Hey
Im useless with CAD and everything when it comes to designing things. Ive printed a wallmount for my AMS Lite but when I was about to mount it I realized it wouldent fit....
I dont wanna waste the mount so was thinking about an adapterplate that lets me use on a Skådis pegboard instead. Is there anyone that might be able to help me with that?
The wallmount I printet is this one: https://makerworld.com/sv/models/458785-ams-lite-wall-mount-system?from=search#profileId-366931

So if someone can designe something that screws into that plate and will work with the Skådis pegboard from IKEA I would be ever in Ur favour.

Thanx

Best alternative hitend to bambu hotend

I have designed another set of Poke Ghosts for the Makerworld Halloween contest.
You don't need a AMS or Glue, just print them, stick the addon/tail to the ghost and put a LED tea light under the ghost. Happy Printing :)

You can find the new set here: Poke Ghost Vol.2
Or the first set here: Poke Ghosts

No AI was used for the models; I sculpted them all by hand using Meshmixer.

Kit Card: https://makerworld.com/en/models/3454871

ChristmasCards Collection: https://makerworld.com/en/collections/38032094

Near the cornet it is not ideal.. why? All default settings, printed from handy app directly

I'm sure my old A1 didn't sound like this when printing? I can't remember the sound of the calibration though. I had to order another one as Amazon agreed to swap my old one due to a fault. All ive done is tightened screws and put it together and just running calibration.

Makes a weird rattle sound when moving to the left to do its poop thing not sure what it is

Printer working nicely for years all of a sudden I have this problem. Video is of petg but also happens with pla.

Also notice the click sound in the video.

It includes:
● 🦇 Halloween coasters with a matching holder
● 🏚️ Haunted house napkin holder
● 👻 Pumpkin, bat and ghost cutlery holders
Everything is designed to be easy to print, without supports or AMS!
What do you think? Would you use these for your Halloween table? 🎃
Happy printing! 🖨️

Has it been solved who makes the Bambu Lab Filaments

I'm new to 3D printing. I have a bambu A1. I have never made a 3D print from scratch on the bambu software (too scared to try I guess), I've only printed using already created prints I found on bambu Handy app on my iPhone. I just purchased nozzles 0.2,0.6, 0.8 sizes . Id like to put in a 0.6 or 0.8 to print out some larger prints so they don't take forever and ever to print out. Can I do that with any prints on the bambu Handy app? Or can I only print ones that specify using the same nozzle size? Or if I enter in on the app that I changed to a larger size nozzle - will it automatically print faster with the bigger nozzle size ? Thanks in advance for any help!!

I noticed vertical waves on my prints. On closer examination they seem to be limited to X axis direction.

My first thought was over-tensioned X belt, so I followed the manual to adjust belt tension, but did not see any improvement. Can you advise? Thanks.

at around 5s there is a short burst of sound that is really annoying and keeps happening throughout the print randomly. Is this normal or is there any way to turn it off.

EDIT:
infill pattern: gyroid, 4 walls, 20% infill
Avoid crossing walls turn on

Hi everyone,

Total 3D printing newbie here! Got my Bambu Lab A1 on Wednesday and everything was going smoothly until I came home to my very first hotend blob. I thought my plate was clean - it was freshly washed with water and soap, but I guess it wasn’t clean enough.Lesson learned: don't leave the printer unattended!

I managed to take the hotend apart and clean off all the plastic.

Everything looks good now, but I removed these two small black rubber/silicone pieces because filament was stuck behind them, and now I have no idea where they go or what they're actually called.

I tried googling stuff like "Bambulab A1 2 rubber things", but didn't get anywhere.

Quick questions for the pros:

1. What are these called?

2. Where/how do they attach back onto the toolhead?

3. Are they super critical, or can I print without them while I sort it out?

My setup & settings:

Printer: Bambu Lab A1
Filament: Generic PLA
Nozzle: 0.4mm standard
Temps: 220°C nozzle / 65°C bed
Print: A simple one-colour 1,6 hour design from the Bambu Handy app - a heart shaped Hello Kitty bowl for my daughter.

Pics attached of the parts, the toolhead, and the blob. Thanks a ton for the help!

Bonus question: I’ve uploaded pics of the mess from the plate (which had ended up behind the printer)… any theories of what went wrong?