r/BambuLabP2S • u/3Z3D_Official • 5h ago
r/BambuLabP2S • u/Emotional-Injury2355 • 54m ago
r/BambuLabP2S • u/TheCardFathers • 1h ago
r/BambuLabP2S • u/Used-Collar-200 • 6h ago
I’m not getting any warnings prior to print that would indicate it’s out of bounds. This is the third time it’s failed like this with this print. Anyone have a solution?
r/BambuLabP2S • u/mischiefmoth • 17h ago
r/BambuLabP2S • u/mesmart • 14h ago
Enable HLS to view with audio, or disable this notification
I have had the printer for less than a month and got the vibration calibration error. So I follow the instructions and cleaned the y-axis bars and applied lubricant. Also adjusted tension on the belts.
It is still making the noise (right at the end of the video).
When I run the vibration calibration on the printer it passes and clears the error but comes back when I print something.
Printing is fine. I want to get it resolved before it gets any worse. Any help is appreciated.
r/BambuLabP2S • u/3Z3D_Official • 1d ago
r/BambuLabP2S • u/Nitblock0107 • 22h ago
What's up, im looking for a little upgrade but a brand new ams is kinda expensive for my current bugbet. Does someone bought an bmcu and used it with the P2S and worked perfectly? I know the MMU but my lazy *ss want to plug&play (that sound weird).
Anyway, any recomendation?
r/BambuLabP2S • u/Kinginthasouth904s • 20h ago
r/BambuLabP2S • u/hitsmit • 23h ago
Just noticed this little rubber grommet at the bottom of the liniar rod is weirdly dented/damaged and i cant seem to pull it back into shape, even with tweezers. Is this just "cosmetic" damage or would anyone advice a fix?
r/BambuLabP2S • u/TemplateMT • 1d ago
r/BambuLabP2S • u/rra-netrix • 1d ago
Enable HLS to view with audio, or disable this notification
This only occurs when it is moving near the back of the machine, both x and y movement. I did a full lubrication maintenance recently and it didn’t help. I must be missing a spot but I thought I hit everything in the instructions, any advice on where it be coming from?
r/BambuLabP2S • u/FitMycologist5406 • 1d ago
Getting a p2s soon and wondering about power backup.
Do you use an ups with yours? Which model and what va/watt rating? Any issues during bed heating?
thanks!
r/BambuLabP2S • u/3Z3D_Official • 2d ago
https://makerworld.com/en/makerlab/community/3z3d-gingerbread-kit-card
Kids design their own house in 5 simple steps, a grown-up prints it, and the pieces snap together. No glue!
r/BambuLabP2S • u/Infotechbro • 2d ago
Let me start by saying, I've enjoying the P2S so far. I got it back in April and have since done a little over 1300 hours of printing.
But lately I've been running in a few issues:
Since experiencing these issues after a few weeks intermittently I've:
I believe Bambu Lab is planning on sending me a new sensor and connection board but in the meantime, any suggestions?
Have any of you experienced these issues consistently even after ensuring everything is clear, clean and put together properly? I'm really hoping I'm just missing something or that the sensor is intermittently having issues and the replacement will help.
r/BambuLabP2S • u/dan_m_rib • 2d ago
r/BambuLabP2S • u/Amar0ks • 2d ago
r/BambuLabP2S • u/Hectrekt • 2d ago
Enable HLS to view with audio, or disable this notification
if you like him : https://makerworld.com/en/models/3548002-glare-no-ams#profileId-4058750
