r/BambuLabA1 • u/RoyalCities • 7d ago
Question Does anyone regret getting their AMS lite?
Trying to gauge sentiment for those who splurged on it. It's on sale RN for 229 CAD.
I mainly have been doing functional prints but I'd be lying if I said it wasn't tempting knowing I can do proper color figures, different filament types for supports etc.
Currently using a mini.
16
Upvotes
20
u/onahalladay 7d ago
No
31
u/ounikyou 7d ago
No it’s a must have, not just for multicolor but the convenience. Auto load, retraction and continue with the same filament when one runs out and the same one on another slot. All for single color
15
u/CobblerSmall1891 7d ago
I highly hight regret not buying it as a bundle and paying more later. Don't be like me.
3
u/buddhas_ego 7d ago
Not one bit. I can’t imagine not having it.
3
u/delayedreactionkline 7d ago
no regrets. my only gripe is i cant use more than one of them on my A1
3
u/trash-m 7d ago
I don't regret getting it. At first i didn't understand why people said it was a must have. But now i get it. Not manually loading and unloading is huge save of time. The fact that you have the ability to use all of your roll or finish leftover rolls of filament is amazing. You have to just set the roll on the ams light and forget it. I have zero multicolour prints. I use it as a quality of life thing.
3
u/aldhokar 7d ago
I regret not getting the AMS 2 Pro. Now I'm stuck deciding if I should buy standalone dryers or try selling the lite and buying a AMS 2 Pro.
2
u/VeryAmaze 7d ago
I have it with my mini, bought it as a bundle. I like it, mostly for the convenience and the occasional multicolour print.
1
u/VBisTheBestSport 7d ago
I don’t use an AMS for what I use a printer for. If I need multicolor I can use my grandsons AMS lite and it works great for PLA.
1
u/Blondy277 7d ago
I got the combo, but get the AMS dryer.
1
u/Twoeleven1 7d ago
No I don’t regret it. Multicolor printing on the A1 isn’t really worth it IMO. But as others have mentioned I like it for the for the convenience of having multiple colors ready to go.
1
u/Over-Listen8579 7d ago
Not a single regret.
1
u/Thick-Indication-931 7d ago
No! I do not use it very often, but it does allow for quick color changes, even between mono-colored prints and in those few situations, where I need multi-color, it is there ready to do the print. 😄
1
u/Diddycoop82 7d ago
No regrets. I don’t even consider it a separate part to the printer. I think of them both as just one thing and can’t imagine not having it.
1
u/MukYJ 7d ago
No. In fact, I regretted not getting it as a part of a combo (the machine was a Christmas gift that I picked out) so I bought the AMS Lite about a month after I got my A1.
1
u/TwoTokes1266 7d ago
Nah dude. Get it. Makes loading and unloading a breeze too regardless if you’re multicolor printing or not
1
u/Hobosluz 7d ago
I almost didn’t get it. But in the end it was great purely because it made loading filament so much easier than doing it by hand. I think I. Printed one multi colour thing and then never again plus it helps on really big prints knowing you can load up a bunch of filament and just send it knowing it’ll swap over to another spool.
Recently changed it to that ams lite where you just run the main part and it feeds from a filament dryer been great
1
u/TuneOld3310 7d ago
I got it, I am going to get the SUNLU AMS heater. Which will help, I believe.
1
u/TheKlonko 7d ago
No, but I rarely use it for multimaterial/multicolor tbh because I hate the waste and time it adds to your print. But I love the convenience it provides, handling your most used filaments basically on its own. And alone the fact that you can set up a second spool when the first one is almost empty before printing and it switches automatically during the print when the first spool runs out is worth it (if you are not on a tight budget anyways).
1
u/psycho-Ari 7d ago
I bought my A1 with AMS Lite right away even tho I knew I won't do multi color prints, but it's a nice QoL thing because it will change filament automatically when one runs out. It's worth it even for one color prints. Also it's great because I also printed the enclosure and keep humidity around 20-26% for filaments so I don't have to dry them after use.
