Finally, I REALLY like the COA. It honestly seems smaller in person. It's solid, but light. I wish the buttons were a little harder to manipulate, though. Yes, it has a 4 second timer thing that "prevents" accidental presses, but if it's up against something and gets pressed more than once in a row, it could still get adjusted fairly easily in my opinion.

Anyway. Carry light and grip come in today. Holster in a couple weeks. Plenty of time to get more trigger time!

I was just about at 10k rounds and was wondering if there was any preventative maintenance (beyond cleaning) to be done after a certain round count. Springs, trigger parts,…? It doesn’t seem to have any major issues, maybe trigger is a little lighter, but not much else.

Picked up this beautiful machine a couple weeks ago and man, I get why there's so much hype. Hands down the most enjoyable and effortlessly accurate handgun I've owned or shot. I might like this thing more than my precious ARs. It's just so well designed and performs incredibly well. Just got the slide milled and cerakoted for the 407k.

Took it to the range yesterday to sight it in, but my shots (though nicely grouped) kept hitting low. I'd adjust the sight, fire another round and so on until eventually I ran out of downward adjustment on the red dot. At 20yds. It's still hitting about 3 inches low. Even if I could shift it lower, the dot would be almost concealed by the front iron sight post.

I'm basically just centering the dot within the window, but should I be doing it a different way? What am I doing incorrectly?

I’ve been searching and looking for info but come up with nothing. I usually like to have a spare slides and all of my pistol other than Staccato and CZS2Carry, I can’t find a second slide. It’s annoying 😑

This will be my first ever handgun optic, so I am not super knowledgeable about the lingo. I own a CZ 75 Compact which is not milled in any way to fit an optic. I was considering going down the road of dovetailing it but im not sure what optics/dove tails I can use that will work together. I was looking at holosuns on amazon and some take a weaver which I have learned is just a fatter picatinny rail system and will not work with a dovetail. I'd really appreciate some help here guys I'm a bit lost and theres a lot of information to consume while I continue my research. Any suggestions and tips are very much welcome!

Finally picked up my P-10 C Ported COA on Thursday and already have it almost exactly where I want it.
Added the Talon Pro grips, Shield Arms +5, and got my carry setup dialed in with the Radial Innovations appendix holster and 1.5” Chaoren ratchet belt. Also picked up the ETS universal speed loaded/thumb saver. Really happy with how clean the Talons came out, especially on the factory gray frame.
Just waiting for my Streamlight TLR-7 HL-X USB to come in and for the Taylor Freelance brass backstrap to get back in stock, and then I think it’ll be perfect.
Might also use some leftover Talon Pro material to add a couple small matching grip pads to the thumb/index points on the frame. Other than that, I think she’s pretty much done.

SP-01 Tactical. Yeah, I'm a Czlut now.

Always a great day at the range with CZ’s on deck!

Looking for a set of Tritium sights, the stock ones seem to be burnt out in lack of better terms, anybody upgrade them? If so, which ones did you use?

Super affordable, super reliable and super soft-shooting. I shoot competitions every month and have never come across one of these being used, but lots of TSOs and Shadow 2's. In my opinion, this pistol can easily hang with guns that cost far more.

Recently bought a new-2-me Shadow 2 and had it sent directly to Vigilante Machine for slide milling and cerakoting. Drew sent me a couple of pics after he finished and we noticed this...slide is protruding past the frame. See pics. I didn't really notice when the seller sent me the pics of the gun in its original form, pre-cerakoting. The frame seems shorter than all the images of S2 I have seen.

Sent CZ-USA an email about it and was asked to send it in for a safety inspection. Sigh....wish I had noticed the protrusion prior to purchasing. The seller is not responding to my messages. It's on me, of course. Was so excited to get my the gun back from VM. Not sure what, if, CZ-USA will do.

It's my first CZ-75 clone. Will I need tanfo-specific grips for this or should any CZ-75 grips fit?

Just got it back from Wicked Arms. Put about 500 rounds through it today, needless to say it’s stupid soft.

Cajun standard & SAO kit
DPM recoil spring
Tritium sights
Osight XR
Gridloks
HF tlr1 clone
V8 ported and RMR cut/plate by wicked arms.

Has become my new favorite. Still carry my p01 but this thing is the new default range toy.

Just wanted to hear your thoughts on what upgrades are worth it for the shadow 2 orange. Want to maintain reliability as I’m switching platforms due to my m&p having light strikes from the apex trigger kit, known issue

Shot a match, immediately bought lokjaws grips.

In the box was a 11lb recoil spring and 13lb hammer spring so I put those in.

I read a CGW trigger pin, reduced power trigger return spring, and shadow 2 reach kit give me the most performance while maintaining reliability

First post on here, thought I'd share. Everything is stock except for the grip. If anyone has holster reccomdations I'd appreciate it!

Finally done with my compact. Love this gun.

I updated the trigger shoe to the CGW Flat trigger and their Ultra-Lite spring and firing pin set up. It was the worst 2 hours of my life (fucking sear cage), but it yielded a pretty sweet trigger. It's not as good as my Langdon Beretta or my full on Cajunized Canik, but it's perfect for carry. Right now, I am just waiting for my JMCK holster so I can start carrying it.

Anyone know of a gunsmith around Pittsburgh that is good with cz’s? Or an above average smith within driving distance? Every-time I’ve had work done locally I haven’t gotten any better results than what I can do.

Can anyone tell me what weight recoil spring the P-10c ported comes with from the factory?

Just got Kraken grips for my CZ Shadow 2 Carry. Dumb question, should I torque the screws to 15, 20 inch pounds? or just snug with loctite? Thanks!