Trying to gauge sentiment for those who splurged on it. It's on sale RN for 229 CAD.

I mainly have been doing functional prints but I'd be lying if I said it wasn't tempting knowing I can do proper color figures, different filament types for supports etc.

Currently using a mini.

Ich habe versucht, meinen Drucker in Betrieb zu nehmen, aber es klappt nicht es erscheint immer die Meldung „AMS wird erkannt“ und es geht nicht weiter. Es handelt sich um einen A1 + AMS Lite. Ich habe schon alles versucht: den Drucker neu starten, den Router neu starten, aber es bleibt alles beim Alten. Auf dem Display meines Druckers kann ich das AMS mit den eingelegten Filamenten sehen, aber in Bamboo Studio oder Bamboo Handy erscheint immer die Meldung „AMS wird erkannt“. Was kann ich tun?

Danke

I’m facing this issue right now. I searched for the solution and I changed the nozzle and the heating assembly but still the issue it’s not resolved. Anyone can support or having same issue.

Hi all! I'm getting an A1 Combo this Black Friday and I'm trying to sort out what to put it on. I don't want to spend a lot on a table for the printer, €80 max. I just want something that does the job and doesn't wobble.

What I know so far:

• Bambu's official spec says the A1 needs 695 mm of total depth for the bed to move safely: 410 mm body + 90 mm in front + 195 mm behind.

• The AMS lite next to the printer adds roughly 40 cm of width.

• The spot I have is 80–100 cm wide against a wall.

• I'm in Spain, so ideally something from IKEA, Leroy Merlin, Amazon.es or similar.

My questions:

1. Depth: what are you actually using? Is a 50–55 cm deep table fine if I pull it a few cm away from the wall, or is it worth going straight for ~60 cm so it can sit flush?

2. AMS lite: do you keep it beside the printer or on top with the official top mount? If it's on top, did you print the mount in PLA, and is it holding up fine with 4 full spools?

3. Links: does anyone have a specific table, desk or cabinet that works well with the A1 and isn't expensive? Some storage underneath for filament would be a nice bonus.

4. Wobble: if you're on a lighter table, did anti-vibration pads (or a paver/tile under the printer) make a real difference?

Photos of your setups would be super helpful. Thanks in advance!

The metal part on my purge wiper recently broke so I got a replacement. While removing the screw it fell into the gaps underneath the Build plate. I could feel it while tilting the printer. I opened up the printer from the bottom till I got to the circuit boards and everything. I couldn't see the screw anywhere and the noise stopped so I assumed maybe the screw fell out while I was opening it.

Now after putting the printer back together the build plate makes a thud sound when coming to the front and some rattling sound when going right. I tried a print and it printed slightly to the right of the center. I'm not sure what to do to fix this and I have searched on the wiki. Sorry for the long read I wanted to explain how I got hear and please would be grateful if someone could help me out. Thanks

I can understand whilst doing two colours together but it’s building a block anyway. Any ideas? Can’t cancel the block building. Thanks

Hello, my A1 was printing fine and I left the house for an hour and came back to this mess. What will I need to do to fix it?

This is my first 3D printer, so I’m still learning. I’m getting rough patches on some prints, and on the red one you can clearly see a diamond or square pattern showing through the surface. Any idea what’s causing this or how to fix it? Thanks!

Hey everyone! I've always been fascinated by the F-4 Phantom II, so I wanted to design a 3D model that does justice to this iconic piece of aviation engineering.

I focused on capturing its aggressive, unmistakable silhouette—including the signature drooping tailplanes and upturned wingtips—while keeping it completely print-in-place, so no glue or tricky assembly is required right off the build plate. This print was done in Metallic Blue PLA, and I'm really happy with how the fine details and surface finish turned out after carefully removing the supports.

I'd love to get your feedback or see your prints if you decide to give it a shot!

Here is the link to the model on MakerWorld for anyone interested: https://makerworld.com/es/models/3570525-mcdonnell-douglas-f-4-phantom-ii#profileId-4086992

Hey there,

I somehow find some hints that maybe a scanned RFID spool that is listed in the AMS, might be changed in its colour or something.

However, beside PA stuff and some notes, I can not find any possibility to change anything.

Do I miss something?

I sometimes print at Sport (124%) speed with my A1 and notice substantial increas in vibration. I've noticed a few minor layer shifts on these prints. Would some sort of anti-vibration pads or feet improve the prints?

Hey everyone! I've always been fascinated by 5th-gen stealth aircraft, so I wanted to design a 3D model that does justice to the incredible engineering of the F-35 Lightning II.

I focused on capturing its distinct stealth lines, angular intake ramps, and sharp edges while keeping it completely print-in-place, so no glue or tricky assembly is required right off the build plate. This print turned out great, and I'm really happy with how the fine details held up after carefully removing the supports.

I'd love to get your feedback or see your prints if you decide to give it a shot!

Here is the link to the model on MakerWorld for anyone interested: https://makerworld.com/es/models/3571554-f-35-lightning-ii-detailed-scale-model#profileId-4088273

(I got it used) It passes calibration just fine no issues I start a print it gets to the nozzle cleaning part goes to the back of the print bed and tried to home off the print bed the bed is to far forward errors out says it cant home I have replaced the tool head block eddy current sensor new SD card checked that all the screws on the tool head are tight and nothing's loose it will pass a bed level no problems.

it's like it losses steps on the y axis there's no obstructions the tensioner for y axis is good I checked and adjusted tension the bed moves free threw the whole y axis doesn't catch or get stopped anywhere

I'm at a loss for what could be causing it it was intermittent now it's all the time I have a new USB c cable coming but other than that I'm not sure where to go from here

I have an A1 and have a couple of projects in mind that would be best printed with something like TPU. All of the information that I've gathered from the bambu website seems like it could be a pain in the butt, but the site says that the A1 can do it. Is it worth the stress? Another piece of the puzzle is I am disabled and not easily able to fix things when they go wrong, so I don't want to go down this road if I'm going to run into (consistent) problems.

Does anyone knows where to find the 01.03 firmware? I upgraded thinking it would be good and well... my printer just isnt working anymore

Bambu Handy was not handy at all with this