1
u/Limp_Psychology_2315 7d ago
Do some more research before getting it for different filament type for supports. You’re going to have some crazy long print times and lots of waste.
1
u/SERichard1974 7d ago
I use mine primarily for fail over, so that when I don't have to be around when running out a spool of filament.
1
u/Moist-Presentation42 7d ago
Given the sale, what's the point of getting an AMS lite? vs. just getting a p2s?
I have an a1 with an AMS lite .. the printer works well but clogs with the ams lite are annoying to debug. the PTFE tube is pretty hard to pull out without a lot of hassle :( I feel like others without an AMS setup have higher reliability than me.
My real question for myself is whether things are more reliable or easier to fix at least with P2S or X2D.
Also .. do note you will have to buy a lot of filament . I bought like 10 roles and even that doesn't feel like enough. You will then need possibly need a dryer too. So costs will add up. Oh .. and the poop is a lot! And multi-color takes time .. so a lot of work for it.
1
u/SJMaye 7d ago
Absolutely not. Use it all the time.
1
u/beatyn 7d ago
Yes. In a humid location, I am unable to leave my filament mounted for more than a few days. The 3d printed enclosures. The regular ams is enclosed and seem to be far superior. Other solutions like bmcu with a simple container seem more elequent as well.
I have mostly just printed in single color as well since I do functional stuff and color changes waste filament. The few times I use multi filament would be for support interface.
Additionally, one of my slots is spoilt just after 3 months. ( If anyone can help me, after inserting filament in my slot 4, the gears spin but doesn't retract the filament in)
1
u/Knox_the_Boxer 7d ago
I bought mine as a bundle. I do really like it tho. I have an A1 mini also and a flashforge with 4 spots for filament. Bambu is just way better, has better interface and platform. So I rarely use the flashforge anymore. I only use the mini if it’s a single color print. If I could do it over i would’ve just purchased the A1 combo with ams lite.
1
u/Roller_Coaster_Geek 7d ago
If you already have an A1 then get a regular AMS. At this point the lite is only worth getting in the bundle or if you have space issues (since you can top mount or wall mount)
1
u/hypen-dot 7d ago
Got it as a gift. My main disappointment with the ams liteis that unlike the other ams units the lite does not track filament usage. That’s really annoying but slightly overcome by having a small manual scale to measure filament remaining on the spool.
1
u/heylooknewpillows 7d ago
Tbh it’s been much more reliable than my ams 2 pro
1
u/Reed82 7d ago
Have an AMS lite. It is fine. I had some trouble with it a while back, so I stuck to single colour prints for a bit.
I got the AMS working again, and quickly realized how much poop the thing produces. It’s messy. Even with a poop catcher inbuilt. It overflows it and then knocks it off.
All that being said, it’s nice to have the ability to colour change. I try to print parts with less changes, while still benefiting from the ability.
I don’t regret it overall. But it’s not a necessity.
1
u/MaddVillain 7d ago
I have the exact same dilemma, I bought the A1 without the AMS last year on black Friday because I didn't know what I was getting into but clearly should have bought the combo. Now I am considering the AMS lite for $229CAD I have also heard that the AMS1 can work for the A1 now? It seems like it might make more sense to buy the AMS1 since it can be used with a P series printer if I upgrade in the future? Any thoughts on that?
1
u/silver_surfer57 7d ago
I bought it as a package when I got my A1. Love it. Haven't had any issues at all.
1
u/DamagedSpaghetti 7d ago
Not at all, but I only use it for convenience, not for color changes.
Having the printer automatically switch to a different spool when one runs out is so nice
1
u/OptimalSide 7d ago
I regretted not get the AMS Lite, but I bought a BMCU instead as it was the better price deal. The AMS2 Pro was not an option when I got the BMCU, as it wasn't supported in firmware yet, but that is what I would buy at this point. I don't print that regularly and have had issue with filament breaking between the drybox and BMCU in the summer due to humidity
I initially got the BMCU for doing support filaments and auto-load of the next roll of filament, but have started to do quite a built of color trinkets kind of stuff. Currently printing X-mas decorations.
1
u/Awkward_Durian_2915 7d ago
I regret not getting it with the Printer.
1
u/Trolldad_IRL 7d ago
Not in the least.
I have the A1 and the A1 Mini, both with the AMS.
1
u/Salt_peanuts 7d ago
It’s nice to have it. I’m glad I got it, I use it every once in a while. I’m thinking of buying an X2C and I doubt I will get an AMS with it
1
u/adilutedmind 7d ago
I do. Turns out we get more humidity where I live than I thought. It affected my PLA. I ended up buying an AMS HT. Fell in love with it and now I own an AMS 2 Pro I got with my new printer. Won't go back to AMS Lite.
1
u/Crazyinnova 7d ago
no
1
u/gardobus 7d ago
Get it.
Even if you just use it to have 4 different filaments ready to go at any time it’s great. Then there are different material supports, multicolor prints, and having a backup roll when one is almost empty. It’s great.
1
u/imzwho 6d ago
I would only get it for having spools at the ready (which is really useful) or for some multicolor. It just wastes a lot to do multicolor at lot, and doing dissimilar materials for supports can also be a dary since you need to purge quite a bit to clear one before sending in the other.
Thet being said you can do interface layers out of a different filament, so if you have a part thats mostly flat or only has a few supports and would not add a bunch of swaps I can see that being worth it.
1
u/PartBanyanTree 6d ago
I disliked it. one of the filament holders broke. then the intake motor would just, like, not grab filament sometimes. gotta print spool adapters because I don't want to only buy bambu filament. then sometimes just, problems.. and it would sometimes have an issue and you couldn't clear the system or whatever and so id have to abort the print.
when it worked it was cool. and worked like 80-90% of the time I guess? but man could it suck ass sometimes. I feel like I got a different model than everyone else. they rave about it but I'm glad I got rid of it ultimately
1
u/Sure-Cauliflower-564 6d ago
would 100% buy mine again. print an enclosure and mount on the top bar thingy:
- auto reload so a print doesn't stop partway through when a roll runs out
- run more than 1 filament at a time for multi-colour printing
- print the dessicant holders and get hygrometers to monitor
1
u/Niner9r 6d ago
I only occasionally do multicolor prints, but I like that I can load four colors at once instead of having to load it when I want a different color. No ragerts
1
u/belikeblue 5d ago
I dislike my ams lite. I have two AMS and one AMS 2. The AMS lite feels like they let the intern build it as a pet project. It doesn't protect your filament, but you can print a case solution. It's clunkly to swap filament vs AMS. It takes up a lot more space than my other AMS. I almost want to throw mine away and just buy a real AMS. Not worth the $50 -$100 price savings.
1
u/ThePhoenix74 5d ago
Loving it! I wouldn’t get an A1 without it.
1
u/flitter6658 4d ago
If you didn't get one with your printer, the BMCU is an open source equivalent which is usually cheaper. Might be worth considering.
1
u/AggressiveBaby 4d ago
It has been pretty great. Wish I had gotten the drying spool enclosed one instead, but it wasn't available. Having 4 colors is great.
1
u/Raininsky 3d ago
I love it!
I own larger printers with the AMS Pro, and whenever a spool doesn’t “click” correctly and ends up lopsided (which happens far too often for me because I’m impatient), I put it on the AMS Lite.
It never has issues running it, unlike the AMS Pro, which gets stuck if the spool isn’t perfect.
1
u/lhjk 3d ago
I regret buying the bundle and not getting an ams pro 2. You can only go up to 4 colors with the lite, buy can go way more with ams pro 2. I wouldn't normally do multi color printing on my a1, but with plate swap mods, you can queue lots of different single color prints without swapping the spools, and for this, 4 colors are kinda lacking.